Additives

Michelman Featuring Environmentally Friendly Water-Based Binders and Surface Additives at the Waterborne Symposium

CINCINNATI, OH (February 14, 2017) – Michelman will feature a selection of its innovative and environmentally friendly binder and surface additive solutions at The Waterborne Symposium being held February 19-24, 2017 in New Orleans, Louisiana. Exhibiting at booth #120, Michelman will showcase solutions that enhance the barrier and functional properties of architectural specialty coatings,...

Read More »
Pin-in-Paste P1xP Holder uses IR reflow soldering.
Holders

Pin-in-Paste P1xP Holder uses IR reflow soldering.

Available for PCBs with thickness ranging in 1.0mm to 1.6mm, Pin-in-Paste P1xP Holder is designed with large pick-and-place area and clips. Featuring three-point, surface-mount solderable tabs, P1xP reduces number of insertion points. Providing irradiance of 0.08 mW/m² at 0° for TSOP33xxx series and 0.12 mW/m² for TSOP53xxx series, units are halogen-free and ROHS-compliant.

Read More »
CRP Automotive Delivers Comprehensive Coverage with Rein Automotive Cooling System Replacement Parts
Replacement Services

CRP Automotive Delivers Comprehensive Coverage with Rein Automotive Cooling System Replacement Parts

- Includes hoses, water pumps, belts, tanks, caps, thermostats, and sensors kits - Cranbury, NJ…CRP Automotive, a leading source of OE-quality replacement and service parts, delivers comprehensive applications with its new, comprehensive Rein Automotive Cooling System Program. The new program provides shops and technicians a full assortment of cooling system replacement parts featuring coolant...

Read More »
L-402 Linear Positioning Stage comes with crossed roller bearings.
Positioners

L-402 Linear Positioning Stage comes with crossed roller bearings.

Used in micromanipulation, test systems, and opto-mechanical alignment automation applications, L-402 Linear Positioning Stage is equipped with direct drive stepper motor or a DC-servo/ gearhead and rotary encoder. Designed with 0.12µm resolution and 0.5µm repeatability, unit offers velocity to 5 mm/sec and has half inch travelling range. L-402 features 22.5 mm wide XY and XYZ stack...

Read More »
FS700 Qseven Module comes with 1.0 GHz SoC processor.
Modules

FS700 Qseven Module comes with 1.0 GHz SoC processor.

With less than 5W of power consumption, FS700 Qseven Module is configured with 1GB or 2GB of DDR3 system memory and up to 16GB of eMMC Flash memory. Featuring HDMI graphics with resolution up to 1920 x 1200 and dual LVDS interfaces with up to 2560 x 1600 at 60Hz resolution, FS700 is designed with video, 2D graphics and 3D graphics processors, I/O interfaces of RS-232, LAN and 4x USB 3.0 and...

Read More »
Monitors

Workstation Monitor is calibrated with standards of NIST.

Eliminating need for periodic testing, WSMONITOR2 Plus Workstation Monitor is designed for monitoring single-wire wrist strap system. Featuring switch for disabling mat monitor circuit when not needed, product comes with shielded enclosure to stop false pass conditions. Meeting ANSI/ESD S20.20 Continuous Monitor standards, monitor comes with 100-240VAC power adapter with interchangeable plugs.

Read More »
HD-WP-4K-401-C Video Processor can display up to four 4K60 video sources.
Processors

HD-WP-4K-401-C Video Processor can display up to four 4K60 video sources.

Simultaneously displaying single HD, Ultra HD and 4K display, HD-WP-4K-401-C Video Processor presents more video sources on fewer displays. Product delivers crystal clear 4K video quality with smooth transitions. In Automatic mode processor's screen fluidly configures itself based on number of sources connected and supports Picture-In-Picture windowing. Designed with four USB ports, unit...

Read More »
Strip Fixture and Strip Retrofit Kits are DLC listed.
Lights

Strip Fixture and Strip Retrofit Kits are DLC listed.

Delivering 50,000 lumen hours at L70 standards, Strip Fixture and Strip Retrofit Kit are dimmable using 0-10 V controls. Delivering 2,750 and 4,000 lumens with 125 lumens per watt in 24 W and 36 W inputs, LS series measures 6 W x 4 in. H. and are used in storage and shops. Converting 4 ft. and 8 ft. fixtures into LED in mere minutes, RS series retrofit kit’s design fits into 4.25 in. and 5.25...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics