System Integration Enhances Factory Automation Capabilities
Machining Heads

System Integration Enhances Factory Automation Capabilities

Solon, Ohio...Bardons & Oliver, a leader in the manufacture of tube and bar cut-off equipment and CNC Turning Machines, offers system integration that can enhance factory automation capabilities. Bardons & Oliver CNC and Rotating Head machines are already maximized for efficiency but as an authorized Fanuc Robotics integrator, Bardons & Oliver can further increase factory efficiency by...

Read More »
Custom Fabrication of Lances, Headers, Injectors and More
Spray and Faucet Heads

Custom Fabrication of Lances, Headers, Injectors and More

Custom design and fabrication services to ensure optimal spray system performance are available from Spraying Systems Co. Spray lances, injectors, quills, manifolds, headers and showers that supply liquid and air/gas to spray nozzles are among the fabricated products offered by the company. Proper delivery of the sprayed liquid to the nozzles is important in overall system performance and working...

Read More »
Water Jet Tank Cleaning Head delivers flows up to 150 gpm.
Pressure Washing Equipment

Water Jet Tank Cleaning Head delivers flows up to 150 gpm.

Rated for operating pressures to 10,000 psi, Torrent(TM) 3-D head removes hardened resins and plastics using 3D water jetting action with high-velocity nozzles rotating vertically while head spins horizontally. Nozzle tips with carbide orifices extend reach of water jets, while long life seals and bearings and stainless steel body provide durability. Inserting head into tank or reactor on...

Read More »
Concave Surface Screw Head simplifies screwdriver insertion.
Fastener Heads

Concave Surface Screw Head simplifies screwdriver insertion.

EZ head(TM) is designed to reduce slip-offs, where screwdriver slips off head surface and requires realignment/reinsertion. Even if driver is inserted off-center, concave surface helps guide screw driver or bit directly towards screw recess. Design accelerates insertion of screw drivers from difficult angles or under difficult handling conditions. It can be fitted with countersunk head fasteners...

Read More »
Tregaskiss Upgrades TOUGH LOCK Contact Tip System with New Technology
Miscellaneous Tips

Tregaskiss Upgrades TOUGH LOCK Contact Tip System with New Technology

WINDSOR, Ontario - September 16, 2009 - Adding to its already high-performing TOUGH LOCK(TM) Contact Tip System, Tregaskiss has upgraded the design of its TOUGH LOCK Retaining Heads. At no additional cost to its customers, the TOUGH LOCK Retaining Heads now feature Tregaskiss' Dual Taper Technology - a second rear taper between the gooseneck and the contact tip. This design further improves...

Read More »
Laser Mechanisms' New FiberCut Processing Head Exceeds Expectations at LASER 2009
Plasma / Flame / Laser Cutters and Cutting Machinery

Laser Mechanisms' New FiberCut Processing Head Exceeds Expectations at LASER 2009

Laser Mechanisms recently introduced their new FiberCut processing head to enthusiastic crowds at the LASER World of PHOTONICS trade fair in Munich, Germany (June 15-18, 2009). While show organizers reported a slight downturn in the number of show attendees from the last LASER event held in 2007, Laser Mechanisms experienced a steady flow of activity - with many visitors wanting to discuss how to...

Read More »
A Matter of Life or Death Micromachining
Lasers

A Matter of Life or Death Micromachining

In the precision manufacturing of medical stents, qualilty is a matter of life or death. For this critical micro-machining, more fabricators from around stake their reputations on the exacting performance of Laser Mech's FineKerf laser cutting head. Engineered as a rugged, industrial-style unit for use in the medical processing field, the FineKerf head delivers consistent kerf widths as low as 5...

Read More »
Membrane Removal Head is designed for boiler tubes.
Machining Heads

Membrane Removal Head is designed for boiler tubes.

Capable of removing membrane and overlay from tube's outer surface, as well as bevel tube simultaneously, Membrane Removal Head is designed to fit 5 different MILLHOG® tools that cover tube range from 7/8-3 in. OD. It features Golf T inserts, which can be installed and removed without wrenches, and eliminate screws and head breakage. Head is available in 2 styles; to remove membrane only or...

Read More »
Laser Cutting Head suits 3D cutting of 0.5-6 mm thick metals.
Plasma / Flame / Laser Cutters and Cutting Machinery

Laser Cutting Head suits 3D cutting of 0.5-6 mm thick metals.

Engineered for 3D robotic cutting of metals using fiber-coupled lasers in harsh production environments, FiberCut compact, low moving mass head minimizes inertia transfer to robot support arm. All connections leading to head enter at right angle, including fiber, providing tight access to parts, cable routing and stress reduction on input fiber. Head works with all leading fiber-delivered laser...

Read More »
Grinder Polisher/Power Head streamline sample preparation.
Tool Heads

Grinder Polisher/Power Head streamline sample preparation.

EcoMet® 300 Grinder-Polisher can be used alone for manual grinding applications or combined with AutoMet® 300 Power Head for semi-automatic applications. Units feature variable speed controls, membrane keypad, LED lighting, retractable water hose, quick release chuck, replaceable bowl liner, and 360Â-º bowl rinse system. Metallographic grinder-polishing tools provide versatility...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics