Kurt Machining Utilizes Live Tool Speed Increaser, Realizes 9X Tool Cost Savings in Less Than a Year
Minnesota CNC shop uses Heimatec speed increaser to up RPM and feed rate; significantly reduces cycle time on aluminum engraving application Kurt Machining (Minneapolis, Minnesota) specializes in providing precision CNC machined parts, using state-of-the-art technologies and up to 5-axis machining. Since 1952, this 110,000 sq. ft. shop has provided its customers in a variety of high-quality...
Read More »Kurt Machining Utilizes Live Tool Speed Increaser, Realizes 9X Tool Cost Savings in Less Than a Year
Minnesota CNC shop uses Heimatec speed increaser to up RPM and feed rate; significantly reduces cycle time on aluminum engraving application Kurt Machining (Minneapolis, Minnesota) specializes in providing precision CNC machined parts, using state-of-the-art technologies and up to 5-axis machining. Since 1952, this 110,000 sq. ft. shop has provided its customers in a variety of high-quality...
Read More »New SPH Flange Planetary Gearbox Delivers an Improved Torsional Rigidity
Offered in three frame sizes and are rated for up to 450 Nm nominal and 675 Nm acceleration torque. Features single piece steel housing and ring gear that is machined directly inside. Provides a standard backlash rating of < 3 arc-min (single stage units) or < 1 arc-min reduced.
Read More »New SPH Flange Planetary Gearbox Delivers an Improved Torsional Rigidity
Offered in three frame sizes and are rated for up to 450 Nm nominal and 675 Nm acceleration torque. Features single piece steel housing and ring gear that is machined directly inside. Provides a standard backlash rating of < 3 arc-min (single stage units) or < 1 arc-min reduced.
Read More »Steel Wire Selection Guide for Various Applications
Download this eBook to learn about how steel wire products can be used for a variety of applications.
Read More »AutomationDirect Introduces 325 Frame Size IronHorse Cast Iron Worm Gearboxes Available In Ratios of 10:1, 15:1, 20:1, 30:1, 40:1 & 60:1
3.25” input to output shaft distance gearboxes with outputs in left hand shaft, right hand shaft, dual shaft and hollow shaft. Designed to change drive direction by 90 degrees, drive a load at a reduced fixed ratio of the motor speed and increase output torque by the same ratio. Gearbox C-face interface matches NEMA 56C, 145TC and 182/4TC motor frame sizes.
Read More »AutomationDirect Introduces 325 Frame Size IronHorse Cast Iron Worm Gearboxes Available In Ratios of 10:1, 15:1, 20:1, 30:1, 40:1 & 60:1
3.25” input to output shaft distance gearboxes with outputs in left hand shaft, right hand shaft, dual shaft and hollow shaft. Designed to change drive direction by 90 degrees, drive a load at a reduced fixed ratio of the motor speed and increase output torque by the same ratio. Gearbox C-face interface matches NEMA 56C, 145TC and 182/4TC motor frame sizes.
Read More »New 3-to-1 Speed Reducers from Rolling Motion Industries Utilize Traction Drive Technology
The 3-to-1 Speed Reducers consist of MAR-17-1-3.1 and the MAR-23-1-3.1 that uses an engineered traction fluid with coefficient of friction of 0.1 to 0.12. The MAR-17-1-3.1 unit is rated for input speeds up to 3600 rpm with 10 to 20 in/lbs of torque whereas the MAR-23-1-3.1 is rated for speeds up to 3600 rpm with an input of 20 to 30 in/lbs of torque. They are suitable for use in equipment such as...
Read More »New 3-to-1 Speed Reducers from Rolling Motion Industries Utilize Traction Drive Technology
The 3-to-1 Speed Reducers consist of MAR-17-1-3.1 and the MAR-23-1-3.1 that uses an engineered traction fluid with coefficient of friction of 0.1 to 0.12. The MAR-17-1-3.1 unit is rated for input speeds up to 3600 rpm with 10 to 20 in/lbs of torque whereas the MAR-23-1-3.1 is rated for speeds up to 3600 rpm with an input of 20 to 30 in/lbs of torque. They are suitable for use in equipment such as...
Read More »CRP Automotive Offers New AAE Steering Gear Boxes with Hard and Undersized Sector Shafts
The AAE Steering Gear Boxes are designed for Ford truck applications that include 968-1979 Ford F100-F350, 2005-2008 Ford F250 and F350, and 2008-2010 Ford F250 and F350. The gear boxes consist of case-hardened shafts and oversized bearings. The improved design of the boxes prevents premature failure caused by brittle and undersized sector shaft.
Read More »CRP Automotive Offers New AAE Steering Gear Boxes with Hard and Undersized Sector Shafts
The AAE Steering Gear Boxes are designed for Ford truck applications that include 968-1979 Ford F100-F350, 2005-2008 Ford F250 and F350, and 2008-2010 Ford F250 and F350. The gear boxes consist of case-hardened shafts and oversized bearings. The improved design of the boxes prevents premature failure caused by brittle and undersized sector shaft.
Read More »Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »