Gaskets

Gaskets are highly conductive and provide EMI shielding.
Gaskets

Gaskets are highly conductive and provide EMI shielding.

Soft GORE-SHIELD® GS8000 EMI gaskets consist of nickel-plated base polymer, backed with thin foil layer and electrically conductive, pressure-sensitive adhesive. Less than 3.4 N/cm of pressure compresses gaskets from nominal starting thickness of 1 mm to thickness of 0.4 mm. At this point, DC resistance is less than 10 mOhm for a 19 mmÂ-² donut, and shielding effectiveness is greater...

Read More »
Gap Filler Materials reduce stress on solder joints.
Adhesives

Gap Filler Materials reduce stress on solder joints.

Form-in-place, fully cured, thermally conductive THERM-A-GAP® T630 and T630G provide conformable thermal path between hot components and heat spreaders. Dispensable T630 and T630G viscoelastic pastes achieve 50% deflection at 1 psi. T630G material contains added filler of 0.010 in. dia glass beads. Both gap fillers provide thermal conductivity of 0.7 W/m-K and are capable of filling gaps...

Read More »
Safe Seal Materials protect drinking water systems.
Miscellaneous Compounds

Safe Seal Materials protect drinking water systems.

Sealing materials meet NSF Standard 61 protecting potable water from contaminants that leach or migrate into water from traditional components. Organic materials include 10 EPDM compounds, 7 thermoplastic elastomers, and 2 nitrile compounds that can be formed into faucet and shower gaskets, water filter gaskets, valve seals and seats, pipe coupling seals, and diaphragms and O-rings used in pumps,...

Read More »
EMI Gaskets shield CompactPCI enclosures.
Gaskets

EMI Gaskets shield CompactPCI enclosures.

Metal spring finger gaskets provide EMI shielding of faceplate interfaces on high frequency CompactPCI industrial computing and communications systems. Gaskets meet IEEE 1101.10 EMC Front Panel reference design. They are provided in two profiles: one is available in both beryllium copper and stainless steel, and other is produced exclusively in stainless steel. Gaskets are available in standard...

Read More »
Understanding Water Hammer
Sponsored

Understanding Water Hammer

DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.

Read More »
Flange Gaskets seal under low pressures.
Gaskets

Flange Gaskets seal under low pressures.

TriGuard(TM) gaskets provide positive sealing in fluid piping on fragile flanges or flanges with irregularities, where bolt torque and gasket compression stress must be limited. Expanded PTFE material combines sealing characteristics of elastomers with temperature and chemical resistance of PTFE. Gas-tight sealing can be achieved at 250 psi. They are available in 1/2 to 28 in. ANSI ring and full...

Read More »
Gaskets

Gasketing Material cures in place.

Non-toxic, polyether-foam, gasketing material is formulated for automotive interior and exterior Buzz, Squeak & Rattle (BSR) applications. Isosyanate-free, 2-component, black, rubber foam adheres to hard-coated acrylic polycarbonate, and resists heat up to 120°C. Near frictionless cured bead surface allows mating parts to be slid into place with minimum adjustment force. Material cures in...

Read More »
Gasketing/Sealing Material comes in various ratings.
Adhesive Tapes

Gasketing/Sealing Material comes in various ratings.

Gasketing and Sealing Line includes UL listed clip-on compression gaskets made of EPDM with NEMA 4 sealing and UV resistance; UL 94 flame retardant clip-on compression profiles with NEMA 4 sealing capability; and EMC conductive coated clip-on EPDM gasket profiles. UL 94 flame retardant neoprene closed-cell sealing tape is available with adhesive backing and internal cross-threading for...

Read More »
EMI-Shielding Gasket holds up in severe environments.
Gaskets

EMI-Shielding Gasket holds up in severe environments.

Form-in-place Cho-Form® 5541 is galvanic-corrosion resistant and provides electrical stability in environments such as urban gas, salt fog, and high temperatures, as well as in high temperature/high humidity cycling. Single-component, electrically conductive, silicone elastomer contains nickel-plated graphite particles. Gasket material provides shielding effectiveness above 70 dB, from 200...

Read More »

All Topics