Load Transfer Equipment changes pallet types.
Load Transfer Product Line allows transfer of product to alternate load base for shipping or storage. Alternate load base includes pallet-to-pallet, pallet-to-sheet, or pallet-to-floor or truck deck. Fork lift driver places load onto receiving deck and pulls chord to start machine. After transfer, forklift driver can pick up load from any of 3 available sides.
Read More »
Cable-Blowing Machine installs micro-fiber cable.
Portable Breeze micro-fiber cable blowing machine features compliant double-driven rollers for secure grip of cable. Tornado, with hydraulic power pack, moves fiber-optic cable of 0.23-1.25 in. dia at speeds to 300 fpm into pre-installed innerduct or direct-buried duct. Model C2 Cable Lasher provides cable or bundle capacity from 1 5/8-1 7/8 in. and overlash capability. Duct Rodders are...
Read More »
Modular Gas Panel controls specialty gases at point-of-use.
Leak-free Model 57 controls gas pressure, purity, filtration, and distribution at single location when gas source is located in remote location. Unit can be wall or bench-mounted, or suspended from ceiling. Individual panels snap into prefabricated, expandable metal frame and are connected to primary gas supply with stainless steel tubing. Any combination of pressure regulators, purifiers,...
Read More »
Handling System improves flow of cohesive powders.
Powder Handling System consists of Type 3 bulk bag discharger, fitted with Hogan bin discharger and aero-mechanical conveyor. By using pneumatic massage paddles and bag tensioning device, Type 3 improves material flow out of bulk bag with no dramatic degradation. Aero-mechanical conveyor creates moving current of air in which powder flows, and Hogan bin discharger acts as flow promoter by using...
Read More »
The Ultimate Guide to Powder Coating
This white paper provides an overview guide to powder coating, a three stage process including pretreatment, application and curing.
Read More »
Flow Chutes offer belt-to-belt transfer of material.
INERTIAL FLOW(TM) Chutes provide custom-engineered flow of bulk solids in conveyor loading and discharge applications. Chutes consist of hood discharge chute, spoon receiving chute, and flow-engineered enclosure to contain stream of material. INERTIAL FLOW(TM) Transfer Points offer passive dust control, reduced material buildups and blockages, and reduced loading impact. Controlled load placement...
Read More »
Material Handling System is suited for finishing applications.
Model 142 eliminates hazardous manual lifting of finishing media and promotes productivity in metal deburring operations. Its rotary, 4-compartment hopper drops finishing media into as many as 4 round-bowl or tub-type machines below. Oscillator/screener separates finished parts from media, which then returns via conveyor to hopper for reuse or storage.
Read More »
Drum Grabs offer automatic grip lock.
Economy Gator Grips, for steel, fiber, and poly drums with open or closed heads, utilize Auto Grip Lock feature that locks grip-jaws closed and maintains positive lock on drum rim throughout transport. Effective even over rough terrain, jaws do not unlock until drum is placed on ground. Units are offered in 2 models: Single Drum Fork Mount, with 1,000 lb capacity, and Dual Drum Fork Mount, with...
Read More »
Cable Carrier attaches extra cable to tool belt or belt loop.
Rip-Tie CableCarrier is available with 2 1/16 in. nylon swivelhook, 3 1/8 in. aluminum carabiner, or 2 3/16 in. aluminum triangular carabiner. Non-load bearing carabiners come in matte silver and matte black. Max opening on 3 1/8 in. carabiner is 1 in. allowing it to hang from wide range of supports and equipment. Rip-Tie pull tab makes opening CableCarrier one handed operation. Product will last...
Read More »
Glue Totes transport glue and primer without spills.
Glue Totes are easily refillable and built with strong, comfortable handle, enabling glue and primer to be carried simultaneously without spills, waste, or need to tape cans together. Offered in 2 models for carrying quart- or pint-sized cans, totes are available with color-coded disposable Dauber refills.
Read More »Film Handling Platform minimizes film frame swap time.
Suited for back-end metrology and packaging process equipment, Film-Frame Handler(TM) supports 200 and 300 mm wafer film frames and can handle up to 50 film frames in one load. Modular system is based on SmartModules(TM) linear mechanisms and SmartServo(TM) distributed motion control architecture. Designed for SEMI S2/S8, it includes intelligent integrated sensing for cassette presence, size, and...
Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »
