Frequency Synthesizers

Frequency Synthesizers

PLL Synthesizer targets satellite modem equipment.

Operating from 470–520 MHz with 100 kHz step size,Â- Model PCA0495B-LF provides phase noise of -97 dBc/Hz at 10 kHz offset and can be programmed through 3-wire serial interface. Device delivers typical output power of 4 dBm into 50 Ω load while operating off single supply voltage of 3.3 Vdc and consuming 25 mA of current. Housed in 0.50 x 0.50 x 0.13 in. package, synthesizer features...

Read More »
Frequency Synthesizers

PLL Synthesizer facilitates improved integrated phase noise.

Supplied in 20-lead LFCSP,Â- ADF4153A has RF bandwidth of 4 GHz and consists of low-noise digital phase frequency detector, precision charge pump, sigma-delta fractional-N divider, and programmable reference divider. Features include 2.7–3.3 V power supply, 1.8 V logic compatibility, -223 dBc/Hz PLL phase noise figure of merit, and PLL 1/f noise figure of -121 dBc/Hz @ 10 kHz offset...

Read More »
Fixed Frequency Synthesizer has low phase noise.
Frequency Synthesizers

Fixed Frequency Synthesizer has low phase noise.

Model SFS4000C-LF features phase noise of -102 dBc/Hz at 10 kHz offset and typical sideband spurs of -65 dBc. Single frequency, RoHS-compliant synthesizer has 2nd harmonic suppression of -15 dBc and is phase locked at 4,000 MHz while using 10 MHz reference. Running offÂ- 5 Vdc supply and 3.3 Vdc PLL chip voltage, 0.60 x 0.60 x 0.22 in. coaxial resonator delivers output power of 0 dBm into 50...

Read More »
Frequency Synthesizers

Maxim's Essential Solutions Anticipate the Next-Generation Cellular Network

Maxim Integrated Products leverages analog integration to enable the evolving heterogeneous network (HetNet) SAN JOSE, Calif.- Maxim Integrated Products (NASDAQ: MXIM) announces several essential HetNet solutions needed for next-generation base-station equipment. The solutions include single-chip multiband radio transceivers, broadband gain blocks, direct RF synthesis DACs, and intelligent,...

Read More »
Frequency Synthesizers

Direct Digital Synthesizer ICs offer up to 64-bit resolution.

Synthesizing analog output sinusoidal waveforms at up to 1.4 GHz, programmable DDS ICs achieves clock speeds of 3.5 GSPS (Model AD9914) and 2.5 GSPS (Model AD9915). Units include 32-bit parallel port, for changes to frequency, phase, and amplitude of output signal, and 12-bit D/A converter. They also feature programmable modulus mode for precise frequency generation. Consuming approximately 2.5 W...

Read More »
Frequency Synthesizers

Fractional-N PLL Synthesizer suits FMCW radar applications.

With 25-bit fixed modulus and on-chip functionality to generate linear ramp profiles, 13 GHz ADF4159 achieves phase detector operating frequency of 110 MHz and simultaneously consumes less than 100 mW of power. Product consists of low-noise digital phase frequency detector, precision charge pump, and programmable reference divider. Along with cycle slip reduction circuitry, frequency sweep modes...

Read More »
Frequency Synthesizers

New Analog Devices' PLL Synthesizers Deliver Utmost Flexibility and Phase Noise Performance

NORWOOD, Mass. - Analog Devices, Inc. (ADI), a global leader in high-performance semiconductors for signal-processing applications and leading provider of RF ICs (radio frequency integrated circuits), today announced the release of two new PLL synthesizer that allows utmost flexibility and phase noise performance. The ADF4151 and ADF4196 PLL synthesizers ease design in a variety of applications...

Read More »
Frequency Synthesizers

Frequency Synthesizer features 18 GHz operating bandwidth.

Comprised of low noise, digital phase frequency detector; precision charge pump; programmable reference divider; and high-frequency programmable feedback dividers, ADF41020 can be used to implement local oscillators as high as 18 GHz in up-conversion and down-conversion sections of wireless receivers and transmitters. Bandwidth lets designers potentially eliminate frequency-doubler stage, and...

Read More »
L-Band Fixed Frequency Synthesizer features low phase noise.
Frequency Synthesizers

L-Band Fixed Frequency Synthesizer features low phase noise.

Operating at 1,900 MHz, model SFS1900A-LF features typical phase noise of -98 dBc/Hz @ 10 kHz offset and typical sideband spurs of -70 dBc. RoHS-compliant product is designed to deliver typical output power of 0 dBm with VCO voltage supply of 5 Vdc while drawing 25 mA (typ) and phase locked loop voltage of 3.3 Vdc while drawing 10 mA (typ) over -40 to +85°C range. Typical 2nd harmonic...

Read More »
Frequency Synthesizers

Dual-PLL Synthesizer IC features ultra low jitter.

Suited for high-speed telecommunication applications, Model MPS14 offers 0.2-0.45 ps jitter and advanced clocking functions through external FPGA logic. Dual PLLs independently generate output frequencies from 12-938 MHz with precision better than 0.1 ppb. Operating from fundamental mode crystal in range of 22-54 MHz, Model MPS14 eliminates need for poorly available SAW, inverted-mesa, and third...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics