Gas / Chemical Analyzers

Gas / Chemical Analyzers

SnapUI and Windows CE Power New Generation of Intrinsically Safe Gas Analysers from Geotech

ByteSnap Design's software and hardware is the first to bring Windows CE to gas analysers approved for Zone 0 environments where flammable gasses are highly likely to be present. Birmingham, UK, - ByteSnap Design Ltd, a specialist in embedded systems design and development, and Geotech have announced an industry first for commercially available, intrinsically safe electronic devices. The new 5000...

Read More »
Fail-Safe Monitor indicates diesel engine block heater health.
Gas / Chemical Analyzers

Fail-Safe Monitor indicates diesel engine block heater health.

Able to eliminate or reduce cold weather starting problems for commercial vehicles or fleets with diesel engines, Power-Block(TM) monitors truck/bus block heaters during cold weather months to prevent freeze ups. Electronic device immediately tells operator AC voltage coming out of cord, heater efficiency, and if block heater is functioning properly. Built to NEMA 4 standards, device is designed...

Read More »
Gas / Chemical Analyzers

FTIR Analyzer targets large dairy processors.

Suited for cow, goat, sheep, and buffalo milk, CombiScope(TM) FTIR 600 comprises LactoScope(TM) FTIR 600, for measuring chemical composition, and SomaScope(TM) LFC 600, for counting somatic cells in raw milk, both at speeds of 600 samples/hr. Electro-magnetic sampling system, operating without friction and wear, uses IR and acoustic sensors to monitor sample temperature, condition, and volume...

Read More »
Fracking Kit tests contaminates in drinking water.
Gas / Chemical Analyzers

Fracking Kit tests contaminates in drinking water.

Comprising LabNavigator, pH sensor, turbidity sensor, and conductivity sensor, Fracking Kit measures increased concentrations of barium, chloride, nickel, sulfate, bromide, and potassium ions, as well as turbidity and changes in acidity. System works by connecting 1 or more sensors to LabNavigator, ensuring accuracy by using included non-toxic standard, dipping sensor into sample of well water,...

Read More »
Portable Infrared Analyzers Provide On-Site Measurement of Oil and Grease Levels in Hydraulic Fracturing Water
Gas / Chemical Analyzers

Portable Infrared Analyzers Provide On-Site Measurement of Oil and Grease Levels in Hydraulic Fracturing Water

East Norwalk, CT - The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off-site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote laboratory results to determine the oil level can take...

Read More »
Gas / Chemical Analyzers

GHG Analyzer enables in-situ measurements anywhere.

Consuming less than 70 W, UGGA Ultra-portable Greenhouse Gas Analyzer simultaneously measures CO2, CH4, and H2O concentrations without cross sensitivity with other gases. Unit automatically corrects CO2 and CH4 for all water vapor dilution and spectroscopic effects and reports both species as dry mole fractions, eliminating need for sample drying. Internal computer can store data on internal disk...

Read More »
Non-Invasive Analyzer examines O2 in pharmaceutical blisters.
Gas / Chemical Analyzers

Non-Invasive Analyzer examines O2 in pharmaceutical blisters.

With optical sensor that gives off light directly related to amount of oxygen present, OpTech® - O2 system enables non-invasive, non-destructive thermoformed blister package testing. System complies with ASTM F2714, is stable in ambient light, and can determine oxygen headspace, dissolved oxygen, ingress, and permeation rate in flexible and rigid packaging under real-life conditions. Values...

Read More »
On-Site TPH in Soil Measurements in less than 10-15 Minutes with Portable Infrared Analyzers
Gas / Chemical Analyzers

On-Site TPH in Soil Measurements in less than 10-15 Minutes with Portable Infrared Analyzers

East Norwalk, CT - On-site analysis of total petroleum hydrocarbon (TPH) concentration levels in soil are easily handled using the InfraCal TOG/TPH Analyzers manufactured by Wilks Enterprise, Inc. The InfraCal TOG/TPH Analyzers are portable infrared (IR) analyzers that quickly determine TPH levels in less than 10-15 minutes, including the extraction. Concentrations as low as 10 ppm to well over...

Read More »
Crude Oil Analyzer incorporates chemiluminescence detectors.
Gas / Chemical Analyzers

Crude Oil Analyzer incorporates chemiluminescence detectors.

Built around recognized simulated distillation methods, AC Analytical Controls CNS SIMDIS for Crude Oil simultaneously determines boiling range distribution of carbon, nitrogen, and sulfur in crudes and final products. System is comparable to methods such as ASTM D2887, D6352, D7500, and D7169 standards, but minimizes time to complete crude assays. In addition to providing extensive reporting...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers