New Guides Products

Linear Guide Systems move 1,200 lb loads at 30 ft/sec.

Speed Demon OSG and SG Type Linear Guides are designed for speeds up to 32.8 ft/sec, accelerations to 50 m/sec-², and loads up to 1,259 lb. OSG models are available in 5 rail and block sizes, while SG versions come in 7 rail sizes and 19 block designs in 7 sizes to fit range of applications. Both systems are suited for use in X, Y, or Z axes. Integral felt wipers, high angular dual contact...

Molded LED Light Guides provide backlighting solution.

MicroLens(TM) molded light guides can be designed in sizes from 0.24-15.4 in. diagonal to provide single LED monochrome, bi-color, or tri-color backlights. Pixel-based light extraction technology provides transition area that spreads light uniformly, extracting light at each point across panel. With packages no thicker than 0.60 mm and power consumption of 1-20 mA at 3.5 V, applications include...

Rod Guides minimize tubing wear for extended tubing life.

Era-® Rod Guides take wellbore deviations, dynamometer readings, workover histories, well operating conditions, and production data into consideration for proper selection of guide design, material, and spacing for each well. Designed to reduce maintenance and provide solutions for down-hole tubing wear, products are also available in following types: High Performance, Classic, Rotating, and...

Linear Motion Guides feature rail widths down to 1 mm.

Ultra-Compact RSR Series includes Type RSR1M (1 mm rail width) and Type RSR2M (2-4 mm rail width), which feature minimal rolling resistance and 4-way equal load ratings. Built with martensitic stainless steel blocks, rails, and balls, products are suited for use in harsh environments. Blocks measure from 6.2-17 mm long, 4-10 mm wide, and 2.5-4 mm high with dynamic and static load ratings of...

How to Choose a Servo Controller for Your Application

Choosing the best controller for your specific application is of the utmost importance. This white paper offers an overview of feature and motion profile considerations.

Belt Supports work in conveyors with frequent wash-down.

SLIDEWAYS Plastic Belt Supports, made from UHMW or HT-UHMW, feature low-friction, wear-resistant surface over which plastic modular belts may glide. Providing non-metallic alternatives for applications requiring frequent wash-down, modular conveyor supports and guides can be made from various FDA/USDA-compliant thermoplastics. Products work with belts from 3.5-72 in. wide with multiple links or...

Automatic Product Guiding System reduces resetting time.

Used in areas where access for manual resetting of conveyor lines is limited or non-existent, guiding system enables automatic resetting to promote small production batch sizes and increased line utilization. Electrically driven guiding units control position of guide rails along line; up to 220 guiding units can be controlled from one cabinet. Designed for dry and wet production environments,...

Card Guide System is suited for harsh environments.

Offered in 1-4 slot clusters, 901 Series card guide cluster assembly features all-extruded aluminum construction that eliminates flexing and warping problems while providing flameproof protection and facilitating heat transfer. Guide decks provide added stability with anti-rotation front and rear tie bar rails. Standard colors include green (power supply), red (CPU), and smooth aluminum (I/O)....

Cable Roller Guide facilitates cable installation.

Designed to help guide and protect cables during installation, Model CR25 is suited for Cat 5, 5e, and 6 cables, as well as small diameter coax, NM, and THHN cables. Units are placed along path of cable installation where bend occurs and at additional points where cable needs to be guided. Accommodating up to 20 cables, Model CR25 includes nylon rollers to protect cable from damage and to...

Linear Guide Systems offer flexible configurations.

DryLin-® W linear guide systems, comprised of linear bearings and slides with plastic glide elements, are self-lubricating, maintenance-free, and contaminant-resistant. With overall height of 14 mm, products are available as combination of 2 supported round shafts in one profile, in split rail configuration, or with square rails. Slides, comprised of 2 or 4 gliding carriages, are made of...

Linear Bearing Guide suits harsh industrial environments.

Consisting of 4 sizes of V-grooved wheels and hardened steel raceways, V-Guide Systems come in carbon steel and stainless steel with stainless steel mounting bushings. Track is available with pre-drilled mounting holes in lengths up to 20 ft. V-shaped way configuration is self-cleaning, due to slight velocity gradient produced by change in wheel diameter over wheel to track contact patch....

Custom Fabrication & Machining Services with Over 30 Years of Experience

As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.