Immersion Heaters

Heat Trace Cable vs. Immersion Heaters

With the advancement in technology and increase in industrial demand, industries have started to mobilize over different heating methodologies, such as whether to use heating cables or immersion heaters. Heating cables are normally known as heat trace cables and can be used for various purposes- such as for viscosity control, residential roof and gutter, pipe tracing, temperature process...

Read More »
Desiccant and Membrane Dryers

Energy Savings on Process Heating Units

A leading supplier of performance polymers with products used in a wide range of applications, including adhesives, coatings, sealants, lubricants, etc. was increasing the production capabilities of one of its four polymer process lines.Â-  The increase in production capabilities would come from the upgrade of several process heating sources such as heat exchangers and dryers as well as...

Read More »
Control Panels

UL 508A Compliant Heaters Being Offered from DBK USA

Safety is a critical feature for electrical components, and in the past, there were no written guidelines from the NEC to the electrical inspector that ensured electrical safety for control panels. The NEC came up with a new installation code, Article 409, which became effective January 1, 2005. In this new article, it requires that industrial control panels must be marked with a short circuit...

Read More »
Water Heaters (HVAC)

Heat Pump Water Heater cuts facility's carbon footprint.

Consisting of 2 pieces of equipment, Ilios™ HEWH-500-AS Split SystemÂ- combines engine-driven heat pump portion, which is contained in small acoustic enclosure within building mechanical space, and remote air-source evaporator package, which can be placed outside mechanical room. Since remote evaporator has minimal service needs, it can be placed in difficult-to-access...

Read More »
Induction Heaters

Energy Savings with New Induction Units

More efficient air conditioning without loss in comfort Tobias Lorson's goal is lower energy input without a reduction in comfort level. The team leader in Facility Management at Robert Bosch GmbH sees a promising path to more energy efficiency in the refurbishment of the old induction system. Operational tests with the manufacturer LTG of Stuttgart, Germany in two test rooms have shown the...

Read More »
Ambrell Sells EKOHEAT for Wire Heating Application
Induction Heaters

Ambrell Sells EKOHEAT for Wire Heating Application

TheÂ- induction system will be used to heat various size copper wires for coating curing Scottsville, NY – Ambrell, a leading manufacturer of induction heating systems, has sold an EKOHEAT 60 kW/30 kHz induction heating system for a wire heating application. The client needed to heat various sizes of copper wire to 325 °C (617 °F) at a rate of 10 meters (32.8 feet) per...

Read More »
Surface Plates

Programmable Hot Plate allows direct work on heater surface.

Featuring 12 x 12 in.Â- milled-flat cast aluminum heater top, EchoTherm™Ã‚ Model HP61A offers even heating with ambient to 450°C range controlled to ±1°C of target. Programming is done via front panel membrane switch and LCD, and accuracy is 1% of reading. Unit stores 10 programs with up to 10 steps – temperature, temperature ramp rate, time – in memory...

Read More »
Other Process Heaters

Programmable Hot Plate features 12 x 12 in. top.

Equipped with 12 x 12 in. milled-flat cast aluminum heater top for even heating across surface, EchoTherm™ Model HP61A features temperature range of ambient to 450°C controlled to ±1°C of target. Accuracy is 1% of reading using platinum RTD sensor in heater top. Programmed through front panel membrane switch and LCD, unit stores 10 programs in memory. Hot plate has countdown...

Read More »
Davis-Standard's Global Advantage(TM) in Customer Service at NPE
Alignment Services

Davis-Standard's Global Advantage(TM) in Customer Service at NPE

Supporting customers after the sale is a priority for Davis-Standard, LLC and this will be evident at the company’s NPE booth. Davis-Standard’s aftermarket department will exhibit multiple feedscrew designs, fast delivery spare parts, a rebuilt Thermatic® extruder and a variety of extrusion control systems and upgrades. Feedscrew Services – Davis-Standard replacement or rebuilt...

Read More »
Material Handling Equipment

LEWCO Delivers (6) Custom Drum Hot Boxes for Oil and Gas Industry Provider

SANDUSKY, OH – LEWCO, Inc. recently delivered (6) custom drum hot boxes to a leading global technology provider for the oil and gas industry based in Alberta, Canada. The hot boxes are heated with electric, low watt density Incoloy® heaters and are serviceable up to 300° F. Each hot box includes a specialized control panel specifically requested by the customer. The control panels...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers