New Gearheads and Gearboxes Products

Speed Reducers offer optional pressure equalization system.

Available as an option on all Series 700 speed reducers, PosiVent(TM) keeps water, washdown solution, and other airborne contaminants out of gearboxes in food processing and material handling applications. In aggressive production environments, PosiVent system replaces traditional vent plugs that can allow contaminants to enter gearbox during cool-down. Built with single seam, system can be...

Gear Head provides over 30,000 hours of life.

EverTRUE continuous-duty, planetary gear head is available in 100, 140, and 180 mm sizes with ratios from 4:1 to 100:1. Lubricated for life, unit requires no maintenance or downtime. It runs at lower operating temperature compared to industry standard and has 4 arc-min of backlash. EverTRUE gear head is RediMount(TM) compliant, which provides error-free, 3-step mounting system.

Planetary Gearheads mount in one step to servomotor.

Available in 7 sizes, SP+ gearheads have output bearing design and utilize proprietary shaft seals that offer IP 65/66 protection. Dry-lubricated design contributes to units' 30,000 hr rated service life. Available in gear ratios from 3:1-100:1, including binary gear ratios, products run up to 4,500 rpm in continuous operation and feature noise levels down to 64 dB(A). They offer 17-750 Nm...

Miniature Gearhead offers 2 arc-min positional accuracy.

Measuring 32 mm square x 29 mm long, Model CSF-XHF Size 8 Gearhead features rated torque of 21 lb-in. and max torque of 80 lb-in. Flange output allows for compact axial length, and input of gearhead provides direct connection to any motor. Zero-backlash unit is available in gear ratios of 30, 50, and 100:1.

What You Need to Know About Adhesive N-95 Respirators

This white paper provides an in-depth overview of what you need to know about adhesive N-95 respirators.

DC Drive Package suits chemical metering pump applications.

Digital, closed-loop Series MD Drives are available with isolated 4-20 mA input/output modular option board. Package includes DC motor drive, 4-20 mA I/O, digital display, and relay outputs for pump running and fault alarms. Custom faceplate artwork is available.

Variable Speed Drive controls 2-4 pump systems.

Microprocessor-based Model PS 200 is programmed specifically for any centrifugal pump up to 700 hp. Accurate control of any process parameter is obtained by continous monitoring and reaction to pump conditions and system demands. Pump output is matched to exact flow and head required by process. Model PS 200 protects pump from upset conditions including dry running, low suction, cavitation, dead...

Gearhead provides 1.5 arc-min accuracy.

Available in Shaft- and Flange-output configurations, Series CSF-GH Quick Connect Gearhead mounts to any motor and maintains all benefits of harmonic drive gearing, including zero-backlash. Adapter flange and clamp-style shaft coupling allow assembly with servomotor. Cross roller bearing, used as output bearing, supports radial, axial, and moment loads. Unit has rated torque of 69 in.-lb, peak...

In-line Planetary Gear Box replaces spur gear boxes.

UPL series in-line planetary gear box features fixed input for ease in mounting to standard NEMA 23, 34, or 42 motors. Rated for 10,000 hrs, series offers ratios up to 100:1 and low backlash of less than 15 arc-min. Product is suited for applications where low-cost synchronous or stepper motors are used. UPL-H Linear Mount Series is also available.

Speed Reducers offer increased torque ratings.

Browning-® Torque Taper Plus Shaft-Mount Reducer Models 307 and 315 are offered in ratios of 5, 9, 15, 25, and 35:1. Reverse mount bushing system allows user to mount bushing from either side. Barrier seal system combines V-ring face seal, grease-filled labyrinth, and rotating outer flinger to defend against contamination and oil seal damage. Units are suited for package handling, aggregate...

Bevel Gear Drives suit heavy-duty industrial applications.

SK 92072 drives offer leak-free and maintenance-free operation for heavy-duty industrial applications. Construction elements include UNICASE(TM) one-piece housing, wear-free gearing designed to AGMA CLASS 13 standards, impact-resistant protective finish, and synthetic lubricating oil. Operating at up to 97% efficiency, products provide gear ratios from 3.85:1 to 54.65:1, output speeds from 32-455...

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.