RFID Read Head suits stand-alone and multi-drop applications.
Barcode Scanners / Readers

RFID Read Head suits stand-alone and multi-drop applications.

With read/write range up to 130 mm, IQT-F116-R4M-V1 RFID Read Head conforms to open 13.56 MHz ISO 15693 standard. Users can, in multi-drop applications, connect up to 30 RFID read heads together on one network and bring data back to PC or PLC. Two-wire RS485 connectivity and 200 mm M12 pigtail connectors facilitate connection and removal, while continuous read option, available for point-to-point...

Read More »
New Sidehead Option Gives VTCs Ideal Angle of Attack for Turning Work on Tall or Flanged Parts
Machining Heads

New Sidehead Option Gives VTCs Ideal Angle of Attack for Turning Work on Tall or Flanged Parts

Sidehead offers 1250 mm X-axis and 1900 mm Z-axis, with 40-tool chain magazine Erlanger, KY - A new sidehead option on MAG vertical turning centers (VTCs) utilizes a 250-mm-square (10 inch) ram to deliver 34,000 N (7,600 pounds) thrust from the optimum angle for efficient turning of tall or flanged parts in vertical orientation. The sidehead option is available on machines with table size 1,250...

Read More »
Introducing the Future of PO Pipe Extrusion in Vietnam
Pipe Heads

Introducing the Future of PO Pipe Extrusion in Vietnam

At an Open House from 4-5 August 2011 at its Haiphong facilities Vietnamese pipe producer Tien Phong Plastic Joint Stock Company showcased its new, innovative KryoSys pipe line for large diameter PO pipe extrusion from battenfeld-cincinnati (Vienna / Bad Oeynhausen). The programme and demonstration sparked great interest in South East Asia and Oceania and resulted in the participation of more...

Read More »
Cutting Heads facilitate milling, drilling, chamfering.
Machining Heads

Cutting Heads facilitate milling, drilling, chamfering.

End mills, each with 2 cutting edges, extend depth of cut for CoroMill 316 exchangeable head milling system to 0.8 x Dc. Ballnose option, suited for profile milling, aluminum machining, and finishing, also has cutting edge for profile roughing. Able to accommodate chip evacuation problems when slot milling, corner radius option suits slot/shoulder/plunge/face milling, ramping, and pocketing....

Read More »
Fire Protection Products facilitate inspection.
Tubes and Tubing

Fire Protection Products facilitate inspection.

Designed for home sprinkler systems, Residential Fire Protection line includes RF PEX(TM) Tubing, which features distinctive orange stripe, enabling inspectors to visually follow tubing throughout installation. Line also includes Lead Free PEX(TM) Fittings and Lead Free RF PEX(TM) Sprinkler Fittings, which accept all standard Â-½ in. residential sprinkler heads and will work with variety of...

Read More »
Orbital Fusion Head utilizes digital technology.
Arc / Resistance Welders

Orbital Fusion Head utilizes digital technology.

Measuring 1.7 in. wide, Model 860 welds tube from 2-6 in. and can be used in tight clearance applications for welding fitting-to-fitting or fitting-to valve. Enclosed autogenous weld head features over-close collet clamping system and full exchange water cooling system that allow for true 100% duty cycle. Digital encoder drive motors eliminate need for calibration.

Read More »
Twin Cutter Boring Heads resist corrosion.
Machining Heads

Twin Cutter Boring Heads resist corrosion.

Available in diameters from .787-8.000 in., 319 SW Series utilizes standard carbide inserts and provides coolant-through direct to cutting edge to optimize chip evacuation and lengthen tool life. Users can switch between balanced and stepped cutting by reversing insert holders. By not having to manually adjust insert height for different roughing methods, Series minimizes setup time and...

Read More »
Davenport Machine's High Precision (HP) Head Now Available as a Replacement Part!
Machining Heads

Davenport Machine's High Precision (HP) Head Now Available as a Replacement Part!

Davenport announces that their High Precision (HP) Head is now available for purchase as a replacement part. Until recently, the HP Head was only sold with the purchase of a new Davenport HP Machine. The head was designed to handle tougher materials and hold tighter tolerances, demanded under today's manufacturing specifications. The new design replaces the bronze bushings on the revolving head...

Read More »
Grinder-Polisher Power Head enables semi-automatic operation.
Tool Heads

Grinder-Polisher Power Head enables semi-automatic operation.

When paired with MetaServ® 250 grinder-polisher, Vector® LC 250 Power Head upgrades from manual to semi-automatic preparation of material samples. Unit provides single-force pressure from 0-11 lb on 1-4 samples. Pressure is set individually for each sample using analog pressure setting display on front. Power head, which does not rotate, uses mechanical sample loading and head positioning.

Read More »
Machine Spindles

Lyndex-Nikken Partners with Mimatic® Tool Systems to Offer Leading European Live Tools for CNC Lathes, with an Initial Focus on Mazak Lathes

Mundelein, IL - Lyndex-Nikken continues to build upon its inventory of leading live tools with the addition of products from Mimatic Tool Systems' impressive line. Designed and manufactured to Mazak specifications in Germany, Mimatic live tools enhance the performance of CNC lathes. Mimatic live tool housings are machined from solid blocks of a special steel to achieve tight tolerances. Hardened...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics