Electric Generator produces 6,100 W.
Electrical Power Generators

Electric Generator produces 6,100 W.

DP6000 can run for 12 hr at half load and 9 hr at full load. It has electric start 12-hp Kohler engine with cast-iron cylinder sleeve and quiet muffler. Low-oil shutoff helps extend life while automatic idle control provides better fuel economy and helps prevent surges when operating power tools. It has maintenance-free, brushless alternator; GFCI protection; hourmeter; and overload indicator....

Read More »
Generator adds additional power to boom lifts.
Electrical Power Generators

Generator adds additional power to boom lifts.

SkyPower(TM) generator provides 7,500 W of 110 or 220 Vac power at platform for added work efficiency. Power cable is routed from base-mounted generator through boom power track to GFIC outlet in platform. Air line is also routed through power track for operation of pneumatic tools or pressure washers. SkyPower is available on boom lifts with platform heights ranging from 40 to 135 ft.

Read More »
Power System incorporates lighting into boom lifts.
Electrical Power Generators

Power System incorporates lighting into boom lifts.

Sky Bright(TM) package uses 4 or 6 lights on platform to turn boom lift into 6,000 watt light tower. Power is provided by SkyPower(TM) generator delivering up to 7,500 W of 110 Vac power. Nite Bright(TM) accessory has four 40 watt lights mounted on chassis, and two 40 watt lights mounted on platform for work in low light conditions. Both options are available on boom lifts with platform heights...

Read More »
Stick/TIG Inverter provides simple operation.
AC to DC Power Supplies

Stick/TIG Inverter provides simple operation.

CST(TM) 250, produces 250 amps at 50% duty cycle and weighs just 40 lb. CST Rack with four CST 250 inverters weighs 328 lb. Operator interface includes On/Off switch, amperage control knob, infinitely adjustable from 5 to 250 amps, and process select switch that eliminates setting errors. Receptacle, on front of machine, permits remote amperage control when Stick or TIG welding. Inverter accepts...

Read More »
Welding Generator is driven by diesel engine.
Electrical Power Generators

Welding Generator is driven by diesel engine.

Trailblazer(R) 301 D boasts 300 A output and 10,000 W peak auxiliary power rating at 104 deg F. Multi-process, CC/CV machine provides 20 to 300 A dc output for Stick, TIG, MIG and Flux Cored welding. It also provides 35 to 225 A of ac current at 60% duty cycle for TIG welding. Generator is powered by 18.8 hp Kubota diesel engine that idles immediately when started. Welding arc is not affected...

Read More »
Frequency Converter transforms single phase to three phase.
Electrical Power Generators

Frequency Converter transforms single phase to three phase.

Compact BL3X350 delivers 350 VA per phase of clean, regulated 3-phase ac power from single phase input. Digitally controlled waveform produces clean power while protection circuitry provides for voltage fold back during overloads to maintain undistorted waveforms. Switch selectable, single phase input accepts 115 or 230 Vac at 47-440Hz, so it can accept any worldwide, shipboard or aircraft single...

Read More »
Logic Devices perform over industrial temperature range.
Clock Generators

Logic Devices perform over industrial temperature range.

Seventeen 3GHz to 4GHz PECL and LVPECL devices, part of ECL Pro(TM) communications logic solutions, include clock fanout buffers and clock dividers, drivers/receivers, and translators. They operate down to 2.5V single-supply and are guaranteed over -40 to 85 deg C temperature range. Fanout buffer family offers maximum frequency of more than 3GHz, pin-to-pin skew of less than 20ps, and tr/tf time...

Read More »
Signal Generators

Test Solutions accelerate wireless IC development.

VG3000E/VG6000 Synthesized Vector Signal Generator and VN6000 Wide-band IQ Demodulator form complete IEEE 802.11a test solution for wireless LAN development. Units feature RF bandwidth up to 120MHz (-3dB). Frequency ranges are 4.96GHz to 6.2GHz/250kHz to 3.2GHz for VG6000, 250kHz to 3.2GHz for VG3000E, and 4.96GHz to 6.2GHz/220MHz to 3.2GHz for Demodulator.

Read More »
Electrical Power Generators

Heat and Power Unit features Waukesha engine.

Plug and play CHPgen(TM) 375 modular, self-contained, natural-gas fired engine/generator system is capable of producing 375 kW of energy output with 88% total efficiency, while providing thermal energy in 205° hot water form. CHPgen Series of CHP units is available from 375 kW through 1400 kW of energy output. Features include on board heat recovery, remote monitoring and control, and air...

Read More »
REFU Frequency Converter offers worldwide compatibility.
Electrical Power Generators

REFU Frequency Converter offers worldwide compatibility.

System200 REFUdrive with SERCOS interface connects to Profibus DP, Interbus S, and CANopen. It has output ratings from 1.5 to 600 kW, and allows decentralized drive structures with servo drives and frequency converters. Unit's drive functions include speed control, torque and speed regulation. Components provide 5 sector-specific system solutions including machine tools, printing/paper converting...

Read More »

All Topics