Angle Grinders feature vibration protection.
Equipped with 15 A motor, 7 in. Model G18SCY and 9 in. Model G23SCY deliver no-load speed of 6,000 rpm. User Vibration Protection technology minimizes full-load tri-axial vibration, reducing end user fatigue. Tools have vibration absorbing main handles, which are connected to motor housing with moving joint mechanisms and padded dampers. To make grinders comfortable for both right and left handed...
Read More »
Kalamazoo Industries Model KS690HV Belt Grinder Designed for Heavy-Duty Work
Kalamazoo Industries Model KS690HV Belt Grinder Designed for Heavy-duty Work The Kalamazoo Industries Model KS690HV Belt Grinder is designed for heavy-duty work with a 6 wide x 8 diameter 70 duro serrated contact wheel. The grinder features a 6 x 24 platten for flat work, a 5 HP, 3 PH TEFC motor with manual switch, a 400 CFM vacuum base, air belt tension, and a horizontal/vertical spark chute....
Read More »Die Grinders work within extended-length applications.
Available in 3,400 or 18,000 rpm versions, Extension Die Grinders are 1 hp straight-line air tools that work within long pipes, castings, and other extended reach applications. Products feature rear exhaust air motor and come in 19-¾, 28 1/8, and 36-½ in. lengths. Constructed of steel, each tool extension is designed for minimal vibration and does not spin during use. Safety-lock lever prevents...
Read More »KAPP RX 59 Uses High-Precision Grinding Process to Manufacture Rotors for Air Compressors
Industry Partners Collaborate with KAPP on Advancement in Rotor Grinding Technology BOULDER, Colo., (June 15, 2007)-Rotors used in air compressors can now be manufactured on KAPP grinding machines (Fig.1) by using a high-precision grinding process that not only optimizes and enhances the production process, but also provides quality uniformity not attained before. On the KAPP RX 59 machine, the...
Read More »
The ROI of a Full Service Manufacturer
Full service manufacturers incorporate a complete line of production capabilities to facilitate fast, cost-efficient manufacturing of complex products without the need for multiple contractors.
Read More »
Mini Chip Grinder eliminates handling of waste material.
Designed to be placed at source of offal, 10 hp Mini Chip Grinder processes offal from woodworking machinery such as panel saws and cross cut saws. Material up to 1 in. thick can be processed through cutter head, which has disposable insert tooling. Equipped with 10 ft x 6 in. material in-feed conveyor, grinder connects directly to dust collection systems to dispose of ground waste.
Read More »
Grinding Machine accepts variety of contact arms.
Equipped with 1 hp variable speed motor, Stationary Versatility Grinder utilizes -¼ x 2 in. wide x 72 in. long abrasive belt that can travel in either forward or reverse motion. Pivot mount assembly allows operator to adjust sanding belt to any angle for optimum comfort, while 4 in. diameter vacuum port enables connection of dust collection systems. Full range of contacts arms is available for...
Read More »Monzesi Group to Exhibit at Eastec, May 22-24, 2007
(Sparta, NJ) - April 9, 2007 - Monzesi Group will be one of many companies participating in EASTEC Advanced Productivity Exposition (APEX), taking place on May 22-24, 2007, at the Eastern States Exposition Grounds, West Springfield, Massachusetts. Monzesi Group will display a Monza 410 CNC 1 Centerless Grinder with MonVibro Automation, Coral Mist Collector and CFS Coolant Filtration System....
Read More »Metso to Supply a Grinding System to Boliden in Sweden
Metso Minerals will supply a grinding system for a new concentrator at Boliden's Aitik mine in Gällivare, Northern Sweden. The new concentrator, with the grinding circuit, is scheduled to start operation in 2010. The value of the equipment order is approximately EUR 39 million. Metso's order comprises two AG (autogenous) mills and two pebble mills, complemented by engineering, erection and...
Read More »CNC Machine Tool grinds spheres and aspheres.
MicroTol(TM) features configurable work area that is totally enclosed for coolant containment. Standard X-axis travel is 8 in., while standard Z-axis travel is 4 in. Work area consists of a hydraulic chuck supported by Accura(TM)'s hydrostatic work spindle and hydrostatic bearings that provide added damping. The 20,000 rpm air bearing wheel spindle is rigidly mounted to machine base on...
Read More »
See Toyoda's Newest Technology at Eastec Booth #1205
Arlington Heights, IL - Toyoda Machinery is anticipating a busy and exciting 2007 Eastec. Toyoda's booth will showcase the newest machines and latest technology in grinding and horizontal machining. Products on display are to include Toyoda's SelectG grinder, FH450S horizontal machining center and SP2016 bridge type machining center. Toyoda's SelectG is an economical universal grinder designed...
Read More »
Simple Connection – MGB with EtherNet/IP
The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.
Read More »
