Frame Grabbers

Frame Grabber offers image capture rates up to 280 MBps.
Frame Grabbers

Frame Grabber offers image capture rates up to 280 MBps.

Supporting 2 high-resolution SILICON VIDEO® cameras on x1 PCI Express bus, PIXCI® SI2 comes with 64 MB of on-board memory, and allows capture of short bursts of high-resolution images from 2 cameras. It provides free-run and async capture modes, and is available with standard height or low-profile bracket. TTL trigger and strobe connectors allow async capture and strobe control, while...

Read More »
Frame Grabber supports 2 PoE channels and link aggregation.
Frame Grabbers

Frame Grabber supports 2 PoE channels and link aggregation.

Providing 2 independent Gigabit Ethernet ports with data transfer rates up to 1 Gbps, GIE62+ PoE frame grabber supports Link Aggregation Control Protocol (LACP), allowing 2 ports to be configured as Link Aggregation Group (LAG) and provide sustained maximum data rate of 2 Gbps. It also offers automatic detection of being a powered device within system to ensure connections between other PoE and...

Read More »
PCIe Video Frame Grabber suits hi-res HDTV video inputs.
Frame Grabbers

PCIe Video Frame Grabber suits hi-res HDTV video inputs.

In addition to HD SDI standard and digital HDMI or analog YPrPb format video inputs, Nexeon HD Xtra supports display and capture from HDTV sources up to 1080i and VGA display sources up to 1,280 x 1,024. Texas Instruments DM642 video processor and 64 MB on-board frame buffer memory, included, promote reliable video data capture and transmission. Other features include automatic digital camera...

Read More »
Frame Grabber works with 32-/64-bit Windows® and Linux.
Frame Grabbers

Frame Grabber works with 32-/64-bit Windows® and Linux.

Suited for medical and military industries, VGA2Ethernet PRO can capture image from VGA stream at resolutions up to 2,048 x 2,048, digitize it, and send it over network to local/remote computer. It achieves pixel rates up to 270 MP/sec and capture rates to 120 fps under different conditions. Via pre-compression technology, workload of standard compression algorithms is minimized by eliminating...

Read More »
Frame Grabber leverages PCI Express platform.
Frame Grabbers

Frame Grabber leverages PCI Express platform.

Designed to support Piranha HS 12k 90 kHz camera, Xcelera(TM)-HS PX8 uses HSLink machine vision connectivity interface to deliver image acquisition bandwidth of 1.5 GBps and host transfer bandwidth of 2 GBps over multiple-lane PCI Express implementations. HSLink delivers scalable bandwidth in 300 MBps steps, from 300-6,000 MBps. Applications include solar cell, flat panel display, semiconductor,...

Read More »
Frame Grabber transfers camera data to notebook computer.
Frame Grabbers

Frame Grabber transfers camera data to notebook computer.

PIXCI® ECB1-34 base Camera Link frame grabber features 200 MB/sec sustained data transfer rates, with burst transfers up to 250 MB/sec. Unit plugs into ExpressCard/34 or ExpressCard/54 slot in notebook computer. Capturing from line scan or area scan cameras operating in free-run or controlled mode, unit generates programmed width exposure signal to camera for each trigger input. It includes...

Read More »
Frame Grabber offers PCI Express compatibility to cameras.
Frame Grabbers

Frame Grabber offers PCI Express compatibility to cameras.

Available with standard or low-profile bracket, PIXCI® SI1 offers sustained data transfer rates at 190 Mb/sec and burst transfers of 250 Mb/sec. Allowing use of SILICON VIDEO® cameras on PCI Express bus, unit captures images over software-selectable pixel clock range of 25-70 MHz. It supports 64-bit memory addressing for writing long-duration image sequences into terabytes of memory....

Read More »
Frame Grabber supports single Base cameras.
Frame Grabbers

Frame Grabber supports single Base cameras.

Fully compliant with Camera Link® specifications and Power Over Camera Link®, Xcelera-CL LX1 Base can acquire images from variety of multi-tap area and line scan, color, and monochrome cameras. PCIe point-to-point host interface allows simultaneous image acquisition and transfer with little intervention from host CPU. Combining acquisition and external control signals on single PCIe...

Read More »
Frame Grabbers

Frame Grabber features Altera® Stratix®III processing FPGA.

Matrox Radient eCL is half-length x8 PCIe® card that transfers data from 10 tap, 85 MHz cameras to host CPUs, supporting up to 4 base or 2 full-mode Camera Link® cameras. Unit offloads processing of functions such as filtering, transforms, flat field correction, and dead pixel replacement. Supporting 32- and 64-bit versions of Windows® XP/Vista and Linux, it is programmed with...

Read More »
Mini-PCIe Video Capture Card has flexible video input MUX.
Frame Grabbers

Mini-PCIe Video Capture Card has flexible video input MUX.

Integrating all functions needed to perform external A/V capture for various applications, MPX-885 color frame grabber features worldwide video and audio decoders, 10-bit video ADCs, and 10-bit video data path. Its 2D adaptive comb filter supports NTSC, PAL, and SECAM video; one of these can also be supported for color formats, while Y8 is supported for monochrome. Also, 16-bit audio resolution...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics