Gearmotors

IP54-Rated DC Gearmotor develops 214 lb-in. torque at 23 rpm.
Gearmotors

IP54-Rated DC Gearmotor develops 214 lb-in. torque at 23 rpm.

Accepting any 12 Vdc source including battery power, Model MMP-TM57-12V GP52-195 is rated for 214 lb-in. continuous torque, at 23 rpm, and 443 lb-in. peak torque. Unit requires 7.2 A at 12 Vdc to generate full load torque, maximizing battery charge and allowing low-noise operation. With diameter of 2.24 in. and length of 7.75 in., reversible gearmotor has 12 mm dia, 25 mm long keyed output shaft,...

Read More »
Permanent Magnet DC Gearmotors and Motors feature brush-life sensor.
Gearmotors

Permanent Magnet DC Gearmotors and Motors feature brush-life sensor.

Type 42A permanent magnet DC gearmotors and motors include electronic brush-wear sensors, integrated into motor housing, that indicate when either of brushes is nearing end of its useful life. Sensor system allows OEMs to electronically monitor brush wear to maintain uninterrupted operation of PMDC gearmotors or motors. When equipped with sensors, gearmotors and motors can accommodate built-in...

Read More »
Explosionproof Brushless DC Gearmotor meets UL requirements.
Gearmotors

Explosionproof Brushless DC Gearmotor meets UL requirements.

Designed and tested to stringent specifications, type 22B-Z3 variable speed, 24 Vdc gearmotor meets UL Class 1, Division 1, Groups C and D Hazardous Location requirements for safe operation in explosive atmospheres. Motor winding is optimized to operate from solar-powered batteries, and gearbox is supplied with synthetic lubricant to handle outdoor temperature extremes.

Read More »
IP54 Sealed DC Gear Motor develops 214 lb-in. torque at 23 rpm.
Gearmotors

IP54 Sealed DC Gear Motor develops 214 lb-in. torque at 23 rpm.

Accepting any 24 Vdc source, 2.24 in. dia x 7.75 in. long Model MMP-TM57-24V GP52-195 has 12 mm dia x 25 mm long keyed output shaft and mounts via 4 face mount M5 threaded holes equally spaced on 40 mm dia BC. Continuous output is rated for 214 lb-in at 23 rpm, and peak output is 443 lb-in. Available with motor windings for 12, 28, 36, 48, 60, and 90 V, this 4 lb reversible motor requires 3.6 A...

Read More »
Parallel Shaft Gearmotor
Gearmotors

Parallel Shaft Gearmotor

Telco Intercontinental Corp's DC and AC parallel shaft gearmotors are designed for optimum performance and for maximum life under normal operating conditions. The range of rated torque is from 0.14 ~ 19.6 N.m. Gear Ratio is available from 37 to 2031:1. We also provide alternative ratio options to ensure the application requirement. Features oDesigned for optimum performance and for maximum life...

Read More »
Brushless DC Gearmotor features high torque gearhead.
Gearmotors

Brushless DC Gearmotor features high torque gearhead.

Electronically commutated type 34B, TENV, 1/5 hp (149 W) brushless DC motors with WX gear head series consists of 48 models with 12 available gear ratios ranging from 4:1 to 312:1, and rated output speeds from 8-658 rpm. WX gearheads feature AGMA 9 standard all-steel helical gear trains and synthetic lubricants. Series is offered with 130 and 24 Vdc windings and comes with or without accessory...

Read More »
Sensorless DC Gearmotors offer up to 300 lb-in. continuous torque.
Gearmotors

Sensorless DC Gearmotors offer up to 300 lb-in. continuous torque.

AUTONOmotor(TM) variable-speed, brushless DC, parallel shaft gearmotors offer up to 1/6 hp and 19-300 lb-in. continuous torque. Powered by totally enclosed, nonventilated brushless motors, units have all-steel gearing and oil bath lubrication and also provide noise immunity. Speed can be adjusted with supplied potentiometer or 0-5 Vdc signal. Devices are offered in 11 standard versions with gear...

Read More »
Sauer-Danfoss' SGM2 & SGM3 Fan Motors Now Offer Bidirectional, Fan Reversing, & Outrigger Bearings
Gearmotors

Sauer-Danfoss' SGM2 & SGM3 Fan Motors Now Offer Bidirectional, Fan Reversing, & Outrigger Bearings

Sauer-Danfoss introduces new options for radiator cleaning and slewing applications. AMES, IOWA, USA - SAUER-DANFOSS INC. (NYSE:SHS) Sauer-Danfoss' SGM2 and SGM3 aluminum fan drive gear motors now offer three new features: integrated reversing and proportional valves; a bi-directional motor for remote HIC reversing valves with shaft seal protector and cast iron cover; and outrigger bearing for...

Read More »
Sealed 12 Vdc Gearmotor develops 310 lb-in. torque at 2.5 rpm.
Gearmotors

Sealed 12 Vdc Gearmotor develops 310 lb-in. torque at 2.5 rpm.

Measuring 2.14 in. dia x 7.75 in. long with keyed output shaft of 12 mm dia x 25 mm long, Model MMP-TM55-60-12V GP52-308 accepts any 12 Vdc source, including battery power. Mounting is accomplished with 4 face mount M5 threaded holes, equally spaced on 40 mm dia B.C. Requiring 1.2 A at 12 Vdc to generate full load torque, reversible gearmotor features IP54 protection level for operation in harsh...

Read More »
Reversible DC Gearmotor develops 214 lb-in. torque @ 10.3 rpm.
Gearmotors

Reversible DC Gearmotor develops 214 lb-in. torque @ 10.3 rpm.

Accepting any 24 Vdc source, Model No. MMP-D22-376H-24V GP52-195 BR-005-IP54 measures 2.25 in. dia x 9.0 in. long and has 12 mm dia x 25 mm long keyed output shaft. Continuous and peak torque ratings are 214 and 443 lb-in., respectively, and totally enclosed integral failsafe brake is capable of 5 lb-in holding torque. Weighing 5 lb, IP54-rated unit requires 1.75 A @ 24 Vdc to generate full load...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers