Gearheads and Gearboxes

Drives suit low-speed, high-torque applications.
Gearheads and Gearboxes

Drives suit low-speed, high-torque applications.

Capable of producing output torques to 4,000,000 lb-in., Drive One High Torque Drives are offered in 6 sizes in parallel or right angle configurations. Drive arrangement options include base-mounted, coupling-connected; shaft-mounted, flange-connected; and shaft-mounted, hollow-shaft connected. Ratios are available from 145:1 to over 10,000,000:1, and standard accessory offerings include motor...

Read More »
Worm Gear Reducers withstand washdown applications.
Gearheads and Gearboxes

Worm Gear Reducers withstand washdown applications.

Washguard® All-Stainless Steel Worm Reducers are offered in sizes 818 and 821 with respective center distances of 1.75 and 2.06 in. Able to withstand extreme environments, products feature 300-Series die-cast stainless steel housing, input flange, and output cover; O-ring seal on face of input motor flange; and sealed for life design. Construction also includes 300-Series stainless steel...

Read More »
Transmissions

Marine Transmission has automatic gearbox design.

Dual-speed PRM Transmission, StepDrive, is suited for boats equipped with Volvo Penta Duoprop 290 drive legs and is installed entirely within center section of Duoprop unit. Change from low to high gear occurs automatically at pre-determined engine speed, optimized to individual boat and engine combination. During deceleration, low ratio is engaged as engine speed falls below 1,500 rpm. Smooth...

Read More »
Winch Drives feature planetary design.
Hydraulic Motors

Winch Drives feature planetary design.

Suited for 3-12 ton applications, Series PWD 2100 offers hydraulic version that allows for direct fitting of cartridge axial piston motors, and universal input version that offers external 5 in. diameter brakes with associated backstop device. For line pulls in excess of 12 tons, Series SLW-SCW is based on S Series gearboxes with epicyclic gear design. Both series feature double sealing and...

Read More »
Speed Reducers feature washdown coating.
Coatings

Speed Reducers feature washdown coating.

Suited for speed reducers, Stainless Bost-Kleen(TM) utilizes Bisphenol-F type epoxy, which offers chemical, pressure, and thermal resistance to prevent wear and cracking caused by caustic chemicals and high-pressure washdowns as well as scratches that may occur from contact during installation and operation. Coating is USDA and FDA accepted, BISCC certified, and available on all speed reducers.

Read More »
Servo Reducers provide precise positioning.
Gearheads and Gearboxes

Servo Reducers provide precise positioning.

Developed for use with servo motors, Servo-Worm Reducers feature angular backlash of less than 2 arc-min, with lower backlash levels optional. Units come in 5 sizes with 50-125 mm center distance, input speeds up to 5,000 rpm, and reduction ratios from 4.75 to 52:1. Wide range of motor couplings and mounting flanges are available for assembly to virtually all servo motors. Hollow bore output can...

Read More »
Gearheads and Gearboxes

Servo Reducers are suited for precision applications.

With less than 6 arc-min angular backlash at output shaft, E-Servo Worm Reducers are available in 4 sizes with 32-80 mm center distance, input speeds to 5,000 rpm, and reduction ratios from 4.75-52:1. Various motor couplings and mounting flanges are available, and hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements. Applications include rotary axis...

Read More »
Gearheads and Gearboxes

Integrated Racks mount directly to linear guide rails.

Eliminating need for additional machining and alignment, Integrated Racks can be assembled to rail off of machine frame. By mounting rack and rail together, need for separate mounting surface for rail is eliminated. Drives are suited for applications such as axis drives requiring precise positioning and repeatability, traveling gantries and columns, pick and place robots, and material handling...

Read More »
Gearbox delivers smooth operation in harsh environments.
Gearheads and Gearboxes

Gearbox delivers smooth operation in harsh environments.

Corrosion-resistant Slide-Rite(TM) CR features one-piece hard anodized aluminum case that seals gears from outside contaminants. Available in standard and compact versions, each incorporates two 45° helical gears that mesh at right angles. Gearbox includes corrosion-resistant, electroless nickel-plated geared sleeves, keys, and retaining rings in addition to stainless steel bearings for...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics