Amplifier/Function Generators handle high voltages.
Signal Generators

Amplifier/Function Generators handle high voltages.

Models 609E-6-FG and 10/10B-FG will operate as dc stable high voltage amplifiers or function generators. They provide sources for externally amplified signals, adjustable high-level dc voltages, and adjustable high-voltage sine, square, or triangle waveforms. Both work over range of 0.2 Hz to 10 kHz. As amplifiers, 609E-6-FG is rated for 0 to ±4 kV and 10/10B-FG is rated for 0 to ±10...

Read More »
Electric Generators provide prime, portable, or standby power.
Electrical Power Generators

Electric Generators provide prime, portable, or standby power.

Packaged generator line can be used for commercial and industrial applications. Generators are available from 200 to 2500 kW in 4-pole, 1800 rpm machines in 4-frame diameters, and from 200 to 1750 kW, 3 phase, in 6-pole, 1200 rpm machines in 3-frame diameters. All standard 50 and 60 Hz 3-phase voltages are available up to 3300 V at 50 Hz and 4160 V at 60 Hz. Single-phase models are also available.

Read More »
Accessory Kit supports function generator users.
Signal Generators

Accessory Kit supports function generator users.

Model TLFG kit eliminates time consuming task of collecting cables and adapters just to get started. It has parts that are used every day, including: BNC (m) cable assemblies with RG-58C/U cable and molded bend relief boots; BNC (f) breakout with miniature alligator clips and 9 in. silicone wire; BNC (f) breakout with 0.031 sockets; MiniFlex IC clips; MicroClip IC clips; BNC (f-m-f) in-series...

Read More »
Pulse Generator uses standard 115 Vac power source.
Signal Generators

Pulse Generator uses standard 115 Vac power source.

Model 4030 10 MHz pulse generator is capable of producing pulsed waveforms with variable symmetry and amplitude to test digital logic circuits, shift registers, and response time of opto-isolators. Manual mode allows one pulse to be generated each time pushbutton is pressed. External triggering mode allows pulse generator to be synchronized to external signal, such as external clock frequency...

Read More »
Power System incorporates welder into boom lifts.
Electrical Power Generators

Power System incorporates welder into boom lifts.

SkyWelder(TM) system features Miller(R) Model CST 250 welder, which has 5 to 250 amp range and can be used for stick and TIG welding applications. Power leads run through boom's power track to 7,500 W generator mounted in engine compartment which supplies power to welder and to 110 Vac platform receptacle. Welder is integrated into boom lift's platform beneath the control panel. Available...

Read More »
Electric Generator produces 6,100 W.
Electrical Power Generators

Electric Generator produces 6,100 W.

DP6000 can run for 12 hr at half load and 9 hr at full load. It has electric start 12-hp Kohler engine with cast-iron cylinder sleeve and quiet muffler. Low-oil shutoff helps extend life while automatic idle control provides better fuel economy and helps prevent surges when operating power tools. It has maintenance-free, brushless alternator; GFCI protection; hourmeter; and overload indicator....

Read More »
Generator adds additional power to boom lifts.
Electrical Power Generators

Generator adds additional power to boom lifts.

SkyPower(TM) generator provides 7,500 W of 110 or 220 Vac power at platform for added work efficiency. Power cable is routed from base-mounted generator through boom power track to GFIC outlet in platform. Air line is also routed through power track for operation of pneumatic tools or pressure washers. SkyPower is available on boom lifts with platform heights ranging from 40 to 135 ft.

Read More »
Power System incorporates lighting into boom lifts.
Electrical Power Generators

Power System incorporates lighting into boom lifts.

Sky Bright(TM) package uses 4 or 6 lights on platform to turn boom lift into 6,000 watt light tower. Power is provided by SkyPower(TM) generator delivering up to 7,500 W of 110 Vac power. Nite Bright(TM) accessory has four 40 watt lights mounted on chassis, and two 40 watt lights mounted on platform for work in low light conditions. Both options are available on boom lifts with platform heights...

Read More »
Stick/TIG Inverter provides simple operation.
AC to DC Power Supplies

Stick/TIG Inverter provides simple operation.

CST(TM) 250, produces 250 amps at 50% duty cycle and weighs just 40 lb. CST Rack with four CST 250 inverters weighs 328 lb. Operator interface includes On/Off switch, amperage control knob, infinitely adjustable from 5 to 250 amps, and process select switch that eliminates setting errors. Receptacle, on front of machine, permits remote amperage control when Stick or TIG welding. Inverter accepts...

Read More »
Welding Generator is driven by diesel engine.
Electrical Power Generators

Welding Generator is driven by diesel engine.

Trailblazer(R) 301 D boasts 300 A output and 10,000 W peak auxiliary power rating at 104 deg F. Multi-process, CC/CV machine provides 20 to 300 A dc output for Stick, TIG, MIG and Flux Cored welding. It also provides 35 to 225 A of ac current at 60% duty cycle for TIG welding. Generator is powered by 18.8 hp Kubota diesel engine that idles immediately when started. Welding arc is not affected...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers