Furnaces

Axles

Can-Eng Furnaces International Limited Announces Successful Start-Up of New Railway Axle Forging Plant

AXIS LLC (a joint venture between major North American rail car builders and assembly/parts providers) announces the successful start-up of the first new railway axle forging plant in United States in more than 40 years. CAN-ENG FURNACES INTERNATIONAL LIMITED supplied, installed and commissioned a 20 tph Rotary Ring Hearth Reheating Furnace, Robotic Manipulator, High Pressure Descale System and...

Read More »
Furnaces

Solar Manufacturing Ships a New R&D Vacuum Carburizing Furnace

Souderton, PA- Solar Manufacturing has shipped a new top loading Model VTC-714 R&D furnace for the process development of low pressure vacuum carburizing (LPVC) of new alloys for aircraft gearing. The customer is a large manufacturer located in the mid-Atlantic US in the aircraft industry. Pete Reh, vice president of sales for Solar Manufacturing stated, The customer and the Solar Development...

Read More »
Heavy-Duty Box Furnace has inert atmosphere construction.
Furnaces

Heavy-Duty Box Furnace has inert atmosphere construction.

Rated to 2,000°F, electrically heated No. 954 features 30 x 48 x 30 in. workspace and 57 kW, supported by vacuum-formed ceramic fiber, installed in nickel chrome wire coils to heat load. Roof-mounted, heat-resistant alloy recirculating fan is powered by 1 hp motor with V-belt drive, and 100 lb capacity alloy loading cart has cast alloy roller rails. Construction also features motor-operated...

Read More »
Furnaces

Can-Eng Furnaces International Limited Receives Contract for Two Rotary Hearth Normalizing Furnaces, TVSZ, TIKHVIN, Russia

CAN-ENG FURNACES INTERNATIONAL LTD, is pleased to announce a contract for the supply of (2) 10 tph Rotary Hearth Normalizing furnaces with Quench and Temper capability. The Rotary Hearth Normalizing furnaces are for steel castings used in railcar truck assemblies, side frames and bolsters. The units will be supplied with a complete Level II Automation system, automated material handling, two (2)...

Read More »
Thermal Technology Develops Commercial EFG Crystal Grower
Furnaces

Thermal Technology Develops Commercial EFG Crystal Grower

Thermal Technology announces the successful testing of the first commercially available edge-defined, film-fed growth (EFG) crystal grower with the capacity to grow sapphire crystals up to 12 inches wide, 20 inches long and 0.6 inches thick (300 mm x 500 mm x 15 mm). The first sapphire test plate grown was over 15 mm thick throughout, eight inches wide and 16 inches long with no visible bubbles...

Read More »
Modular Furnaces suit metal injection molding industry.
Furnaces

Modular Furnaces suit metal injection molding industry.

Featuring compact furnace layout with construction on structural steel base, MIM-Vac(TM) M is offered in 18 x 18 x 36 or 48 in. sizes to meet demands of metal injection molding (MIM) industry. Use of Molybdenum alloys in hot zone and retort offer creep resistance, high recrystallization temperatures, and long service life, while Sweepgas(TM) technology promotes consistent gas flow dynamics over...

Read More »
Box Furnace operates up to 2,450°F.
Furnaces

Box Furnace operates up to 2,450°F.

Available in 5 models with chamber sizes from 6 x 6 x 12 in. to 9 x 9 x 24 in., Economy High Speed Steel Box Furnace is suited for heat treating high speed steels and glass ceramics. Unit is constructed with lightweight ceramic fiber and mineral wool block insulation within structurally reinforced sheet metal shell. Operating from 230 V, single-phase power supply, furnace has roof-mounted silicon...

Read More »
Furnaces

Centorr Vaccum Industries Launches New Line of Ultra High Temperature 2900°C Heat Treat Furnaces in Laboratory and Production Sizes.

Nashua, NH, 19 October 2009 - Centorr Vacuum Industries announced it has received an order for its high-temperature 2900°C Graphite Heat Treat furnace for a company involved in advanced materials. The new furnace line includes sizes from under 1 cu ft to over 20 cu ft for processing Carbon, Graphite, and other advanced materials and composites. These new furnaces build on the success of...

Read More »
Furnaces

Solar Manufacturing Commissions 24 Foot Vacuum Car Bottom Furnace in Russia

Souderton, Pennsylvania -- Solar Manufacturing recently completed the shipment and commissioning of a model HCB-84288-2EQ vacuum car bottom furnace to VSMPO-AVISMA Company in Verkhnaya Salda, Russia. This furnace is capable of processing 50,000 pound loads of titanium forgings and plate for aerospace and medical products. "What makes this furnace different than all the other heavy duty vacuum car...

Read More »
Rehm Thermal Systems Showcases New Fast-Firing and Drying Technologies at EUPVSEC 2009, Booth B5/45
Air / Hot Air Dryers

Rehm Thermal Systems Showcases New Fast-Firing and Drying Technologies at EUPVSEC 2009, Booth B5/45

The team at Rehm Thermal Systems are preparing to showcase the company's best-in-class capabilities for solar cell metallization at the 24th European Photovoltaic Solar Energy Conference & Exhibition. Being held from September 21st - 25th in Hamburg, Germany, EUPVSEC 2009 will introduce visitors to the thermal specialist's recently updated line of fast-firing systems and drying ovens. On display...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics