Furnaces

Lindberg/MPH Ships Two Pacemaker Furnaces to be Used for Carburizing and Hardening
Furnaces

Lindberg/MPH Ships Two Pacemaker Furnaces to be Used for Carburizing and Hardening

Riverside, MI – October 20, 2017 – Lindberg/MPH announced the shipment of two electrically heated Pacemaker integral quench furnaces. The Pacemaker IQ furnaces will be used for carburizing and hardening applications. These integral quench furnace systems provide a total solution for your heat-treating processes. The Pacemaker furnaces have maximum temperature ratings of 1850°F, work chamber...

Read More »
Model DL7-R24 Box Furnace comes with 1 ½ in. thick hearth plate.
Furnaces

Model DL7-R24 Box Furnace comes with 1 ½ in. thick hearth plate.

Model DL7-R24 Box Furnace comes with chamber which measures 24 in. H x 24 in. W x 24 in. L dimensions and holds up to 1000 lb. Unit features reinforced angle iron steel frame and 6 ½ in. insulating firebrick and mineral wool block on the side walls. Product’s chamber provides heat treatment for materials at 750°F and is equipped with Ceramic fiber pyroblock modules. Furnace offers...

Read More »
Lindberg/MPH Ships 1200°C Tube Furnace for Technical Research and Development
Furnaces

Lindberg/MPH Ships 1200°C Tube Furnace for Technical Research and Development

September 14, 2017 – Lindberg/MPH announced the shipment is 1200°C hinged, 3 zone, tube furnace. This tube furnace is designed for horizontal use and can be used with a variety of customer supplied ceramic, quartz, or alloy process tubes or retorts. This tube furnace was designed for use with the customers’ existing control system. The work chamber dimensions of this tube furnace are 36” L...

Read More »
Reflow Ovens & Custom Furnaces - Visit BTU in Booth #311 at IMAPS Raleigh
Ovens

Reflow Ovens & Custom Furnaces - Visit BTU in Booth #311 at IMAPS Raleigh

NORTH BILLERICA, Mass., September 29, 2017 — BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing markets, will exhibit in Booth #311 at IMAPS Raleigh, scheduled to take place Oct. 10-12, 2017 at the Raleigh Convention Center in NC. BTU will showcase its PYRAMAX™ reflow ovens and high-temperature belt furnaces. IMAPS seeks to...

Read More »
The Next Wave of Intelligent Design Automation
Sponsored

The Next Wave of Intelligent Design Automation

In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.

Read More »
Lindberg/MPH Ships Stackable Temperite™ and Treet-All™ Box Furnaces to Manufacturer of Maritime Equipment
Furnaces

Lindberg/MPH Ships Stackable Temperite™ and Treet-All™ Box Furnaces to Manufacturer of Maritime Equipment

August 26, 2017 – Lindberg/MPH announced the shipment of a Temperite® box furnace and a TreetAll box furnace to the Maritime industry. The box furnaces are designed to be used in a stacked configuration or stand alone. They can also be used with a roller quench tank if needed. The box furnaces have work chamber dimensions of 12” W x 30” D x 12” H. The Temperite and Treet-All are a...

Read More »
Lindberg/MPH Ships Immersion Lead Melting Furnace to a Manufacturer of Automotive Batteries
Furnaces

Lindberg/MPH Ships Immersion Lead Melting Furnace to a Manufacturer of Automotive Batteries

August 16, 2017 – Lindberg/MPH announced the shipment of a gas-fired immersion lead melting furnace to a repeat customer in the battery industry. The melting and holding furnace will be used in the production of lead plates for automotive batteries. The melting furnace is designed with nine immersion tubes, each with its own burner, boasting over 28,000 square inches of heat transfer area. This...

Read More »
US Auto Parts Manufacturer Orders Lucifer Fiber Lined Box Furnace
Furnaces

US Auto Parts Manufacturer Orders Lucifer Fiber Lined Box Furnace

Lucifer Furnaces, Inc. received an order for an electric ceramic fiber lined box furnace from a leading US stamping manufacturer of automotive products. Model LI7-M18, with a chamber size of 12” W x 18” L x 18” H, quickly heats to a uniform 2200°F. A hotface of 2” ceramic fiber insulation with 3” coldface mineral wool block insulation around the entire chamber maximizes heating...

Read More »
Ipsen USA Responds to Diverse Market Demand in Q2 2017
Furnaces

Ipsen USA Responds to Diverse Market Demand in Q2 2017

CHERRY VALLEY, IL - Shipping 15 atmosphere and vacuum furnaces last quarter, Ipsen USA continues to provide diverse, effective heat-treating solutions to customers around the world. This equipment was sent to China, Hong Kong, India, Japan, Saudi Arabia and the United States - all in support of the Aerospace, Commercial Heat Treating and MIM industries. The shipments included: Two large, vertical...

Read More »
Lindberg/MPH Ships Atmosphere Box Furnace to the Steel and Mining Industry
Furnaces

Lindberg/MPH Ships Atmosphere Box Furnace to the Steel and Mining Industry

July 26, 2017 - Lindberg/MPH announced the shipment of an electrically heated, rod over-bend atmosphere box furnace to the steel and mining industry. This is the second heat treating furnace of this kind that the customer has ordered from Lindberg/MPH. It is designed to meet the customer’s specific process based on the previous existing model they had ordered. The atmosphere box furnace has...

Read More »
Lindberg/MPH Ships Cyclone Box Furnace to Heat Treating Industry
Furnaces

Lindberg/MPH Ships Cyclone Box Furnace to Heat Treating Industry

July 14, 2017 – Lindberg/MPH announced the shipment of a gas fired cyclone box furnace to the heat treat industry. The box furnace will be used for heat treating steel parts and is the second Lindberg/MPH furnace that has been purchased by this customer. The work chamber of this heat treat furnace is designed to accept a basket with dimensions of 48” W x 84” D x 48” H and has a maximum...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers