Ambrell to Exhibit at Wire Dusseldorf 2014
Induction Heaters

Ambrell to Exhibit at Wire Dusseldorf 2014

Induction heating systems for wire heating applications will be displayed, and application experts will be on-hand to discuss projects Scottsville, NYÂ- — Ambrell, a leading manufacturer of induction heating systems, will be exhibiting at Wire Düsseldorf in Düsseldorf Germany on April 7-11, 2014. Ambrell will exhibit in Hall 11 at booth C74 at the Düsseldorf...

Read More »
Heaters

Electrical Ladle Heaters offer 70% net efficiency.

By heating ladles with electricity instead of gas, Kanthal Heaters enable aluminum producers and steel foundries to lower energy costs and CO2 emissions. Design allows same heater tube to be used for both heating and holding. Heating elements are arranged in reflector, allowing radiation to be accurately directed toward target area. With uniform temperature profile and no flame or streaming of...

Read More »
Laboratory Cold/Hot Plates heat up to +150°C.
Other Process Heaters

Laboratory Cold/Hot Plates heat up to +150°C.

Designed for laboratory research, cascade Model AHP-1200C31 ranges from -50 to +150°C, while single stage Models AHP-1200CPV and AHP-301CPV can reach -15 to +120°C. Thermoelectric systems incorporate temperature controller, data logging software, internal-to-external temperature switching, and RS-232 communications. With no moving parts, maintenance-free systems are suited...

Read More »
Ambrell Sells EKOHEAT for Forming Application
Induction Heaters

Ambrell Sells EKOHEAT for Forming Application

Client replaces cold bending/oven tempering process with more efficient induction process Scottsville, NYÂ- — Ambrell, a leading manufacturer of induction heating systems, has installed an EKOHEAT 65 kW/100 kHz induction heating system for stress relieving steel bars. The client was cold bending bars and then tempering them with an oven. The steel bar requires a 50 mm heat zone. The client...

Read More »
Other Process Heaters

UHPLC Columns contain monodisperse sub-2 µm porous silica.

Manufactured using Ecoporous™ silica process, Supelco® Titan UHPLC Columns offer performance greater than 250,000 plates/meter. Uniform particles are packed into rugged column beds that are stable over range of flow and pressure conditions. Columns optimize productivity of pharmaceutical and contract research organizations employing UHPLC for medicinal chemistry, toxicology, and clinical...

Read More »
Extended Temperature Ranges for Laboratory Research
Other Process Heaters

Extended Temperature Ranges for Laboratory Research

TECA (Chicago, IL) laboratory cold/hot plates can now heat up to +150°C. Designed for laboratory research, TECA introduces high temperature versions of several cold/hot plate models. A cascade system can boast a range of -50°C to +150°C (Model AHP-1200C31). Single stage systems AHP-1200CPV and AHP-301CPV can reach -15°C to +120°C. Versatility in the temperature range...

Read More »
Inline Heater suits high-purity solvent heating applications.
Heaters

Inline Heater suits high-purity solvent heating applications.

Constructed of electropolished 316L stainless steel withÂ- PFA and PTFE wetted surfaces, Frontier™ Series can be used in single pass or recirculating applications for safely heating chemistries such as EKC265, EKC8730, ST28, ST26, ACT690C, and IPA. Unit includes ½, ¾, and 1 in. tube stub fluid connections and accommodates flow rates up to 75 lpm at pressure...

Read More »
Immersion Heaters

Tranter and Westinghouse Sign Teaming Agreement to Provide Modular Low-Pressure Shell and Plate Feedwater Heaters (SP-FWH)

Wichita Falls, TX – Tranter, Inc. and Westinghouse Electric Company LLC., have entered into a teaming agreement to develop a new modular Shell and Plate Feedwater Heater (SPFWH) for use in the power industry. There has been virtually no change in traditional shell and tube feedwater heater designs over decades. Welded shell and plate heat exchangers are a recent technology based on gasket plate...

Read More »
Induction Heaters

Airgas' Advanced Fabrication Technologies Group to Exhibit at FABTECH

Company to Provide Welding and Cutting Expertise and Analysis to Attendees RADNOR, PAÂ- – Airgas, Inc. (NYSE: ARG) and its group of Advanced Fabrication specialists will exhibit at FABTECH 2013, North America's largest metal forming, fabricating, welding and finishing event, Monday, November 18 through Thursday, November 21 at McCormick Place in Chicago, Illinois. Airgas welding and...

Read More »
Miscellaneous Controls

Electric Process Heaters feature 4 kV rating.

Available in capacities from 6–100 MMBtu/hr, Electric Heaters and Thyristor Control Panels enable large scale applications that have been previously heated inefficiently by gas, oil, or other methods. These installations can now benefit from near 100% efficiency, zero on-site emissions, and precise temperature control.

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics