Hand Held Tester evaluates bearing temperature sensors.
Thermometers

Hand Held Tester evaluates bearing temperature sensors.

Featuring integrated heating block specifically designed for direct insertion of 4B ADB sensors, Hand Held Test Unit, with integral controls and temperature display,Â- heats sensor to desired trip point and allows real- life testing of sensor and temperature monitoring system. During planned maintenance or periodic testing, ADB bearing sensor tester can be used as diagnostic tool to verify...

Read More »
Catheters

Microcatheter enhances control during complex procedures.

Available in sizes compatible with 0.014 and 0.035 in. guidewires and in lengths of 100, 135, and 150 cm, Valet® is used for guidewire support, wire exchange, and contrast injections during coronary and peripheral interventional procedures. VeriTorque™ technology, combined with shapeable distal tip, helps physicians precisely control and position guidewire. Seamless, powder-coated shaft...

Read More »
OK International to Demonstrate Metcal's New MX-5200 at SMT/Hybrid/Packaging
Tweezers

OK International to Demonstrate Metcal's New MX-5200 at SMT/Hybrid/Packaging

CHANDLERS FORD, U.K.- OK International will demonstrate the new Metcal MX-5200 Soldering, Desoldering and Rework Series in Booth # 9-517 at the SMT Hybrid Packaging exhibition and conference, scheduled to take place April 16-18, 2013 at the Messezentrum in Nuremberg, Germany. The system offers the same increased productivity and process control as the MX-5000 Series, now with dual-simultaneous...

Read More »
Copper Cell Culture Products use thermal active gel insulation.
Shelves and Shelving

Copper Cell Culture Products use thermal active gel insulation.

Serving as portable tray to facilitate laboratory transportation, Gelf™ Pod increases incubatory temperature stability and will accommodate entire row of standard cell culture vessels. Gelf™ Pod Incubator, offering temporary storage solution for high volume cell culture laboratories, fits inside BSC and can be set up to provide CO2. Designed to fit into 6–6.5 cu ft benchtop incubators,...

Read More »
Medical Monitors

OSI Systems Receives $2 Million Contract for Patient Monitoring & Connectivity Systems

HAWTHORNE, Calif. -Â- OSI Systems, Inc. (NASDAQ: OSIS) today announced that its Healthcare division, Spacelabs Healthcare, has been awarded an approximate $2 million contract to provide patient monitoring and connectivity solutions to a prominent hospital in the Western U.S. region. Deepak Chopra, OSI Systems CEO, commented, Following a competitive review of technologies, we were again...

Read More »
Solvay Announces TranS1 VEO® Interbody Fusion System Uses Spinal Implants Made of Solvay's Zeniva® PEEK
Resins

Solvay Announces TranS1 VEO® Interbody Fusion System Uses Spinal Implants Made of Solvay's Zeniva® PEEK

Spinal Fusion Device Also Taps Radel® PPSU for Tubular Retractor ALPHARETTA, Ga. – Solvay Specialty Polymers, a leading supplier of high-performance polymers, announced that TranS1 Inc., a leading supplier of minimally invasive spinal implants and medical devices, based in Raleigh, N.C, has commercialized the VEO® Direct Lateral Access and Interbody Fusion System which incorporates...

Read More »
Work Carts

DPI Adds New Material Handling Products & Upgrades Shipping Operations

LATTA, S.C. – Diversified Plastics Inc. (DPI), a leading manufacturer of industrial-strength plastic containers for material handling, laundry and textiles, has added several new products and announced significant upgrades to its shipping operations. Among the new products include a new, heavy-duty 1.75-yard plastic tilt truck, perfect for moving and storing a vast array of materials. Built...

Read More »
Dispensers

Marlin Steel Builds Steel Enclosures for Blue1USA DEF Systems

Marlin Steel Wire Products, a Baltimore, Maryland-based manufacturer of sheet metal enclosures, built metal housings for the diesel exhaust fluid (DEF) storage and dispensing systems of Blue1USA of Georgia. Blue1USA turned to Marlin to protect its sealed DEF units - a green" technology used to clean engines on trucks. The system converts NOx emissions into harmless nitrogen and water and helps...

Read More »
Motors

GE Designs New Artificial Lift Products to Help Boost Oilfield Production Efficiency

• GE’s First Motor Cooling System Provides Lower Motor Temperatures • New Higher Efficiency Electric Submersible Motor Simplifies Installation • GE’s Newest Artificial Lift Products Underscore Commitment to Deploying Innovative Solutions FLORENCE, ITALY—Building on its reputation as a leader in developing innovative artificial lift technologies to help increase the flow of fluids from...

Read More »
Nails and Brads

Intramedullary Nail comes in 10 mm version.

Offering alternative to external fixators for tibiotalocalcaneal arthrodesis procedures, 10 mm DynaNail® Ankle Arthrodesis Nail expands use of intramedullary nails to patients with narrow bone anatomies that require smaller fusion devices. Eliminating external fixators minimizes surgery time and need for follow-up procedures. Leveraging shape memory properties of nickel titanium, nail...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers