Helical Gears

Ondrives Gears Forward

A commercial and precision gear range is the latest addition to Ondrives' extensive product portfolio, further enhancing their newly launched power transmission series, states Marketing Manager, Amanda Laughton. The array of products offered broadly consists of bevel gears, worms & wheels, anti-backlash wormwheels, internal gears, anti-backlash gears, both parallel & crossed helical gears, spur...

Read More »
Pinion Gears

Preloaded Double Pinions eliminate backlash.

Designed to eliminate backlash between rack and pinion in linear motion applications, PDP is made of 2 ground WMH pinions, each Â-½ width of rack, connected together through coupling, preload system. Preload torque can be adjusted, and units are equipped with ISO 9409-1 flange for adapting to speed reducers. Offered with straight or helical gears in modules from 3-8, PDP accepts speeds up to...

Read More »
Cam Followers

High Speed Retractable Conveyor Relies on Intech PowerCore(TM) Components

High-speed retractable conveyors benefit from less friction, lower noise levels and lower power requirements. CLOSTER, NJ-Intech supplies critical low-friction components to retractable conveyor systems manufacturer KLEENLine (Newburyport, MA). KLEENLine provides the industry with literally the fastest retractable conveyors on the market today. Retractable conveyors basically pull the rug out...

Read More »
Ondrives Precision Bevel Gears
Miter / Bevel / Crown Gears

Ondrives Precision Bevel Gears

Ondrives Ltd have recently introduced a range of bevel gears into their precision gear range, all made in-house by the well-known gearbox manufacturer at their recently extended premises and factory in Chesterfield, Derbyshire. The straight cut bevel gears are made to Quality Grade 7f24 DIN 3985, with other Quality Grades available on request. Standard modules available are from 0.6 to 4.0 and...

Read More »
Precision Worms and Wheels come with any number of teeth.
Worm Gears (Gears, Worms and Sets)

Precision Worms and Wheels come with any number of teeth.

Available from 0.5 to 3.0 Mod, Precision Worms and Wheels come in regular backlash models as well as anti-backlash versions. Standard and anti-backlash 0.5 Module parts are made to Quality Grade 7e DIN 58405 and all other Modules in range are made to 7e25 DIN 3961. Customers can choose from either 817M40T steel or 303 stainless steel for worms and worm shafts. Tapped holes, pin holes, keyways,...

Read More »
Helical Gears

Intech Designs a Low Inertia, Zero-Backlash Gear for a Timing Critical Application

Closter, NJ: When one of our customers introduced a new machine for corrugating paper products, they came to us with a critical dilemma. How could they maintain precise timing between two shafts with corrugating steel teeth to prevent them from smashing into each other. To find a solution, we focused on backlash free, low inertia gear design. The traditional backlash free gear design consists of...

Read More »
Precision Gear Racks are offered in round or square versions.
Gear Racks

Precision Gear Racks are offered in round or square versions.

Available in module sizes from 0.5 up to 3.0 as standard, precision gear racks are offered in standard lengths from 400 mm and in increments of 600 and 1,200 mm long. Made of 303 stainless steel, round forms feature 0.5/400 mm straightness, 0.10 mm total pitch deviation and 0.4 Ra surface finish on diameter. Square racks come in at 1.0/1,000 mm straightness with 0.10 mm total pitch deviation, and...

Read More »
Crossed Helical Gears are available to application demands.
Helical Gears

Crossed Helical Gears are available to application demands.

Available from sizes 0.5-3.0 Module, 45Â-º crossed helical gears feature right hand helix that runs with another right hand helix. Gears are manufactured to Quality Grade 7e25 DIN 58405 (AGMA Q10), and other Quality Grades are available upon request. While standard materials are 817M40T (28 HRC) steel and 805M20 (58 HRC) case hardened steel, customer-specific options include tapped holes,...

Read More »
Spur Gears offer variety of standard and optional features.
Spur Gears

Spur Gears offer variety of standard and optional features.

Available with 0.5-3.0 Mod range, precision spur gears are manufactured to Quality Grade 7e25 DIN 58405 as standard and are available in 817M40T steel, 805M20 case hardened steel to 58 HRC, as well as 303 and 316 stainless steel. Standard number of teeth starts at 18 and go up to 250, with different numbers of teeth available on request. Anti-backlash versions are also offered, and modifications...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers