Thread Rolling Heads feature quick-change shanks.
Machining Heads

Thread Rolling Heads feature quick-change shanks.

Quick-change shank allows Axial Thread Rolling Head to go from installation in screw machine to CNC lathe and to CNC machining center. Shanks are compatible with VDI, HSK, CAT-V, and straight shanks. For work on multitude of machines, rolling heads can be equipped with designated shank, or single shank can be provided for several rolling heads.

Read More »
Thread Rolling Heads have pre-synchronized design.
Machining Heads

Thread Rolling Heads have pre-synchronized design.

Offered in T120F, T160F, T220F and T350F models, Tangential Thread Rolling Heads set up with no roll timing and feature 10 min thread roll changeout. Symmetrical roller repositioning is performed with central setting screw, away from rolling system. Accommodating thread diameters from 5/64-2 in., products allow for adjustment from coarse to fine and extra fine pitch threads. Heads feature carbide...

Read More »
Orbital TIG Weld Heads use on-board wire feed system.
Weld Heads

Orbital TIG Weld Heads use on-board wire feed system.

ORBIWELD TP Series covers range of tube and pipes from 10-275 mm OD. Models TP600 and TP1000 handle pipe diameters up to 170 mm and 275 mm, respectively. Both heads can be used with or without wire feed units. Drive mechanism of arc gap compensation mechanism ensures consistent profile around circumference of tube. Compact, lightweight design facilitates handling and use.

Read More »
Orbital Forming Head has no-maintenance design.
Machining Heads

Orbital Forming Head has no-maintenance design.

With life expectancy measured in years, Gold Series incorporates stack of angular contact bearings as primary forming element, increasing allowable thrust load. Able to handle short/long cycles, hard materials, and multiple production shifts, product features .005 in. runout accuracy and lubed-for-life bearings. It is suited for jobs that require additional capacity in smaller envelope, such as...

Read More »
Balancing Equipment facilitates high-speed machining.
Machining Heads

Balancing Equipment facilitates high-speed machining.

Balancing Equipment, available with 1- or 2-plane measuring capabilities, has setup software that identifies location of unbalance on toolholder. It allows for balancing methods including balancing rings, or basic drilling for metal removal. Unit comes with standard clam ping spindle, in CT 40, CT 50, HSK 40 or HSK 63 Forms A through F. Equipment is designed for use with ThermoLock® Shrink...

Read More »
Weld Heads suit limited access applications.
Weld Heads

Weld Heads suit limited access applications.

Designed for welding closely packed stainless steel tubes and fittings in pipeline systems, Orbiweld S series slim line weld heads feature quick fit Snap In collet system. Design incorporates water cooling channels around weld head body, and all main process functions are controlled on in-handle panel. Suited for on-site use, applications include electronics, offshore, pharmaceutical, and...

Read More »
Heads

Gauging Sensor Head suits limited work envelopes.

Based on laser triangulation, Selcom® SLS 2401 offers stand-off distance of 1.97 or 3.15 in., depending on model, measuring range of 0.8 or 3.15 in., and spot size of 0.002 or 0.004 in. Class IIIb and optional Class II and Class 3R PSD-based unit features microprocessor-based Fast Light Control Circuit, which reacts in less than 8 Â-µs for error-free measurements up to 16,000...

Read More »
Water Jet Head operates at 5,000-24,000 psi.
Spray and Faucet Heads

Water Jet Head operates at 5,000-24,000 psi.

Stainless steel, SPIN-NOZZLE® Viper 24(TM) features cylindrical design that helps avoid bumps as it rotates on end of water jetting lance. Head is threaded to accept 2 nozzles, which are flush-mounted to minimize impact. Viper 24 rotates by reaction energy of high-pressure water it delivers, without any external driver, turning any standard lance into water jetting tool. Lances rated at...

Read More »
Weld Head targets applications with low radial clearance.
Weld Heads

Weld Head targets applications with low radial clearance.

Water-cooled, Model M34 covers tubes with OD from 12-46 mm and works with welding currents up to 200 A. It includes onboard wire feed unit and arc gap control mechanism, which takes into account any ovality in tube profile. Torch angle and wire entry angle can be adjusted to suit weld preparation and joint profile. Model M34 is suited for fusion-only welds as well as applications that require...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics