Bulk Boxes hold a ton.

Bulk Boxes hold a ton.

Extra-Duty Bulk Boxes have 2,300 lb capacity for heavy, dense loads. Boxes are available in 48 x 45 in. footprints, with 25 or 34 in. heights. Reinforced base has center steel runner and continuous reinforcing ribs. Boxes have 4-way entry for forklifts and pallet jacks; spring-loaded latches for quick assembly and collapse; collapsible side walls; and 0, 1, or 2 drop doors for easy access to...

Read More »

Analog I/O connects via network.

Additions to CompactBlock(TM) LDX I/O include analog and temperature blocks, plus networking. Analog blocks bring in current and voltage data from valves, pressure sensors, and related field devices. Temperature blocks accept signals from T/Cs and RTDs, and provide scaling for different device types allowing module to convert signal from any standard T/C or RTD into Fahrenheit or Celsius grade...

Read More »
Divider/Feeder provides representative samples.

Divider/Feeder provides representative samples.

PT 100 Sample Divider ensures that sample represents entire bulk instead of random samples taken out of buckets with spatulas or spoons. Rotating rifflers spilt up to 5 L of inhomogeneous samples with wide particle size distribution into 6, 8, or 10 representative sub-samples. DR 100 Vibratory Feeder ensures that divider is centered over inlet hopper for no-loss feeding. Feed rate is controlled...

Read More »
Steam Separator has no moving parts.

Steam Separator has no moving parts.

Eliminator removes entrained moisture, condensate, dirt, scale, and other contaminants in steam and compressed air systems. Internal baffle system extracts moisture and solids above 10 microns. System is self-draining without steam loss. Eliminator is available for operating pressures to 600 psig and capacities to 35,000 lbs per hour, with 1/2 to 2 in. NPT or socketweld connections, or 2 1/2 to 6...

Read More »

DC Mode Motor is based on ultrasonic standing waves.

DC Mode of motor operation yields moves of 1 nanometer. Its methodology combines resonant mode with non-resonant mode. Once in position, non-resonant mode can generate moves from 1 to 300 nm for ultra fine positioning. Features include unlimited travel and no intrinsic magnetic field. Ability to drive linear or rotary devices suits this technology to applications in semiconductors, fiber optics,...

Read More »
Liquid/Solids Separators vibrate solids away.

Liquid/Solids Separators vibrate solids away.

Liquatex(R) Separator uses vibratory motion produced by rotating eccentric weight at machine's center of gravity to remove solids from plant washdown wastewater, lint from laundry wastewater, and solids from cooking oil. Vertical component of motion accelerates breakdown of liquid surface tension, permitting uninterrupted flow of liquid through screen. Horizontal conveying component of motion...

Read More »
Portable Air Monitor includes downloading software.

Portable Air Monitor includes downloading software.

Microprocessor-based HAZ-DUST EPAM-5000, for environmental and indoor particulate monitoring, combines light-scattering dust monitoring with inline 37 mm filter cassette for concurrent gravimetric samples. It samples particles from 0.1 to 100 micrometers, using adjustable flow rate from 1.0 to 5.0 L/min, and reads particles from 0.001 to 20.0 mg/m3. Interchangeable size-selective sampling heads...

Read More »
Heat Stress Monitor can be hand-held or fixed-mounted.

Heat Stress Monitor can be hand-held or fixed-mounted.

Model hs-32 WBGT area heat stress monitor measures humidity, temperature, and radiant heat conditions that can cause heat stroke and likewise heat-induced illnesses. With on-board humidity sensor, hs-32 displays relative humidity and calculates Heat Index or Humidex. Other features include covered wet bulb reservoir, shielded dry bulb, removable sensors, and 2 or 6 in. globe. Set-up options...

Read More »

IR Thermometers utilize pulse laser technology.

Pyrofiber(R) AEMS non-contact, automatic emissivity correcting, IR thermometers are available with temperature ranges from 500 to 5400 deg F and target sizes between .040 and 2.300 in. dia at focal distances from 4 to 120 in. Microprocessor control measures temperature values faster than 1 msec data acquisition rate, which allows digital signals to be output at 70 emissivity/temperature readings...

Read More »
Steel Containers can be configured with multiple options.

Steel Containers can be configured with multiple options.

Folding Corrugated Steel Containers provide reduced freight costs (2.3:1 ratio) and maintenance-free storage of products weighing up to 4,000 lbs. Designed to work in unison with plastic collapsibles, containers are available in 45 x 48 x 33 in. and 48 x 63 x 34 in. sizes. They utilize hinged, half-drop access doors on either side to provide access for loading and unloading. Options include...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics