Gearheads and Gearboxes

Spur Gears

8mm Precision Zero-Backlash Spur Gearhead

Clearwater, Florida (February 1, 2007) - MicroMo Electronics, Inc. announces the addition of a metal spur zero backlash gearhead with the release of the Series 08/3. The zero backlash spur gearhead is ideal for applications requiring precision positioning with high resolution and low torque requirements. The gearhead weighs a mere 4.5 to 5.7 grams while providing a maximum continuous torque of 15...

Read More »
Servo Planetary Gearhead suits precision applications.
Gearheads and Gearboxes

Servo Planetary Gearhead suits precision applications.

Suited as component of servo and stepper motor applications, alphira-® low-backlash planetary gearhead is offered in 4 sizes and 5 reduction ratios. Maintenance-free product is housed in unvarnished aluminum case and exhibits greater than 95% efficiency. Designed for cyclic and continuous operation, gearhead has 20,000 hr service life and is built with lifelong lubrication and sealing.

Read More »
Gearheads and Gearboxes

Gearbox provides backlash-free positioning.

Combinining trochoidal gear reduction system with heavy-duty axial/radial bearings, TwinSpin-® provides single unit bearing reducer with reduction ratios from 33:1 to 191:1. Unit delivers acceleration and braking torque ratings over 7,000 Nm and up to 5 times overload torque under emergency stop conditions. Featuring sealed housing, gearbox comes in variety of frame sizes with face or flange...

Read More »
Gearheads and Gearboxes

Parker Bayside PV Series Gearhead Combines Power and Versatility

CHICAGO, OCT. 29, 2006 - Parker's Electromechanical Automation Division is pleased to announce the release of the PV Series gearbox. Developed by Parker Bayside, the PV Series combines power and versatility by offering a wide assortment of output face options along with high radial load and output torque performance. The output face options offer choices that have the same output face dimensions...

Read More »
HVAC Drives offer power ratings up to 350 hp.
AC Motor Controllers and Drives

HVAC Drives offer power ratings up to 350 hp.

Suited for commercial fan and pump applications, PowerFlex 400 Drives feature integral RS485 communications interface that supports standard building automation networks, including Modbus RTU, N2, and Siemens P1-FLN. Embedded PID controller adjusts output frequency to maintain process variable, while 3 programmable skip frequencies and bands prevent drive from running continuously at resonant...

Read More »
Speed Reducer has heavy-duty design.
Gearheads and Gearboxes

Speed Reducer has heavy-duty design.

Case carburized helical/bevel speed reducer, DODGE-® Motorized TORQUE-ARM II(TM), features AGMA-rated gearing design with heavy-duty bearings, HNBR oil seals, and Reliance Electric(TM) motor and drive options. Offered in 2 sizes with horsepower ratings from 1-15 hp and output speeds from 5-140 rpm, product is available as right-angle shaft mounted integral gearmotor or right-angel shaft mounted...

Read More »
Thermoplastic Gear Operator withstands severe chemicals.
Manual Rotary Actuators

Thermoplastic Gear Operator withstands severe chemicals.

Constructed of composite plastic with black urethane coating, Plasgear will not corrode or rust from exposure to harsh chemicals. Submersible unit features visible PP position indicator, NAMUR mounting dimension that allows for mounting accessories, plastic PPG reinforced hand wheel, and adjustable travel stop for open and close position. Available in sizes from 1-½-14 in., Plasgear is standard...

Read More »
Gearheads fit various information transducing devices.
Gearheads and Gearboxes

Gearheads fit various information transducing devices.

Designed to align and fit Bu-Ord size 11 devices, models S9111A-T640 (SB), T641 (AB), and T642 (ZB Series) gearheads are available in 3 degrees of anti-backlash precision with 16 different gear ratios ranging from 2:1-36:1. Input shaft is located at front of gearhead, and geartrain design utilizes passivated SS 416 gears and shafts conforming to ASTM 582 and QQ-P-35 standards. Gearheads have...

Read More »
Gearheads and Gearboxes

Iveco Motors of North America Displays Their Series of Diesel Gen-Drives for Power Generation Applications

At Power-Gen International, November 28-30, 2006, Orlando, FL, Booth #2246 ORLANDO, FL (November 28-30, 2006)- IVECO MOTORS of North America, Inc., a Fiat Powertrain Technologies (FPT) brand, proudly displays their NEF, Cursor and Vector Gen-Drives at Power-Gen International, Orlando, FL, at the Orange County Convention Center, November 28-30, 2006, booth #2246. The current product range of IVECO...

Read More »
Gearheads and Gearboxes

Ratio Drives feature non-corrosive, all-metal construction.

New Hyde Park, New York - A new series of six right angle ratio drives manufactured by Stock Drive Products feature non-corrosive all metal construction for use in a wide variety of instrumentation applications. A total of 6 worm and bevel gear types are stocked. The 3 worm gear types are offered as standard with 5:1, 10:1 and 20:1 ratios. The worm gears are made of bronze and the worm is steel....

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics