Gaskets

Fasteners

Lockbolt Fastening System has high vibration resistance.

Comprised of Huck's BOBTAIL lockbolt and lightweight installation tooling, BOBTAIL® lockbolt fastening system provides optimal vibration resistance and fatigue strength. Utilizing swaging process, unit's collar is pressed onto hardened threads of lockbolt and is forced into grooves of pin-forming permanent, vibration-proof connection. System is available in Grades 2, 5, and 8 and comes in...

Read More »
Federal-Mogul's Proprietary Liquid Elastomer Molding (LEM)(TM) Technology Offers Innovative Solution in Fuel Cell Development
Fuel Cells

Federal-Mogul's Proprietary Liquid Elastomer Molding (LEM)(TM) Technology Offers Innovative Solution in Fuel Cell Development

SOUTHFIELD, Mich., July 1 -- Federal-Mogul Corporation (NASDAQ:FDML), a leading global supplier of powertrain, chassis and safety technologies, has developed an innovative gasket technology to assist in fuel cell development for energy-efficient vehicles. Federal-Mogul's patented Liquid Elastomer Molding (LEM(TM)) gaskets are constructed with small engineered elastomeric beads molded onto thin...

Read More »
Sealing Gasket is designed for D-shaped chassis connectors.
Gaskets

Sealing Gasket is designed for D-shaped chassis connectors.

Providing dust and water resistant assembly for D-Shaped chassis connectors, SCDP gasket is designed for use with opticalCON DUO and QUAD fiber connectors and/or any Neutrik product using standard D-style cutout, including water resistant USB/FireWire and HDMI feedthroughs. Gasket is available in 6 different colors including black (SCDP-0), red (SCDP-2), yellow (SCDP-4), green (SCDP-5), blue...

Read More »
Sealing Gasket is available in sizes ranging from 1-8 in.
Gaskets

Sealing Gasket is available in sizes ranging from 1-8 in.

Designed for low-temperature performance applications, patent pending Flush Gap(TM) gasket features triple sealing ribs on each gasket seal face. It contains center rib which fits flush over gap between pipe ends and closes off gasket cavity, allowing for reduction of buildup of moisture and ice which can cause leakage under freezing conditions. When combined with Gruvlok Xtreme(TM) lubricant,...

Read More »
Gaskets

Garlock Garners EPA Clean Air Award

Palmyra, N.Y., May 19, 2009 - Garlock Sealing Technologies has received the U.S Environmental Protection Agency's 2008 Clean Air Excellence Award for using a more environmentally friendly solvent in the production of its industrial gasketing. "From the over 120 applications received, Garlock's project was chosen by the EPA's Office of Air and Radiation for its impact, innovation, and...

Read More »
Fittings

Garlock Gaskets Help Boost Pressure Capability of New Corzan® CPVC Flange Kits

Palmyra, N.Y., February 16, 2009 - Stress Saver® XP gaskets from Garlock Sealing Technologies allow pump, valve and other connections made with The Lubrizol Corporation's new Corzan® High-Pressure Flange Kit to withstand the same pressure as the Corzan CPVC piping systems in which they are installed. As a result, these flanged joints are no longer limited to the 150 psi rating of...

Read More »
Trim

New Automotive Gasket Technology

Newmarket, Ontario - Elasto Proxy Inc. is pleased to announce the fabrication of film spliced automotive style trim seal gaskets. When required to cut lengths of trim seal and manually bond gaskets using quick set adhesives, the opportunity for miscalculation and human error is presented, which can result in wasted time and product. Now that trim seal can be cut, bonded by film splice and shipped...

Read More »
Gaskets

Form-In-Place Gaskets promote productivity, reliability.

Featuring heat and humidity resistance as well as compression set characteristics that lend to reliability and longevity, EMI SENTRY(TM) products consist of 4 silicone-based pastes for dispensing onto substrate. Room temperature-cure products include SNK55-RXP (silicone with silver/copper) and SNL60-RXP (silicone with silver/aluminum), while oven-cure products include SNK60-HXP (silicone with...

Read More »
Miscellaneous Guides

Federal-Mogul Corporation Supplies Components for Nine of Ward's '10 Best Engines' for 2009

SOUTHFIELD, Mich., Jan. 14 -- Federal-Mogul Corporation (NASDAQ:FDML) is proud to supply components or systems for nine of Ward's 10 Best Engines" for 2009 model year vehicles. Federal-Mogul has designed and manufactured parts for 50 of the 70 engines recognized as the "10 Best" by Ward's in the past seven years. Federal-Mogul provides a wide range of power-cylinder, sealing and heat insulation...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics