Furnaces

Thermal Technology Develops Commercial EFG Crystal Grower
Furnaces

Thermal Technology Develops Commercial EFG Crystal Grower

Thermal Technology announces the successful testing of the first commercially available edge-defined, film-fed growth (EFG) crystal grower with the capacity to grow sapphire crystals up to 12 inches wide, 20 inches long and 0.6 inches thick (300 mm x 500 mm x 15 mm). The first sapphire test plate grown was over 15 mm thick throughout, eight inches wide and 16 inches long with no visible bubbles...

Read More »
Modular Furnaces suit metal injection molding industry.
Furnaces

Modular Furnaces suit metal injection molding industry.

Featuring compact furnace layout with construction on structural steel base, MIM-Vac(TM) M is offered in 18 x 18 x 36 or 48 in. sizes to meet demands of metal injection molding (MIM) industry. Use of Molybdenum alloys in hot zone and retort offer creep resistance, high recrystallization temperatures, and long service life, while Sweepgas(TM) technology promotes consistent gas flow dynamics over...

Read More »
Box Furnace operates up to 2,450°F.
Furnaces

Box Furnace operates up to 2,450°F.

Available in 5 models with chamber sizes from 6 x 6 x 12 in. to 9 x 9 x 24 in., Economy High Speed Steel Box Furnace is suited for heat treating high speed steels and glass ceramics. Unit is constructed with lightweight ceramic fiber and mineral wool block insulation within structurally reinforced sheet metal shell. Operating from 230 V, single-phase power supply, furnace has roof-mounted silicon...

Read More »
Furnaces

Centorr Vaccum Industries Launches New Line of Ultra High Temperature 2900°C Heat Treat Furnaces in Laboratory and Production Sizes.

Nashua, NH, 19 October 2009 - Centorr Vacuum Industries announced it has received an order for its high-temperature 2900°C Graphite Heat Treat furnace for a company involved in advanced materials. The new furnace line includes sizes from under 1 cu ft to over 20 cu ft for processing Carbon, Graphite, and other advanced materials and composites. These new furnaces build on the success of...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Furnaces

Solar Manufacturing Commissions 24 Foot Vacuum Car Bottom Furnace in Russia

Souderton, Pennsylvania -- Solar Manufacturing recently completed the shipment and commissioning of a model HCB-84288-2EQ vacuum car bottom furnace to VSMPO-AVISMA Company in Verkhnaya Salda, Russia. This furnace is capable of processing 50,000 pound loads of titanium forgings and plate for aerospace and medical products. "What makes this furnace different than all the other heavy duty vacuum car...

Read More »
Rehm Thermal Systems Showcases New Fast-Firing and Drying Technologies at EUPVSEC 2009, Booth B5/45
Air / Hot Air Dryers

Rehm Thermal Systems Showcases New Fast-Firing and Drying Technologies at EUPVSEC 2009, Booth B5/45

The team at Rehm Thermal Systems are preparing to showcase the company's best-in-class capabilities for solar cell metallization at the 24th European Photovoltaic Solar Energy Conference & Exhibition. Being held from September 21st - 25th in Hamburg, Germany, EUPVSEC 2009 will introduce visitors to the thermal specialist's recently updated line of fast-firing systems and drying ovens. On display...

Read More »
Rehm Thermal Systems Visu2 Software Brings New Best-in-Class Capabilities to Solar Cell Metallization
Air / Hot Air Dryers

Rehm Thermal Systems Visu2 Software Brings New Best-in-Class Capabilities to Solar Cell Metallization

Rehm Thermal Systems recently announced the launch of an advanced new series of firing systems for solar cell metallization to complement their recently updated line of drying systems. The RFS and RFS-D Fast Firing Systems and the RDS 2100 and 3000 drying ovens feature Rehm's Visu2 software which drives a range of advanced process features and thermal control to enable PV manufacturers to move...

Read More »
L&L Special Furnace Company Ships 2 Furnaces to Solar Panel Manufacturer
Furnaces

L&L Special Furnace Company Ships 2 Furnaces to Solar Panel Manufacturer

Aston, PA (August 18, 2009) - L&L Special Furnace Co., Inc. has shipped two high uniformity bell type furnaces for use in the manufacturing of photovoltaic solar panels. The primary purpose of the furnaces is to evenly heat pure silicon bars to temperatures up to 1200°C and hold for 2 to 3 hours, to prepare the material for manufacturing solar cells. The first unit was shipped to the...

Read More »
Fluidaire Cleaning Services Announces Expansion of Polymer Cleaning Applications Lab
Parts Cleaning Services

Fluidaire Cleaning Services Announces Expansion of Polymer Cleaning Applications Lab

Fluidaire Cleaning Services Inc. (FCS), a leading supplier of thermal cleaning systems for the plastics and fiber industries located in New Brunswick, NJ has recently expanded their facility by installing a state of the art Vacuum Pyrolysis Furnace in their applications lab. The new VacuClean 254T supplied by SCHWING from Germany offers unique features designed for quality thermal cleaning of...

Read More »
Excellent Results from Vacuum Gas Nitriding Furnace at Solar Atmospheres
Heat Treatment Services

Excellent Results from Vacuum Gas Nitriding Furnace at Solar Atmospheres

Souderton, Pa. - Solar Atmospheres reports that their recently installed new Vacuum Gas Nitriding Furnace is producing excellent results on all types of steel alloys and part configurations. This new design furnace (Patent Application filed June 13, 2008) with a hot zone that measures 36 wide x 30" high x 48" diameter and has a work load capacity of 2,500 pounds, is considered the ideal...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers