Headers

Headers

Programmable Headers and Covers are RoHS-compliant.

Constructed of black UL 94V-0 glass filled 4/6 Nylon, Series 680 programmable headers and covers are available with either plain (solid) or top-slot press-on covers. They feature 3/4 hard brass alloy pins, as well as tin pin plating, and offer 50-150 m minimum matte tin per ASTM B545-97 over 50 m nickel plating per SAE-AMS-QQ-N-290. With current rating of 1 A, units have operating temperature of...

Read More »
Electrical Connectors

FCI Develops Quickie® Eye-of-Needle-Compliant Header

ETTERS, PA. (October 4, 2007) - FCI, a leading supplier of connectors and interconnect systems, expands its BASICS+ portfolio with an eye-of-needle version of the Quickie® header. Available with latches and in low-profile versions, these Quickie headers offer better application performance on lead-free PCB boards due to the eye-of-needle pin that facilitates insertion into PCB boards. The...

Read More »
Electrical Connectors

Vertical Headers suit blindmate applications.

Based on 4.2 x 4.2 mm centerlines, PE Series consists of wire-to-wire, wire-to-board, and wire-to-panel connectors available in even position sizes from 2-24. Contacts are rated for 9 A max and 600 Vac. Using headers, designers can create systems where exact positioning of connectors is aided by funnel lead-in of housing to permit alignment and mating. Applications include power supplies, vending...

Read More »
PCB Connectors suit high voltage applications.
Electrical Connectors

PCB Connectors suit high voltage applications.

Suited for wire-to-board applications, GMSTB(A) 2.5 HC(V) consists of high-voltage header and plug with screw connection. It features 7.62 mm pitch and voltage ratings of 1,000 V IEC, 600 V UL. Integrated double-steel covering springs provide contact safety even at high power, severe temperature fluctuations, and in high-vibration environments. Available with 1-12 positions, MKDS 5 HV fixed PCB...

Read More »
Electrical Connectors

Mouser Electronics Offers Complete FCI Basics+® Program

Mansfield, Texas, USA - April 19, 2007 - Mouser Electronics, Inc., the only distributor to release a new catalog every 90 days, today announced it is now offering the entire portfolio of products within the FCI Basics+® Program. The FCI Basics+® Program offers industry-standard connectors that provide convenient solutions for interconnect design challenges. FCI continues to keep the...

Read More »
Vertical Headers feature duplex-plated design.
Electrical Connectors

Vertical Headers feature duplex-plated design.

Available in single-row and double-row models, Bergstrip® unshrouded headers consist of 0.025 in. square pins installed on 0.100 in. pitch in continuous header body. Continuous strip can be cut to length as needed, giving users flexibility to customize for variety of header pin counts. Options are available for either 30 or 15 Â-µin. gold finish in contact area.

Read More »
Headers support pin-in-paste soldering processes.
Headers

Headers support pin-in-paste soldering processes.

Minitek(TM) 2 mm headers feature high-temperature plastic molded housings with design optimized for solder paste flow. Standoffs raise housing body above board surface to provide clearance for paste to be deposited and allow molten paste to flow freely from printed position into board through-hole and around each pin. Options include shrouded and unshrouded headers in straight, right-angle, or...

Read More »
Ejectors

3M Introduces New CompactFlash Brand Type II Card Ejectors for Long Guide CFII Headers

AUSTIN, Texas -- July 11, 2006--PCB designers can obtain greater design flexibility using three new CompactFlash (CF) Type I and II card ejector designs from the 3M Electronic Solutions Division. The ejectors can be attached to any of the already available 3M long guide CF II headers. 3M long guide CF II headers mate to standard CompactFlash Type I and II flash memory cards. 3M offers three new...

Read More »
Electrical Connectors

3M Introduces New, Low-Profile Four-Wall Header for Surface Mount Applications

AUSTIN, Texas -- July 24, 2006--Printed circuit board designers looking to conserve board space will be interested in the new, low-profile vertical surface mount version of the 3M four-wall header 2500 series from the 3M Electronic Solutions Division. The .100" x .100" connector allows surface mount components to be placed on the opposite side of the board. The surface mount tails on the...

Read More »
Headers

RAST Headers suit printed circuit board applications.

Based upon .250 x .032 FASTON tabs and built on 5 mm centerlines per European RAST 5 standard, FASTON RAST 5 Headers are fully shrouded and available with 2-8 contact positions. Tabs are tin-plated or sliver-plated brass and shroud housing is UL 94 V-0. Available in vertical and right angle configurations, headers are press-fit into PCB before soldering. Units mate with any RAST 5-compliant...

Read More »

All Topics