Gear Pumps

Gear Pumps

External Gear Pumps suit high pressure applications.

Rated to 190 gpm, SG Series is available with sealless Viking Mag Drive®, single or double cartridge seals, component mechanical seals, or lip seals. Units offer 29 displacements with pressures to 500 psi standard. All models operate at up to 4-pole motor speeds, and offer either foot bracket or close-coupled motor mount to both NEMA C and IEC frame motors. Made of cast and ductile iron,...

Read More »
Gear Pumps

Magnetic Drive Gear Pump fits in tight spaces.

Featuring ability to handle fluids up to maximum temperature of 203°F, Model DGM09 DC Magnetic Drive Gear Pump is 24 Vdc, 3,000 rpm device that handles flow rates to 140 Lph. Pump housings and gears are made of Vectra, and pump is designed to handle clean water and viscous fluids at low pressure. Suction/discharge ports are 8 mm barbed end and seals are available in NBR, EPDM, or...

Read More »
Gear Pumps

Gear Units offer over 5,000 pump and 500 motor variants.

Suited for assembly of compact power packs, B Series pumps feature 7 cc per revolution, while G Series pumps have displacement of up to 63 cc per revolution for applications in upper power classes. U and T Series pumps offer low noise emissions and vibrations, and satisfy demands for all displacements between 4 and 63 cc per revolution. Individual/combined multiple external gear pumps are suited...

Read More »
Gear Pump delivers pulse-free flow.
Gear Pumps

Gear Pump delivers pulse-free flow.

Able to produce smooth flow for even coating, NPC Series provides predictable fluid delivery via metering precision without fluid slippage. Pump can be cleaned and returned to running status within minutes, and any part that wears can be replaced individually. Modularity enables scalable operation, and 2 available body sizes offers capacities of either .5, 1, and 3 cc/revolution or 5, 10, and 15...

Read More »
Gear Pumps

Award-Winning SureFire Lubricator Now Available with On-Board Programmable Controller

CHICAGO (September, 2006) - Bijur Delimon International, a global leader in automated lubrication systems for manufacturing equipment, has announced the release of the SureFire automatic lubricator with an on-board programmable controller. The controller is available on all single-phase motor units, and with any of the available reservoir sizes. The electronic controller features an LED display...

Read More »
Gear Pumps

Gear Pumps are offered in aluminum or cast iron versions.

Offered in two series, A-frame Global Gear Pumps (GGPs) feature 12-tooth gear design that exhibits minimal noise and low-pressure ripple. Products operate at 4,000 psi and are available with SAE, DIN, and ISO flanges, shafts, and ports. While AEG Aluminum Series has floating bushing, pressure-balanced design with extruded aluminum body and cast iron end cap and mounting flange, AEK Cast Iron...

Read More »
Micro Gear Pumps provide precise, pulseless flow.
Gear Pumps

Micro Gear Pumps provide precise, pulseless flow.

Offered in Low Pressure (Series ML) and High Performance (Series MH) configurations, micro annular gear pumps offer precise flow rate control to help conserve liquids and increase system efficiency. Gear tooth forming technology minimizes pulsations, and rotors provide tight flow rate control at differential pressures up to 1,160 psi. This allows pumps to dispense volumes as small as 0.25...

Read More »
Gear Pumps

Gear Pump facilitates oil changes on large diesels.

For industrial engine use, AC Metering Gear Pump can control speed, reverse flow, and move variety of fluids including motor oil, gear oil, and heavy viscous liquids. Unit combines reversible gear pump with ac driver and can regulate flow rate from 0.5-8.5 gpm. It features brass body, bronze gears, and stainless steel shaft to resist corrosion. Self-ventilating motor is IP54 insulated and...

Read More »
Gear Pumps

Positive Displacement Pumps handle aggessive applications.

Universal Design PD Pump Series includes stainless steel models in 10, 15, and 20 gpm configurations. Utilizing gear within gear pumping principle, units have 2 moving parts; stainless steel outer gear and plastic inner gear engineered to match application. Self-priming pumps feature inlet capacity of 20 in. Hg to 250 psi and viscosity range from 32-10,000 SSU. All units accept relief valves, lip...

Read More »
Self-Priming Pumps are suited for terminals and tank farms.
Gear Pumps

Self-Priming Pumps are suited for terminals and tank farms.

Able to operate in either direction, pumps with suction lift capability can be mounted above liquid level in barges and tankers for loading/unloading or line stripping. For terminal operations, Internal Gear and Industrial Lobe pumps offer thrust control and adjustable rotor clearances. Gear pumps handle viscosities from 28-2,000,000 SSU with capacities up to 1,500 gpm. Lobe pumps, in bi-wing or...

Read More »

All Topics