Material Handling System loads/unloads wide variety of parts.

Material Handling System loads/unloads wide variety of parts.

Configurable for inline or same-side load and unload operations, MH-900 Series supports both single and dual-lane conveyors and handles variety of parts from very thin strips to large boats and carriers. Programmable transport speed and carrier staging maximize units/hr while multiple carrier sensors, active pinch wheels, and thin strip guides ensure safe handling. Elevator and shuttle operate...

Read More »

Cashman Equipment Corp. Goes to Sea with KenBay's RotoPac

When Cashman Equipment Corp. needed industrial waste compactors for their two new floating barges they contacted the creators of the RotoPac, the original rotary arm waste compactor. KenBay, which has been marketing their RotoPac compactors in N. America for over 15 years, designed a marine compactor able to withstand the punishing saltwater environment. Utilizing over 4,400 ft-lbs of torque at...

Read More »
Storage and Retrieval Tower facilitates unmanned production.

Storage and Retrieval Tower facilitates unmanned production.

Designed for Orion 3015 Plus and Sirius 3015 Plus CO2 laser cutting systems, CT-Tower System allows optimal material flow and unattended operation with uninterrupted processing of laser cut parts. System provides capabilities for loading, unloading, and storage of raw material and finished parts. Available in 4-, 6-, and 10-pallet models, tower handles workpieces as large as 3,050 x 1,525 mm and...

Read More »
Bulk Bag Eductor loosens and discharges bulk solid material.

Bulk Bag Eductor loosens and discharges bulk solid material.

Designed to loosen bulk solid material that has solidified during storage and shipment, Bulk Bag Weigh Batch Eductor System discharges material by weight and blends it into liquid stream. Skid-mounted system incorporates 2 Bulk Bag Unloading Frames, each with integral Bulk Bag Conditioner comprised of hydraulic pump and 2 rams with contoured end plates that press opposing sides of bulk bags....

Read More »

The Pit Evacuator Model G

Waste Tec Inc. of Ormond Beach, Florida has developed another technology in the field of waste elimination. The Pit Evacuator Model G for lift stations. This unit grinds the Rags and Solids while evacuating the Grease from the lift station, mixing them together and discharging everything directly into the sewer, eliminating the need to be pumped thru the existing pumps, which results in less...

Read More »
Materials Handling and Assembly Starter Kit

Materials Handling and Assembly Starter Kit

The Creform Starter Kit has been devised to specifically suit smaller manufacturers and assemblers/processors looking to instigate a clever materials handling system at an early stage from the ground up. Distributed and managed nationally by Industrial Conveying (Aust) Pty Ltd, Creform Starter Kit is a simple and economical method to acquaint new users with the Creform Materials Handling System -...

Read More »

Adept Technology to Demonstrate Advanced Packaging Solutions Lead by the Highly Capable Quattro s650H Robot at Motek Exhibition 2009

Packaging Solutions and High Throughput Featured in Booth Enable Manufacturers to Exceed Production Requirement while Reducing the Total Cost of Ownership as Quantified by Cost-Per-Pick (CPP) Pleasanton, Calif.-September 14, 2009-- Adept Technology, Inc. (Nasdaq: ADEP), a leading provider of intelligent vision-guided robotics and global robotics services, today announced it will be demonstrating...

Read More »
New Case Packing & Handling Systems Technologies and DeepLane(TM) Pallet Flow Systems at Westfalia's Pack Expo Booth #S-4919

New Case Packing & Handling Systems Technologies and DeepLane(TM) Pallet Flow Systems at Westfalia's Pack Expo Booth #S-4919

No Need to Sacrifice Speed For Smooth Product Handling with Westfalia's Case Packing & Handling Systems Due to Innovative Load Heads, Grippers and Hybrid Power YORK, Pa., September 15, 2009 - Westfalia Technologies, Inc. is pleased to introduce its latest innovations in load heads, grippers and hybrid power for Case Packing and Case / Pallet Handling Systems in their 2009 Pack Expo booth #S-4919....

Read More »
Streamlining Aftermarket Fulfillment Increases Efficiencies for Gardner Denver

Streamlining Aftermarket Fulfillment Increases Efficiencies for Gardner Denver

100 percent increase in picking productivity with a 50 percent reduction in labor hours - Gardner Denver reaps the benefits by integrating its aftermarket fulfillment distribution center with the company's production facilities, while upgrading to a state-of-the-art picking system by Remstar. For any large industrial manufacturer handling 13,000 SKUs in their assembly parts warehouse, it is no...

Read More »
'Business Is Picking up!' at Lindy Paving with New Sennebogen Material Handlers

'Business Is Picking up!' at Lindy Paving with New Sennebogen Material Handlers

NEW CASTLE, PA - As part of the P.J. Dick family of construction and contracting companies, Lindy Paving has a voracious appetite for asphalt. The National Asphalt Paving Association awarded its prestigious Sheldon G. Hayes Award to Lindy for the top highway-paving project in the United States in 2005 and 2008 and placed second in 2007. To help meet the demand of its many projects throughout...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics