New Single-Stage Helical Gear Units Provide Thrust Load Capacity per Case Size
Power ranges from 30 to 60 HP, torque from of 3,540 to 8,850 lb-in. and ratio from 1.41 to 8.09:1. Suitable for pumps, mixers, conveyors and industrial fans. Offers multiple output shaft and mounting options.
Read More »
Screw Conveyors feature helical-bevel gears.
Part of Screw Conveyor Package, Right-Angle Helical-Bevel Gears are compatible with CEMA mounting and- allow users to install gearboxes in confined spaces. Units produce torque levels up to 42,480 lb-in. and powers up to 30 hp. Using direct coupled gearmotor or NEMA C-face input design, series eliminates need for separate V-belt.- Speed reducer housings, constructed of one solid cast-iron...
Read More »
Cast Iron Spur Gears offer high strength and wear resistance.
Cast iron Series GG25 spur gears are available from 1.5-3 Mod with between 18-98 teeth. Suited for engineering applications, products are resistant to destruction and weakening caused by rust. Gears are also available in 28 HRC steel, 58 HRC case hardened steel, 303 and 316 stainless steel, Peak GF 30-®, Delrin POM, titanium, and skive hobbed versions.
Read More »High Speed Retractable Conveyor Relies on Intech PowerCore(TM) Components
High-speed retractable conveyors benefit from less friction, lower noise levels and lower power requirements. CLOSTER, NJ-Intech supplies critical low-friction components to retractable conveyor systems manufacturer KLEENLine (Newburyport, MA). KLEENLine provides the industry with literally the fastest retractable conveyors on the market today. Retractable conveyors basically pull the rug out...
Read More »
UNLOCKING THE HIDDEN POTENTIAL OF MANUFACTURING: How lubricants can help increase productivity and reduce total cost of ownership
This paper illustrates how manufacturing companies have successfully worked with Shell Lubricants to upgrade their lubrication and extract value by reducing TCO and improving equipment productivity.
Read More »
Ondrives Precision Bevel Gears
Ondrives Ltd have recently introduced a range of bevel gears into their precision gear range, all made in-house by the well-known gearbox manufacturer at their recently extended premises and factory in Chesterfield, Derbyshire. The straight cut bevel gears are made to Quality Grade 7f24 DIN 3985, with other Quality Grades available on request. Standard modules available are from 0.6 to 4.0 and...
Read More »
Precision Worms and Wheels come with any number of teeth.
Available from 0.5 to 3.0 Mod, Precision Worms and Wheels come in regular backlash models as well as anti-backlash versions. Standard and anti-backlash 0.5 Module parts are made to Quality Grade 7e DIN 58405 and all other Modules in range are made to 7e25 DIN 3961. Customers can choose from either 817M40T steel or 303 stainless steel for worms and worm shafts. Tapped holes, pin holes, keyways,...
Read More »Intech Designs a Low Inertia, Zero-Backlash Gear for a Timing Critical Application
Closter, NJ: When one of our customers introduced a new machine for corrugating paper products, they came to us with a critical dilemma. How could they maintain precise timing between two shafts with corrugating steel teeth to prevent them from smashing into each other. To find a solution, we focused on backlash free, low inertia gear design. The traditional backlash free gear design consists of...
Read More »
Precision Gear Racks are offered in round or square versions.
Available in module sizes from 0.5 up to 3.0 as standard, precision gear racks are offered in standard lengths from 400 mm and in increments of 600 and 1,200 mm long. Made of 303 stainless steel, round forms feature 0.5/400 mm straightness, 0.10 mm total pitch deviation and 0.4 Ra surface finish on diameter. Square racks come in at 1.0/1,000 mm straightness with 0.10 mm total pitch deviation, and...
Read More »
Crossed Helical Gears are available to application demands.
Available from sizes 0.5-3.0 Module, 45-º crossed helical gears feature right hand helix that runs with another right hand helix. Gears are manufactured to Quality Grade 7e25 DIN 58405 (AGMA Q10), and other Quality Grades are available upon request. While standard materials are 817M40T (28 HRC) steel and 805M20 (58 HRC) case hardened steel, customer-specific options include tapped holes, pin...
Read More »
Spur Gears offer variety of standard and optional features.
Available with 0.5-3.0 Mod range, precision spur gears are manufactured to Quality Grade 7e25 DIN 58405 as standard and are available in 817M40T steel, 805M20 case hardened steel to 58 HRC, as well as 303 and 316 stainless steel. Standard number of teeth starts at 18 and go up to 250, with different numbers of teeth available on request. Anti-backlash versions are also offered, and modifications...
Read More »
Delivery Equipment That Really Delivers
Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.
Read More »
