Gearheads and Gearboxes

IronHorse(TM) Worm Gearboxes now Available from AutomationDirect®
Worm Gears (Gears, Worms and Sets)

IronHorse(TM) Worm Gearboxes now Available from AutomationDirect®

Cumming, GA --- June 18, 2008 --- AutomationDirect has expanded its mechanical power transmission product line to include worm gearboxes in four frame sizes, and six gear ratios from 5:1 to 60:1. Constructed of cast iron one-piece housings, the worm gearboxes feature a C-flange input and carbon steel shaft with either right-hand or dual shaft output. Manufactured by one of the world's leading...

Read More »
Gearheads and Gearboxes

Bevel Gearboxes offer gear ratios of 1:1 or 1:2.

Available in single and double shaft models, KBX Series Gearboxes can be installed in any direction or orientation. Low-noise units feature aluminum alloy housing and spiral bevel gears in hardened alloy steel case. High-grade grease is sealed into units before shipping so they are maintenance-free. Selective speed ratios with gear ratios of 1:1 or 1:2 make them suitable for most applications.

Read More »
Gearheads and Gearboxes

DEPRAG Develops Innovative Drive System That Corresponds with ATEX Standards

Explosion prevention is a hot issue within the field of systems engineering. Friction, overheating or sparks could lead to a horror show in potentially explosive environments. DEPRAG, one of the leaders in the field of air motors, has mastered this challenge with an innovative drive system. DEPRAG engineers have developed an entire system made out of stainless steel, consisting of motor, brake...

Read More »
Miscellaneous Controls

BorgWarner's Next Generation Torque Management Technology Featured in Kia Mohave

Date: 3/4/2008 10:15:00 AM ITM® Transfer Case Provides Increased Torque Capacity in a Smaller, Cost-Effective Package AUBURN HILLS, Mich., March 4 / -- BorgWarner introduces the second application of its next generation torque management technology as optional equipment on the new 2008 Kia Mohave, recently launched in Korea. BorgWarner's new technology features an electronic control unit...

Read More »
Gearheads and Gearboxes

Reducer is designed for high-torque applications.

Designed to meet or exceed AGMA and international standards, Dodge MagnaGear XTR is available with parallel shaft or right-angle configurations and torque capacities to 920,000 lb-in. Modular design allows for multiple mounting configurations and can be used with various soft start mechanisms. Constructed of heavy-duty cast iron, product features carburized, hardened, and precision ground...

Read More »
Saw Blades

Anti-Vibration Tools Are Show-Stoppers Introduced by Craftsman® at the 2008 International Builders Show

ORLANDO, Fla., Feb. 14 -- International Builders Show -- Anti-vibration tools are sure to be the show-stoppers at Craftsman's 2008 International Builders Show booth. The Craftsman brand continues to develop innovations and technologies to advance products, using customer feedback and opinions as a guide. Here is a sneak peak of the new, powerful Craftsman tools and hardware that are currently...

Read More »
Gearheads and Gearboxes

Worm Gear Speed Reducer suits food and beverage industry.

Offering maximum corrosion resistance in caustic wash down environments, Stainless Steel 700 Series Worm Gear Speed Reducer comes with housings, motor flange, and carrier crafted from 316SS. Rounded housing design, plastic hardware covers, and 2-piece mounting base prevent particle accumulation or fluid pooling on or under unit. Large internal oil reservoir is filled with H1 food-grade lubricant...

Read More »
Bevel Gear Drives optimize pallet truck design.
Motor Controllers and Drives

Bevel Gear Drives optimize pallet truck design.

Featuring modular design, wide-wheel TDB254WR Series enables swing radius of 7 in. with zero offset drive for pallet, reach, narrow aisle, and stand-up trucks as well as AGVs, sweepers, and scrubbers. Gear ratios from 14:1 to 39:1 enable OEMs to achieve optimal speed and motor efficiencies for each vehicle type. OEMs can choose between range of UL-approved ac induction motors up to 5.2 hp/4.0 kW...

Read More »
Gearheads and Gearboxes

Right Angle Servo Gearheads offer various mounting options.

Ranging in size from 1.500-3.500 in. centers, Model RG and Series W have double enveloping worm gearing with backlash as low as true zero. Series W offers Direct Mount, which consists of tapped holes on end of hollow shaft. Direct Mount enables mounting of components directly to hollow output without concern for keyed connection. To facilitate shaft mounting, Model RG is available with base mount...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics