Furnaces

Bodycote Re-Routes Complete AFC-Holcroft Furnace Line to Mexico
Furnaces

Bodycote Re-Routes Complete AFC-Holcroft Furnace Line to Mexico

Bodycote Thermal Processing, the largest heat treating company in the world, has installed two new UBQ integral quench batch furnaces and support equipment in its Silao, Mexico plant. The complete line of AFC-Holcroft equipment will now consist of: (4) UBQ Universal Batch Quench furnaces with top cool, (4) UBT Temper Furnaces, (1) UBTN Nitrogen Temper, (2) UBW Universal Batch Washers , a UBTC...

Read More »
Spheric Technologies' High-Temperature Continuous Production Microwave Furnace Now Operating at Alfred University NanoMaterials Innovation Center; First in Western Hemisphere
Induction Heaters

Spheric Technologies' High-Temperature Continuous Production Microwave Furnace Now Operating at Alfred University NanoMaterials Innovation Center; First in Western Hemisphere

Phoenix, AZ - The Western Hemisphere's first high-temperature (1500° C) continuous production microwave furnace is now fully functional at New York's NanoMaterials Innovation Center (NMIC), a wholly owned subsidiary of Alfred Technology Resources, Inc. (ATRI), near the campus of Alfred University. The announcement came from Spheric Technologies, Inc., the Arizona company that sold the...

Read More »
EU PVSEC 2010 in Valencia - Rehm Thermal Systems Shows Solar Equipment for Metallization Lines
Process Machinery

EU PVSEC 2010 in Valencia - Rehm Thermal Systems Shows Solar Equipment for Metallization Lines

Rehm Thermal Systems presents an advanced new series of drying systems and firing systems for solar cell metallization at EU PVSEC in Valencia, September 6-9, 2010. These Systems offer a range of advanced process features and thermal control that enable PV manufacturers to move their processes to an entirely new level of efficiency and yield. Solardryer RDS 2100 and RDS 3000 The drying process...

Read More »
Furnaces

AFC-Holcroft Supplies Equipment to Process Wind Energy Gearboxes for Wind Energy

AFC-Holcroft is pleased to announce the receipt of a new furnace order for a sealed quench furnace line that will be used to process specialized components utilized in the wind energy market. The furnace line is based on AFC-Holcroft's standard, modular UBQ (Universal Batch Quench) family of products, but was modified to optimize its efficiency for the mix of products required by this customer....

Read More »
Furnaces

Solar Manufacturing Receives Order for New Large Horizontal Vacuum Furnace

SOUDERTON, Pa--Solar Manufacturing announces it has received an order for a large horizontal vacuum furnace from a major high purity metals and alloy producer serving the aerospace, aircraft and medical industries. Primary application for the furnace will be a dehydriding process. The furnace is a Solar Manufacturing Model HFL-6660-EQ horizontal, front loading design with a work zone that...

Read More »
Thermal Technology Receives Order for Spark Plasma Sintering System
Furnaces

Thermal Technology Receives Order for Spark Plasma Sintering System

SANTA ROSA, Calif., July 20, 2010 - Thermal Technology recently received an order from a European customer for a large, laboratory scale Spark Plasma Sintering (SPS) system with 25 tons of force and a 10,000 amp power supply. Thermal Technology's SPS systems are designed with highly rigid four post press frames, an extra large working chamber and large access doors. The flexible footprint...

Read More »
Vertical Top-Loading Vacuum Furnace is suited for R/D work.
Furnaces

Vertical Top-Loading Vacuum Furnace is suited for R/D work.

Featuring 7.5 in. dia x 14 in. high Hot Zone and max operating temperature is 3,000°F, Model VTL-714 is suited for homogenizing and heat treating refractory alloys, performing diffusion couple experiments, and other proprietary heat treat work. Furnace employs graphite heating elements; 35 cfm, 2-stage vacuum pumping system; graphite felt and FlexShield hot face insulation; and partial gas...

Read More »
Induction Heaters

Inductoheat Inc Ships Induction Billet Heating System to Supplier of Hand Tools

Inductoheat, Inc., has designed, manufactured and shipped a Uniforge® Induction Billet Heating System to a leading manufacturer of hand tools (hammers, wrenches and fubars...etc.). This machine was designed specifically for heating carbon steel billets for a #8 die forger. This system is designed to heat 0.50 to 0.875" diameter x 13" long billets to 2250°F at a nominal rate of 250...

Read More »
Process Machinery

Harper International Awarded Advanced Thermal Processing System Contract for Sintering Nuclear Fuel Pellets

Buffalo, NY − Harper International has been awarded a contract to supply an advanced thermal processing system for the sintering of nuclear fuel pellets. Harper International has a global reputation for custom designed and highly engineered thermal processing systems for critical and precisely controlled applications in the advanced materials Industry. Sintering is the crucial final step in the...

Read More »
Furnaces

ALD Vacuum Technologies GmbH in Cooperation with the German Federal Ministry of Economics and Technology Will Be Exhibiting at Intersolar North America 2010

SAN FRANCISCO - ALD's SCU400plus is one of the most widely-spread and reliable production systems for Directional Solidification of multi-crystalline solar Silicon ingots (DSS) with leading wafer producers as customers all over the world. ALD has been a pioneer in the development of DSS furnaces. First installations of ALD's DSS furnaces date back as early as 1996. ALD's more than twelve years of...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics