Gripper suits internal and external assembly applications.
Grippers (Tools)

Gripper suits internal and external assembly applications.

Designed to fit O-rings not only to shafts, but also in holes, 6-finger Model ORG 85 features integral stroke and triple jaw sets that move independently from one another. O-ring is first released from first 3 fingers, and then released from last 3 fingers in controlled manner. Clamping width of diameter to be fitted ranges from 5-150 mm. Stroke of 2 sets of triple jaws range from 0-21 mm for...

Read More »
Needle Grippers feature long-life titanium needles.
Grippers (Tools)

Needle Grippers feature long-life titanium needles.

GRN Needle Grippers come in 14 and 20 mm mounting shaft sizes and are compatible with entire line of modular end-of-arm tooling components. Designed to minimize downtime, pneumatically activated titanium needles are adjustable on all sizes and extend from 3-5 mm from gripper body. Optional sensor provides additional control. Applications include gripping lightweight, porous-type matting materials...

Read More »
DE-STA-CO to Showcase New, Patented Selection of Automation and Workholding Solutions at ATExpo
Power Clamps

DE-STA-CO to Showcase New, Patented Selection of Automation and Workholding Solutions at ATExpo

Madison Heights, Michigan, July 17, 2006 - DE-STA-CO will feature its entire line of products ranging from manual clamps to automation solutions at this year's Assembly Technology Expo (ATExpo) in booth #611. ATExpo will be held at the Donald E. Stephens Convention Center in Chicago, Illinois from September 26 - 28. The newest product to join DE-STA-CO Robohand's impressive list of automation...

Read More »
Gripper suits food handling applications.
Grippers

Gripper suits food handling applications.

Featuring corrosion-resistant, stainless steel design, Model GGL3060 is sealed according to IP69K standards, allowing it to withstand high-pressure and high-temperature wash-down. Jaws swing open to full 180°, and angular design of gripper provides up to 24 lb-ft gripping torque. Unit meets DIN 1672-2 guidelines for hygienic food production machinery.

Read More »
Pneumatic Angular Grippers have fail safe toggle lock.
Grippers

Pneumatic Angular Grippers have fail safe toggle lock.

Series AGA Angular Gripper Actuator is offered in 5 models with gripping forces from 50-820 lb and 180° opening. Models AGA-20, 30, and 40 have stroke-limiting screws to adjust stroke between 0-180°. Double acting units have multiple airports, mounting locations, and are available with sensor options for interfacing to electrical controls in applications that must be performed within...

Read More »
Grippers (Tools)

Gripper Arm suits space restricted applications.

Spring loaded for part compliance, GEP End Ported Gripper Arm has air line connection directly in line with vacuum cup mounting for use in applications with minimal clearance around target area. Unit is available in diameters of 10, 14, and 20 mm and in 5 lengths from 64-146 mm. Arm can be mounted by clampable shaft or threaded shaft with jam nuts.

Read More »
Grippers

Parallel Grippers feature wide body design.

DPW series feature DIRECTCONNECT(TM) technology and offer mounting patterns in 3 sizes, with 2 strokes per size. Able to be mounted directly to other modular automation products without adapter plates, products can withstand over 10 million cycles. Wide body design provides secure gripping of parts, and jaws are supported throughout length of gripper body for long finger applications. Gripper can...

Read More »
Angular Grippers feature fully sealed design.
Machine Tool Parts and Accessories

Angular Grippers feature fully sealed design.

Offering adjustable stroke and gripping force up to 2,700 N, GG Series Grippers are sealed against dust, dirt, and coolant, allowing use in machining and grinding environments and wet or dirty applications. Units feature up to 35° stroke per jaw to allow clearance for tooling fingers. Opening angle is adjustable via screw on top of gripper. NC models are available with spring failsafe...

Read More »
Angular Grippers have adjustable opening stroke.
Grippers

Angular Grippers have adjustable opening stroke.

GK Series is comprised of six 180° opening (2 x 90°) angular grippers suited for applications that must be performed within limited work area. Along with 0-180° stroke-limiting screws, product features gripping torques from 40-4,000 Ncm, C45 K steel jaws, and aluminum body. When jaws are completely opened, work piece can be freed without having to retract gripper. From open...

Read More »
Toggle Tongs Grippers offer closing force up to 4,200 Ncm.
Grippers

Toggle Tongs Grippers offer closing force up to 4,200 Ncm.

Designed to hold, squeeze, or cut wires, cables, and chains, Series ZK features hard-coated aluminum housing and chrome-plated hardened steel working parts. Model ZK22 cuts up to 3.5 mm OD copper wire, while Model ZK33 cuts up to 6 mm wire. With gripper in closed position, toggle is extended and guarantees mechanical self-locking. Two pins mounted on jaws can be used with optional mounting blocks...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers