Grippers handle wide range of machining applications.

Grippers handle wide range of machining applications.

Designed for various machining and grinding environments, 3-jaw DTE series parallel gripper has sealed design, long finger capability, and optional stripper plate is available to hold parts against position stops during transfer into lathe. DTH series shielded grippers are available for harsh environments. Both models include multiple strokes per size, and standard purge/scavenge part that has...

Read More »
Pressing Tool Jaws crimp PEX tubing.

Pressing Tool Jaws crimp PEX tubing.

Conforming to ASTM F 1807 black copper crimp ring specifications, RIDGID-® Compact Series Pressing Jaws are available for crimping PEX and multi-layer tubing for radiant heat and potable water applications. Jaw ID clips, constructed of glass-filled nylon and marked with system and size information, facilitate identification of correct pressing jaw. Available in 6 sizes from 3/8-1-¼ in.,...

Read More »
Gripper suits internal and external assembly applications.

Gripper suits internal and external assembly applications.

Designed to fit O-rings not only to shafts, but also in holes, 6-finger Model ORG 85 features integral stroke and triple jaw sets that move independently from one another. O-ring is first released from first 3 fingers, and then released from last 3 fingers in controlled manner. Clamping width of diameter to be fitted ranges from 5-150 mm. Stroke of 2 sets of triple jaws range from 0-21 mm for...

Read More »
Gripper suits internal and external assembly applications.

Gripper suits internal and external assembly applications.

Designed to fit O-rings not only to shafts, but also in holes, 6-finger Model ORG 85 features integral stroke and triple jaw sets that move independently from one another. O-ring is first released from first 3 fingers, and then released from last 3 fingers in controlled manner. Clamping width of diameter to be fitted ranges from 5-150 mm. Stroke of 2 sets of triple jaws range from 0-21 mm for...

Read More »
Needle Grippers feature long-life titanium needles.

Needle Grippers feature long-life titanium needles.

GRN Needle Grippers come in 14 and 20 mm mounting shaft sizes and are compatible with entire line of modular end-of-arm tooling components. Designed to minimize downtime, pneumatically activated titanium needles are adjustable on all sizes and extend from 3-5 mm from gripper body. Optional sensor provides additional control. Applications include gripping lightweight, porous-type matting materials...

Read More »
Needle Grippers feature long-life titanium needles.

Needle Grippers feature long-life titanium needles.

GRN Needle Grippers come in 14 and 20 mm mounting shaft sizes and are compatible with entire line of modular end-of-arm tooling components. Designed to minimize downtime, pneumatically activated titanium needles are adjustable on all sizes and extend from 3-5 mm from gripper body. Optional sensor provides additional control. Applications include gripping lightweight, porous-type matting materials...

Read More »
DE-STA-CO to Showcase New, Patented Selection of Automation and Workholding Solutions at ATExpo

DE-STA-CO to Showcase New, Patented Selection of Automation and Workholding Solutions at ATExpo

Madison Heights, Michigan, July 17, 2006 - DE-STA-CO will feature its entire line of products ranging from manual clamps to automation solutions at this year's Assembly Technology Expo (ATExpo) in booth #611. ATExpo will be held at the Donald E. Stephens Convention Center in Chicago, Illinois from September 26 - 28. The newest product to join DE-STA-CO Robohand's impressive list of automation...

Read More »
DE-STA-CO to Showcase New, Patented Selection of Automation and Workholding Solutions at ATExpo

DE-STA-CO to Showcase New, Patented Selection of Automation and Workholding Solutions at ATExpo

Madison Heights, Michigan, July 17, 2006 - DE-STA-CO will feature its entire line of products ranging from manual clamps to automation solutions at this year's Assembly Technology Expo (ATExpo) in booth #611. ATExpo will be held at the Donald E. Stephens Convention Center in Chicago, Illinois from September 26 - 28. The newest product to join DE-STA-CO Robohand's impressive list of automation...

Read More »
Gripper suits food handling applications.

Gripper suits food handling applications.

Featuring corrosion-resistant, stainless steel design, Model GGL3060 is sealed according to IP69K standards, allowing it to withstand high-pressure and high-temperature wash-down. Jaws swing open to full 180°, and angular design of gripper provides up to 24 lb-ft gripping torque. Unit meets DIN 1672-2 guidelines for hygienic food production machinery.

Read More »
Gripper suits food handling applications.

Gripper suits food handling applications.

Featuring corrosion-resistant, stainless steel design, Model GGL3060 is sealed according to IP69K standards, allowing it to withstand high-pressure and high-temperature wash-down. Jaws swing open to full 180°, and angular design of gripper provides up to 24 lb-ft gripping torque. Unit meets DIN 1672-2 guidelines for hygienic food production machinery.

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics