Flexure-Based Galvanometer is suited for laser applications.
Able to be used in small angle applications, HarmonicÂ- Scan-15 (HS-15) moving-magnet galvo scanner uses galvanometer mirrors with 7, 10, and 15 mm apertures and can achieve scan rates of 900 Hz at small angles (1°), 500 Hz at medium angles (10°), or 100 Hz at large angles (30°). Capacitive position sensing offers smooth scanning and extended service life in...
Read More »
Electrochemical Instrument test energy storage devices.
Interface 5000 Potentiostat/Galvanostat/ZRA (Zero-Resistance Ammeter) is designed forÂ- those performing cell-level testing of batteries, fuel cells, and other energy storage devices. Electrically isolated from ground, electrochemical instrument comes in 2 models: 5000P and 5000E. Floating potentiostat can make measurements on earth-grounded electrodes or multiple working electrodes...
Read More »Company to Showcase Latest Laser Technology Nutfield to Attend CMTS
Hudson NH – Nutfield Technology (www.nutfieldtech.com) announced that it will be attending the Canadian Manufacturing Technology Show, September 28 – October 1, 2015.Â- The show, Canada's largest manufacturing and technology show, will be held in Mississauga, Ontario and attended by over 8,000 professionals. Nutfield Technology will be in booth number 1266 in Hall 1 - in the...
Read More »Nutfield Tech is Leading the Way When it Comes to Galvanometer Optical Scanning Devices
Hudson NH — Nutfield Technology (www.nutfieldtech.com) has been designing and innovating galvanometer optical scanning devices for almost 20 years.Â- With four-week standard lead time, outstanding technical support and high performance products, Nutfield Tech manufactures galvanometer optical scanning devices that provide outstanding value. Nutfield Technology provides both optical...
Read More »
There's More to Plating than You Zinc!
To find out more about the seven demands you should make of your zinc plater, download now.
Read More »Nutfield Leads the Way in Galvanometer Mirror Scanners Including Two and Three Axis Scan Heads
Hudson NH — Nutfield Technology has been designing and innovating galvanometer mirror scanners, scan heads and scan control software since 1997. Known for innovative design and manufacture, Nutfield recently expanded into a 20,000 square-foot facility. Their commitment to high quality, affordability and innovation make them an ideal partner, with four-week lead times, and outstanding technical...
Read More »Nutfield Broadens its Range of Galvanometer Scan Heads Introduces D-20 XY Digital Scan Head
Hudson NH — Nutfield Technology, (www.nutfieldtech.com), one of the leading providers of galvanometer scanners has one of the broadest arrays of galvanometer scan heads. The D-20 XY galvanometer scan head is their latest product. A fully digital, encoder-based scan head, the D-20 is ideal for applications requiring the highest levels of accuracy as well as stability. Because the D-20 XY is a...
Read More »Galvanometer, Scan Head Maker Nutfield Technology to Attend Photonics West in February
Hudson NH Â- — Nutfield Technology, (www.nutfieldtech.com), one of the leading providers of mirror galvanometer and scan head and laser scanner technology, is slated to attend SPIE Photonics West trade show February 10th through the 12th at the Moscone Center in San Francisco. The three-day show, which boasts more than 20,000 attendees and two exhibition halls, will have 1,250...
Read More »Galvanometer/2D Scan Systems leverage digital encoder technology.
To offer maximumÂ- dynamic performance, single-axis dynAXISse galvanometer scanner units and intelliSCANse 2D scan systems leverage digital position detection approach that lowers moments of inertia of drives in high-precision semiconductor processing or micro-structuring. Digital se-encoder (SCANLAB encoder) uses zero-mass laser beam to sense stationary scale,...
Read More »Bearing Versus Flexures Which is Best? It Depends on the Laser Galvanometer Application
Hudson NH — Nutfield Technology,Â- (www.nutfieldtech.com), the leader in mirror galvanometer scanner manufacturing, offers laser galvanometer scanners that use bearings. They also offer laser galvanometer scanners that use flexures. Both methods are used to allow the galvanometer mirror to rotate on its axis. Most galvo laser scanners have ball bearings. Nutfield QS scanners with...
Read More »Laser Scan Head marks contoured surfaces.
Featuring 3-axis design, Contour Galvanometer Laser Scan Head engraves wood, plastics, and metal by vaporizing material underneath scanner. Unit is also suitable for engraving glass because laser causes microscopic cracks and lifts cracked material off surface. While 2-axis laser scan head operates in X/Y plane for use on flat, 2-dimensional surfaces, Contour moves in third axis, thereby allowing...
Read More »
Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »
