Fume Hoods

Enclosures protect users during nanoparticle manipulation.
Fume Hoods

Enclosures protect users during nanoparticle manipulation.

Featuring all-stainless steel interior and NanoSafe Tested(TM) validation, XPert® Nano(TM) Enclosures keep hazardous powders and particulates contained during procedures such as nanoparticle manipulation and dry powder chemical handling. It draws room air into front of enclosure, sweeping cabinet interior, and pulls air to back through baffle. Air is cleansed through 99.999% bag-in/bag-out...

Read More »
Protector XStream Laboratory Hood offers Unsurpassed Containment of Chemical Fumes and Vapors While Conserving Energy
Fume Hoods

Protector XStream Laboratory Hood offers Unsurpassed Containment of Chemical Fumes and Vapors While Conserving Energy

Protector XStream Laboratory Hoods overcome airflow tendencies for turbulence. The innovative and aerodynamic designs of the sash handle, air foil, upper dilution air supply and rear downflow baffle work in concert to produce horizontal airflow patterns that significantly reduce concentrations of chemical contaminants throughout the work area, particularly near the face of the hood, operator...

Read More »
Extraction Hood and Filter Bank provide weld fume control.
Fume Hoods

Extraction Hood and Filter Bank provide weld fume control.

Modular Extraction Hood features semitransparent welding strips to prevent cross drafts and control airflow direction. Double-panel roof configuration acts as in-line baffle, deflection plate, and spark arrestor to protect ductwork. Incorporating dust hopper collector and MERV 16 rated filters, Statiflex® Filter Bank can contain 1 of 8 filter units, with filtration station ranging in sizes...

Read More »
Ductless Fume Hood features removable spillage tray.
Fume Hoods

Ductless Fume Hood features removable spillage tray.

With face velocity at 100 fpm, Purair 20 ensures containment of fumes and alerts operator with alarm when airflow falls to unacceptable level. Switches and electrical components are isolated from dirty airflow, while all mechanisms in head section are on clean side of filter. Measuring 49 x 27.5 x 47.5 in., unit is available with choice of 14 different types of carbon filters including specialty...

Read More »
Ductless Enclosures enable mobility from area to area.
Fume Hoods

Ductless Enclosures enable mobility from area to area.

Available in 2, 3, 4, 5, and 6 ft widths, self-contained Paramount® Ductless Enclosures use 6 different carbon stackable filter types to allow safe handling of organic, formaldehyde, acid gas, sulfur compounds, or ammonia chemical fumes and vapors. HEPA filters with 99.99% efficiency may be used to handle different types of chemicals and particulates during same application. Unlike...

Read More »
Enclosures are validated for nanomaterial containment.
Fume Hoods

Enclosures are validated for nanomaterial containment.

Designed to protect users during nanoparticle manipulation and dry powder chemical handling, XPert® Nano(TM) Enclosures draw room air in, sweeping cabinet interior and pulling air to back through baffle, then filtering air through 99.999% bag-in/bag-out ULPA filter before returning clean air to laboratory. Stainless steel interior facilitates wipe down and cleaning procedures, while...

Read More »
Laboratory Hoods minimize turbulence, optimize airflow.
Fume Hoods

Laboratory Hoods minimize turbulence, optimize airflow.

Operating at face velocities from 60-100 fpm, Protector XStream Hoods overcome airflow's tendencies for turbulence. Aerodynamic design of sash handle, air foil, upper dilution air supply, and rear downflow baffle work to produce horizontal airflow patterns that minimize concentrations of chemical contaminants throughout work area. Hoods include chemical-resistant, molded composite panel liner;...

Read More »
Ductless Fume Hoods come in 36 in. deep models.
Fume Hoods

Ductless Fume Hoods come in 36 in. deep models.

Available in 3, 4, 5, and 6 ft wide folding-sash models, Ductless Fume Hoods utilize gas phase bonded carbon filter, which eliminates filter dusting and dead zones associated with granular carbon filters. Each unit uses microprocessor-based automatic safety controller, keeping constant check on airflow and filter quality, and alerting operator in event of filter saturation. Designed to meet and...

Read More »
Fume Hoods

New Esco Frontier Acela(TM) High Performance Laboratory Fume Hoods

(Singapore, August 11, 2008) Based on Berkeley Fume Hood technology, developed at the Lawrence Berkeley National Laboratory, USA, exclusively licensed by Esco, the NEW Frontier Acela(TM) Laboratory Fume Hood has been designed to address the needs of all stakeholders. Frontier Acela(TM) incorporates the patented* Berkeley perforated baffle design, aerodynamic sash handle, side vanes, flush-mounted...

Read More »
Fume Hoods

Ductless Fume Hood is based on folding-sash design.

Measuring 60 in. wide, AC5000 polypropylene ductless hood utilizes gas-phase-bonded carbon filter and microprocessor-based automatic safety controller for checking airflow and filter quality and alerting operator in event of filter saturation. By stacking HEPA filter, followed by bonded carbon filter, operator can remove toxic particulate and chemical fumes. Designed to accommodate up to 7 in. of...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics