Hand (Tool) Clamps

Hand (Tool) Clamps

Press Brake Clamping Components Eliminate Need for Set Screws

December 11, 2007 The PowerExpress-® die clamp and Express Clamp-® die holder from Wilson Tool International-® are designed to eliminate the need for set screws in press brakes to speed die changes. The automated hydraulic die clamp provides one-touch clamping for American-style press brakes. After loading the die, the operator presses a button to securely and accurately clamp the die in...

Read More »
Clamp Assembly offers corrosion resistance.
Hand (Tool) Clamps

Clamp Assembly offers corrosion resistance.

Optimizing quality assurance, Advantage Wing Nut and Clamp Assembly incorporates Advantage Wing Nut with Nitronic 60 coating, which resists corrosion and includes anti-galling properties. Tip and seat are precision-machined, providing positive lock, while electro-polished clamp offers corrosion resistance and smoothes screw head. Hex end on nut and available torque wrench allow for exact...

Read More »
Mild Steel, Machinable Clamp suits VMC, HMC applications.
Hand (Tool) Clamps

Mild Steel, Machinable Clamp suits VMC, HMC applications.

Offering means to hold lathe parts from internal diameter, No. 9 ID Xpansion Clamp has internal holding dimension of 6.89 in. that can be machined down to 1.15 in. Concentricity of .0005 can be held because clamp is machined to match individual workpiece, and flange diameter is held to close tolerance for precision mounting of multiple parts on workcube or fixture plate. Once machined,...

Read More »
Die Clamp and Holder speed press brake setups.
Hand (Tool) Clamps

Die Clamp and Holder speed press brake setups.

Offering 1-touch clamping for American-style press brakes, PowerExpress-® hydraulic die clamp is made in 2 ft modular sections that can be installed by single press brake operator. Upon loading die, operator presses button to securely clamp die in place. Another press of button unclamps die for fast changeouts. With pull of lever, Express Clamp-® mechanical die holder provides instant and...

Read More »
Connector offers set-and-forget wire termination.
Hand (Tool) Clamps

Connector offers set-and-forget wire termination.

Suited for applications where two-wire termination point is needed, LEVER-NUTS(TM) 222-412 two-conductor splice joins 3- and 5-conductor models in LEVER-NUTS(TM) family. It is UL/CNL listed up to 600 V/20 A, and can accommodate solid and stranded conductors ranging in size from AWG #12-28 in same unit. CAGE CLAMP-® termination technology provides maintenance-free connections and temperature...

Read More »
Clamping System uses electro-permanent magnets.
Hand (Tool) Clamps

Clamping System uses electro-permanent magnets.

Requiring small amount of electricity, MAGNOS Magnetic Clamping System enables 5-sided machining at high holding forces, without interfering contours of clamping device. Pole extensions act as workpiece support, allowing user to rapidly and precisely position different workpieces. Pole sizes of 50, 75, and 100 mm are available, enabling holding forces to be tailored to individual requirements....

Read More »
Hand (Tool) Clamps

Lock-Out Clamp limits access to hazardous piping.

Designed for use with hazardous high-temperature piping lines often associated with steam and CIP/SIP cleaning processes, Sanitary Lock-Out Clamp ensures that only authorized personnel have access to clamp. Hex-head nut that secures clamp is covered by extended shroud, which accepts small combination lock or key lock, preventing hex wrench from reaching head. Formed of 316 SS, clamp comes in...

Read More »
Machinable Clamps suit VMC and HMC applications.
Hand (Tool) Clamps

Machinable Clamps suit VMC and HMC applications.

Available in 10 sizes ranging from .160-4.050., ID Xpansion Clamp is made of mild steel. Machinable and used to hold lathe parts from internal diameter, clamp offers concentricity of .0005 that can be held because clamp is machined to match individual workpiece. Flange diameter is held to close tolerance for precision mounting of multiple parts on workcube or fixture plate, and, once machined,...

Read More »
Die Clamp moves in arced path to avoid sticking.
Hand (Tool) Clamps

Die Clamp moves in arced path to avoid sticking.

TBHS Escaping Arc Clamp features temperature-resistant design to accommodate applications where die swelling is an issue. Clamp design prevents die drops when pressure has failed with its mechanical safety detent, accommodates dies of 2-63 tons, and optional sensors detect clamped and unclamped positions. Applications include automated systems where sensing position is required. Escaping Arc...

Read More »
Hand (Tool) Clamps

DE-STA-CO to Bring Fresh Perspective to EASTEC 2007 with Horizontal Clamping Series

Auburn Hills, Michigan, March 1, 2007 - DE-STA-CO's booth at EASTEC 2007 will feature the Horizontal Handle Hold-Down Action Clamps, the company's latest generation of manual toggle clamps. Also located in booth #5854 will be the DE-STA-CO-® Toggle Lock Plus manual clamps, as well as DE-STA-CO Robohand's RZA Table-Top Linear Thruster Slide and DPW Parallel Gripper. EASTEC 2007 Exposition will be...

Read More »

All Topics