Laser Marking Heads feature low drift.
Lasers

Laser Marking Heads feature low drift.

Measuring 6.6 x 4.62 x 5.75 in., warpSCAN II(TM) Series provides long-term drift of less than 0.3 mrad. Dust-proof, temperature stabilized units are available in 7, 10, and 14 mm aperture sizes with marking speeds of 3.5, 2.5, and 1.5 m/s, respectively. Units can be customized with galvanometer mirrors and objectives as well as mounts for all laser types and image fields. All are equipped with...

Read More »
Tapping Head facilitates tapping of small holes up to ½ in.
Machining Heads

Tapping Head facilitates tapping of small holes up to ½ in.

Compatible with any small CNC using R8 or MT3 taper, Tension/Compression Tapping Head model PN 31163 includes tapping chuck and nine quick-change collets. It is compatible with ANSI-compliant inch (#0-Â-½ in.) and metric (M1.6-12) taps and has ¾ in. of float built in to maintain coordination of spindle speed and feed rate. Tool works seamlessly with PCNC 1100 mill, and can also be...

Read More »
Angle Head allows 90-deg cutting inside small bores.
Machining Heads

Angle Head allows 90-deg cutting inside small bores.

Available in CAT40/50 and BT40/50 tapers with BIG-PLUS dual contact interface and clamping range of .118-.236 in., Slender Drive Angle Head combines operations on one machine, eliminating potential for error created by multiple setups. Unit offers max speed of 2,000 rpm and is designed for drilling and light milling operations. Slender Drive is equipped with hardened and ground bevel and spur...

Read More »
Hi-Torque Angle Head 5-to-l Gear Ratio
Machining Heads

Hi-Torque Angle Head 5-to-l Gear Ratio

Coolant Driven Angle Heads develop up to l00 inch pounds of torque. The heads incorporate a planetary gear with a five-to-one ratio, ideal for applications where high torque at lower speeds is required. The angle heads are powered by an integral positive displacement ball piston motor driven by the machining centers higp pressure coolant system. Because spindle rotation is not required for power,...

Read More »
Faster Production and Lower Costs with Tube Sheet Pro® Grooving Tool
Machining Heads

Faster Production and Lower Costs with Tube Sheet Pro® Grooving Tool

Time-consuming fixturing and secondary operations are eliminated as groove quality is improved A manufacturer of heat exchangers was drilling, reaming, and grooving holes in tube sheets on a vertical CNC mill. The grooving tool in use wouldn't work properly on the CNC machine, due to slight variations in the surface height of the tube sheets. The tube sheets had to be taken to a radial arm drill...

Read More »
Special Twin Coin Punch Tool Achieves Chamfer Diameter and Location Specs, Greatly Reduces Costs
Machining Heads

Special Twin Coin Punch Tool Achieves Chamfer Diameter and Location Specs, Greatly Reduces Costs

Special tool based on Cogsdill recessing head design used a coining arbor to punch the hole and chamfer in the bottom of the reservoir in their master cylinders. The tool fed into the bore and then was offset, which caused the punch to make contact with the surface. They could only manufacture one punched hole at a time. The method by which the tool was offset caused deflection problems,...

Read More »
Boring and Contouring Heads
Tool Heads

Boring and Contouring Heads

Dramatic Improvements in Quality and Productivity Subcontract machine shop had to obtain high quality threads in a very deep bore, with a smooth transition to a 30° angle. The large part, made of stainless steel and Inconel, was about four and a half feet in length and could not be rotated. The part was machined on a horizontal boring mill. The bore in the end of the part closest to the...

Read More »
Visit BIG Kaiser at IMTS Booth F-2114 to See the Newest in Precision Tooling
Machining Heads

Visit BIG Kaiser at IMTS Booth F-2114 to See the Newest in Precision Tooling

Elk Grove Village, IL - BIG Kaiser Precision Tooling Inc. will showcase a number of product lines at IMTS 2008. Visit BIG Kaiser in the brand new West Hall at Booth F-2114 to see the newest in precision tooling from BIG Daishowa, Kaiser, Speroni, Sphinx, Unilock and more. BIG Kaiser's new EWN Digital Boring Head offers diameter adjustments of 1 micron that can be easily seen on a high-contrast...

Read More »
Machining Heads

Programmable Head attaches to 3-axis CNC milling centers.

With Model 5414, any 3-axis CNC machine can be converted to provide simultaneous 5-axis machining and drilling capability. Head attachment utilizes A2 tool steel in drive block and main bevel gears, and 17-4 stainless steel in spindle and worm gear housing. Inpro spindle seal virtually eliminates potential spindle contamination. Offering 20-40 K rpm, high-speed spindle options are achieved...

Read More »
BIG Kaiser Showcases the Newest in Precision Tooling at Eastec Booth #5244
Machine Spindles

BIG Kaiser Showcases the Newest in Precision Tooling at Eastec Booth #5244

February 28, 2008 Elk Grove Village, IL - BIG Kaiser Precision Tooling Inc. will showcase a number of tooling product lines at Eastec 2008. Visit BIG Kaiser at Booth #5244 to see what's new from BIG Daishowa, Kaiser, Sphinx, Speroni, Unilock and more. BIG Kaiser's new Straight Shank FCR is designed for greater DOC and lower cutting resistance. Its geometry expands capabilities in multi-functional...

Read More »

All Topics