Grinders cut and tear flax seeds into fine powder.
Cylindrical Grinders

Grinders cut and tear flax seeds into fine powder.

Utilizing water-cooled rollers and tooth profile for cutting and tearing flax seed into very fine powder, Model 88 WC Flax Seed Gran-U-Lizer(TM) grinders have capacities from 2,000-4,000 lb/hr, depending on grind size setting. Grinder design eliminates need for screens, thereby eliminating product stickiness and gumming. Larger and smaller versions are also available.

Read More »
Cylindrical Grinding

NUM's Solutions for Grinding Have User-Friendly Graphical and Conversational Programming (W082)

Exhibiting at IMTS 2006 in Chicago, Sept. 6 to 13, Booth D-3232 Chicago, July 31, 2006 NUM offers a family of cost-effective control systems well suited to address all aspects of cylindrical and surface grinding. Configured with a state-of-the-art CNC, motors/drives, and very user-friendly software, these off the shelf solutions" can be used in new machines or to retrofit existing machines. The...

Read More »
Screenings Conditioner installs in tight plant locations.
Material Handling Equipment

Screenings Conditioner installs in tight plant locations.

Featuring stainless steel tank enclosure and hopper, SPIRALIFT SC8500 takes screenings discharged from bar screen and washes, grinds, compacts, de-waters, and discharges them into container for disposal. It utilizes 2 hp auger as well as 5 hp grinder with 8 x 20 in. opening and cutter cartridge technology, which replaces individual cutters and spacers with one-piece cartridges. PLC-based control...

Read More »
Moyno to Exhibit Latest Wastewater Treatment Product Innovations at WEFTEC 2006
Wastewater Treatment Equipment

Moyno to Exhibit Latest Wastewater Treatment Product Innovations at WEFTEC 2006

Springfield, Ohio - Moyno will exhibit its complete line of water and wastewater products, featuring the field proven Moyno® 2000 HS System and the latest innovations to the Moyno® Annihilator(TM) grinders, at the WEFTEC show October 21-25 in Dallas at booth #5050. The Moyno® Annihilator(TM) grinders are twin shaft solids reduction units designed to ensure that harsh solids in...

Read More »
Electronic Angle Grinder features non-locking paddle switch.
Tool Grinders

Electronic Angle Grinder features non-locking paddle switch.

Equipped with Tacho-Constamatic speed stabilization, 6 in. WEP14-150 Quick operates at nearly 100% of no-load speed of 9,000 rpm up to full rated amp load of 12 A. Non-locking paddle switch automatically turns grinder off when dropped, while Quick wheel change system allows tool-less wheel changes, and safety clutch allows operator to maintain control of tool in event of jam. Providing max torque...

Read More »
Grinding Machine is CNC controlled and CE compliant.
Centerless Grinders

Grinding Machine is CNC controlled and CE compliant.

Featuring manually rotable regulating wheel slide facilitating angular infeed with up to 90 mm grinding width and cylindrical plunge grinding up to 127 mm, 255CL grinds parts with 0.5-15 mm dia and up to 125 mm lengths. Equipped for single, dual- and triple-track grinding, grinder incorporates Hydropol® concrete into machine bed for rigidity. Machine allows for front, rear, and wheel...

Read More »
CNC Grinder targets creepfeed applications.
Surface Grinders

CNC Grinder targets creepfeed applications.

Equipped with SMART control running on Windows platform, 24 in. Smart CNC Grinder offers conversational surface, criss-cross, plunge, and profile grinding modes as well as 4 types of wheel dressing models and range of factory-programmed canned cycles. Simulation mode allows users to simulate grinding path and dressing cycles by turning MPG handwheel. Offered with 24 x 40, 24 x 60, or 24 x 80 in....

Read More »
Material Processing Grinders

Ground Meat System offers high speed operation.

Model RS915 Ground Meat System includes RS71 in-line grinder, RS503 vacuum stuffer, and RS915 portioner to produce up to 128 one lb portions/min. It can be adjusted for accurate portion control ranging from .2 oz to 66 lb with maximum filling capacity of 24,000 lb/hr. Depending on user requirements, several knife and plate combinations are available for different types of ground meat products and...

Read More »
Planetary Grinder minimizes swirl marks.
Surface Grinders

Planetary Grinder minimizes swirl marks.

Three-headed Model BMG 435 is designed for multipurpose use on concrete, terrazzo, natural stone, and wood surfaces. On concrete, unit cleans and prepares surface, levels uneven areas, removes coatings, cleans glues and mastics, or polishes. Machine cleans dirt, grease, and scuff marks from terrazzo or natural stone, or grinds and polishes. For wood, BMG 435 cleans paint and coatings, and sands...

Read More »
See Toyoda's Newest Technology at Eastec Booth #1253
Machining Centers

See Toyoda's Newest Technology at Eastec Booth #1253

Arlington Heights, IL - Toyoda Machinery is gearing up for Eastec. The booth will showcase the newest machines and latest technology in grinding and horizontal machining. Products on display are to include Toyoda's GE4 and SelectG grinders and FH550S horizontal machining center. SelectG is an economical universal grinder designed for flexible, precise, small-lot work. The machine's wheelhead...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics