DC Gearmotor accepts 12 Vdc and 5.7 A.
Measuring 54 mm in diameter x 168 mm long, planetary gearmotor Model MMP-SM21.12V/GPK-29:1 delivers up to 10 Nm of output torque at nearly 200 rpm of shaft output speed. It is suited for battery-powered applications and IP65 rated for harsh environments. Brushless, hall cell commutated version is also available.
Read More »DC Gearmotor accepts 12 Vdc and 5.7 A.
Measuring 54 mm in diameter x 168 mm long, planetary gearmotor Model MMP-SM21.12V/GPK-29:1 delivers up to 10 Nm of output torque at nearly 200 rpm of shaft output speed. It is suited for battery-powered applications and IP65 rated for harsh environments. Brushless, hall cell commutated version is also available.
Read More »Micro Gearmotors are battery-powered.
MMP-MGM Series DC Gearmotors, ranging in size from 12-42 mm dia, have compact, fully enclosed TENV design that employs 3, 6, 12, or 24 Vdc windings, depending on model. Suited for battery powered or other low voltage DC applications, products are available with spur or planetary gearing, ratios from 2:1 to 3000:1, and output torques to 4.5 Nm peak. Applications include robotics, portable...
Read More »Micro Gearmotors are battery-powered.
MMP-MGM Series DC Gearmotors, ranging in size from 12-42 mm dia, have compact, fully enclosed TENV design that employs 3, 6, 12, or 24 Vdc windings, depending on model. Suited for battery powered or other low voltage DC applications, products are available with spur or planetary gearing, ratios from 2:1 to 3000:1, and output torques to 4.5 Nm peak. Applications include robotics, portable...
Read More »
How to Select a Thermal Fluid Heater for Your Process
Do you know the important factors you should consider when comparing different types of thermal fluid heaters?
Read More »
Inverter Duty Gearmotors come in 2 shaft configurations.
Designed for use with adjustable speed controls, gearmotors utilize inverter spike resistant magnet wire for protection against voltage spikes and corona damage. Rated at 3/8 hp, 230 V, 60 Hz, 3-phase, products have operating range of 10-90 Hz and feature gear ratios from 5:1-75:1 for right angle and 5:1-30:1 for parallel shaft configurations. Right angel units feature internal oil expansion...
Read More »
Inverter Duty Gearmotors come in 2 shaft configurations.
Designed for use with adjustable speed controls, gearmotors utilize inverter spike resistant magnet wire for protection against voltage spikes and corona damage. Rated at 3/8 hp, 230 V, 60 Hz, 3-phase, products have operating range of 10-90 Hz and feature gear ratios from 5:1-75:1 for right angle and 5:1-30:1 for parallel shaft configurations. Right angel units feature internal oil expansion...
Read More »
DC Gearmotor features integral speed control.
Miniature, brushless, 12 V Model LB16-120-BB uses 120:1 spur geartrain to provide rated torque of 3.5 oz-in. at 100 rpm, and achieves continuous load range of 0-6.9 oz-in. Peak torque of 50 oz-in. at 0.8 A is available for starting and accelerating conditions. Input voltage varies from 3.5-13.2 Vdc for variable speed control operation. Measuring 0.63 in. OD x 1.31 in. long, motor weighs less than...
Read More »
DC Gearmotor features integral speed control.
Miniature, brushless, 12 V Model LB16-120-BB uses 120:1 spur geartrain to provide rated torque of 3.5 oz-in. at 100 rpm, and achieves continuous load range of 0-6.9 oz-in. Peak torque of 50 oz-in. at 0.8 A is available for starting and accelerating conditions. Input voltage varies from 3.5-13.2 Vdc for variable speed control operation. Measuring 0.63 in. OD x 1.31 in. long, motor weighs less than...
Read More »Right Angle Gear Motors run at 1,800 rpm.
Hollow Shaft Gear Motors can be base, end, side flange, shaft, or pilot mounted. Shaft options include -¾ in. hollow, along with double and single extension ¾, 5/8, and ½ in. diameter shafts with keys. Three AC motor options and 4 DC motor options span horsepower range from 1/8 to ¼ hp with gear ratios from 5:1-60:1. Gear motors are all ball bearing and synthetic oil lubricated.
Read More »Right Angle Gear Motors run at 1,800 rpm.
Hollow Shaft Gear Motors can be base, end, side flange, shaft, or pilot mounted. Shaft options include Ã-¾ in. hollow, along with double and single extension þ, 5/8, and ý in. diameter shafts with keys. Three AC motor options and 4 DC motor options span horsepower range from 1/8 to ü hp with gear ratios from 5:1-60:1. Gear motors are all ball bearing and synthetic oil...
Read More »
Dies & Stamping Services with Over 25 Years of Experience
PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.
Read More »
