Gaskets

Bronze Meter Flange Kits from Matco-Norca
Gaskets

Bronze Meter Flange Kits from Matco-Norca

Brewster, NY, July 26, 2010 - For securing water meters into domestic potable water lines, Matco-Norca offers its 431 Bronze Oval Meter Flange Kits in 1 Â-½ and 2" IPS sizes. These kits contain two bronze oval flanges, two drop-in style neoprene gaskets (full face red rubber gaskets are available by request), four zinc plated grade 8 bolts and four zinc plated grade 8 nuts. Flanges conform...

Read More »
Replacement Gasket works with quick-release dust cups.
Gaskets

Replacement Gasket works with quick-release dust cups.

Not prone to wear and tear, P618619 snaps onto quick-release dust cups to replace sponge gasket that deteriorates and may become dislodged in service. Product withstood in-situ testing on drill rig at open cut coal mine, where it was subject to 1,500 hr of service and countless opening and closing of trapdoor. It did not exhibit any shrinkage and maintained durometer (hardness) and position...

Read More »
Gaskets

Fabric-Over-Foam Gaskets meet any EMI shielding application.

Manufactured from open cell urethane foam core and wrapped with copper-nickel plated conductive fabric, Hi-Flex(TM) metalized gaskets are self-terminating when cut and suitable for shielding seams, doors, and access panels. Variety of profiles is available, including rectangles, squares, D-shapes, bell shapes, knife shapes, and P-shapes.

Read More »
Matco-Norca Stocks Fully Compliant Bolt & Gasket Sets
Gaskets

Matco-Norca Stocks Fully Compliant Bolt & Gasket Sets

Brewster, NY - Matco-Norca offers Bolt & Gasket Sets with both non-asbestos and red rubber gaskets. These gaskets are available in both full face and ring style sets. Matco-Norca's non-asbestos gasket (APG style CAN-750) is constructed of aramid and other synthetic fibers and bonded with nitrile rubber. Non-asbestos gaskets meet ASTM F152 and are suitable for use with water, air and a variety of...

Read More »
EMI Shielding Gaskets survive harsh environments.
Gaskets

EMI Shielding Gaskets survive harsh environments.

Developed for aerospace, automotive, and telecommunication applications, CHO-SEAL 6502 and 6503 are nickel-plated aluminum particle (Ni/Al) filled silicone and fluorosilicone elastomers that retain shielding effectiveness after exposure to high/low humidity and temperature cycles as well as salt/fog environments. They are available in molded and extruded product forms as well as silicone,...

Read More »
U.S. Made Gumlast(TM) L8010 Successfully Benchmarked Against Kalrez® 6375
Hydraulic / Pneumatic / Radial Shaft Seals

U.S. Made Gumlast(TM) L8010 Successfully Benchmarked Against Kalrez® 6375

ROHNERT PARK, California (September 08, 2009) - Nugeneration Technologies (NuGenTec) announced today that its Gumlast(TM) L8010 has been successfully benchmarked against Kalrez® 6375 at Chevron Richmond refinery. Gumlast(TM) L8010 is 100% pure FFKM and is manufactured in the U.S.A. Utilizing the latest cross-linking and reinforcement techniques, multiple grades have been formulated to optimize...

Read More »
L.J. Star Standardizes on Gylon®Gaskets for Sight Glasses and Sight Flow Indicators
Gaskets

L.J. Star Standardizes on Gylon®Gaskets for Sight Glasses and Sight Flow Indicators

In an effort to continuously improve its products, L.J. Star is implementing a new standard gasket material for all L.J. Star sight flow indicator and sight glass assemblies. The gasket material, Garlock Gylon 3504 and BIO-LOK(TM)(hygienic type), allows for higher temperature capability, improved performance within chemical environments, faster delivery times on sightflow indicators and sight...

Read More »
Shielding

EMI / RFI Shielding Clip-On Product - MINIATURE CLIP-ON SERIES

Omega Shielding has an innovative EMI / RFI Shielding Clip-On Product - MINIATURE CLIP-ON SERIES. OMEGA SHIELDING PRODUCTS' Miniature Clip-on Series of parts are among the smallest clip-on strips, of this configuration, available today. They require very low compression force and exhibit virtually no compression set. The 99-800 and 99-801 series have straight fingers which, when compressed,...

Read More »
Shielding

EMI / RFI Shielding Clip-On Product - P/N: 099-850-04-20, 099-850-06-20 & 099-850-08-20

Omega Shielding has an innovative EMI / RFI Shielding Clip-On Product - P/N: 099-850-04-20, 099-850-06-20 & 099-850-08-20. For clip-on applications that require a low force, low profile, no-snag shielding gasket, this series of parts is ideal. In order to achieve low compression forces with good resiliency, these parts are made from a thin gage (0.003 ) copper alloy with a shape designed to give...

Read More »
Shielding

EMI / RFI Shielding Clip-On Product - Series P//N:: 099--903--00--20, 099--904--00--20 & 099--906--00--20

Omega Shielding has an innovative EMI / RFI Shielding Clip-On Product - Series P//N:: 099--903--00--20, 099--904--00--20 & 099--906--00--20. No adhesives, no rivets, no screws, no solder or welds. This series is designed for simple snap-in installation and multi-directional deflection. A variety of sizes exist to accommodate most applications. The parts are easily installed by first inserting one...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers