Drywall Screws

Grabber's Unique Scavenger Head Screws Save Time and Labor Costs

New Coarse Thread Design Reduces Paper Burrs and Lasts Longer Alpine, UT - www.grabberman.com/ , an international distributor of professional-grade fasteners and construction products, announces the expansion of its pioneering line of Scavenger® Head Screws with Grabber's exclusive head design, which reduces paper burrs in drywall. Until recently, Scavenger screws were only available in fine...

Read More »
I-Mark(TM) I-Series Integrates Scribe or Dot-Peen Marking into Automation Systems
Miscellaneous Controllers

I-Mark(TM) I-Series Integrates Scribe or Dot-Peen Marking into Automation Systems

CHESTERFIELD, MICH - I-Mark(TM) I-Series (Integration) dot peen and scribe marking systems from Columbia Marking Tools (CMT) give users maximum flexibility with standard features that are typically offered by other manufacturers at extra cost. This model, specifically designed for easy integration into automation systems, is ideal for a wide range of applications and materials. The I-Mark...

Read More »
Pipe Heads

World Wide Metric Introduces Winteb Air Pipe Heads (Ventheads)

World Wide Metric has recently added air pipe heads to their wide variety of products. They have partnered with Winteb who is the world's largest producer of seawater resistant aluminum air pipe heads. Winteb air pipe heads are a sea water resistant aluminum air vent that protects against corrosion and requires no maintenance. These types of air pipe heads have a space and weight saving design...

Read More »
More Fine Boring Convenience Thanks to Bluetooth
Machining Heads

More Fine Boring Convenience Thanks to Bluetooth

The KOMET GROUP has equipped its fine adjustment head MicroKom® BluFlex(TM) with modern wireless networking to make setting work easier for machine users. By using a wireless connection via Bluetooth* technology, the KOMET GROUP has managed to disconnect the display of the fine adjustment head MicroKom® from the tool head. This has made the tool less sensitive in application and...

Read More »
Drill Heads eliminate spiral marks and grooves.
Machining Heads

Drill Heads eliminate spiral marks and grooves.

Available in standards sizes from 28–70 mm and customized solutions from 28–127 mm, KSEM PLUS B1 Heads with DFC guiding pads can handle drilling through stacked materials, inclined exits, and cross holes as well as interrupted cut conditions. Two effective cutting edges work well at high feed rates to minimize load per edge, compensate for radial forces, and prevent disk build up with only 2...

Read More »
HITACHI to Showcase Sigma G5 High Speed, Flexible SMT Modular Mounter, More Innovations at SMTAI
Machining Heads

HITACHI to Showcase Sigma G5 High Speed, Flexible SMT Modular Mounter, More Innovations at SMTAI

Dallas, Texas, USA - Hitachi HTA, a world-leading manufacturer of the Sigma G5 high speed, flexible SMT modular mounter, will displaying Hitachi's programming suite, including the EG-100 Component Library creation system, Patented (DDH) Direct Drive High Speed Head, and latest version Sigma Feeders.These innovative production systems will be exhibited in Booth #426 at SMTAI, in Orlando,Florida,...

Read More »
Beveling Tool Head removes boiler tube membrane and overlay.
Tool Heads

Beveling Tool Head removes boiler tube membrane and overlay.

Available to fit MILLHOG® end prep tools covering tube range from 7/8-3 in. OD, ESCO Membrane and Overlay Removal Head features proprietary inserts shaped like golf tees, rather than screws, that tap into place and can be rotated to utilize 360° cutting edge. As head rotates, holding forces of inserts are multiplied, which minimizes vibration and heat. Head can also hold beveling...

Read More »
Machining Heads

Parlec Reengineeres Precision Modular Boring System

Fairport, NY - Parlec, Inc., a global leader in toolholding and presetting solutions, has integrated several reengineered products into its Precision Modular Boring line. These products include a new Precision Finish Head, Twin Bore Roughing System, Large Diameter Boring System, and Small Diameter Boring System. It's exciting to introduce the first precision modular boring system that can deliver...

Read More »
Machining Heads

Parlec Announces Addition of New Automatic Tool Change Angle Heads

Rochester, NY - Parlec Inc., a worldwide leader in tooling and presetting solutions, is excited to announce the newest addition to its line of toolholders: Parlec by Gerardi Evolution Angle Heads. The automatic tool change (ATC) angle heads provide modular ability with interchangeable shanks and positioning pins, resulting in the option to use the angle heads on multiple machining centers despite...

Read More »
BIG Kaiser Further Expands Comprehensive Line-Up at IMTS Booth W-1600
Machining Heads

BIG Kaiser Further Expands Comprehensive Line-Up at IMTS Booth W-1600

Hoffman Estates, IL - BIG Kaiser Precision Tooling Inc. continues to expand its product line, staying true to its mission of bringing the highest quality, most precise, most reliable and most accurate tooling and accessory products to market. Products showcased in BIG Kaiser's 2012 IMTS portfolio carry the same genes as their established predecessors, designed to ensure productivity through...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics