Force Sensors / Transducers

Strain Gage Amplifiers handle multiple channels.
Force Sensors / Transducers

Strain Gage Amplifiers handle multiple channels.

MAC MultiAmplifier Card and IMUX Tension Multiplexer provide multi-point tension monitoring. MAC amplifies signals from up to 8 tension transducers or load cells, and supplies corresponding number of 0 to 10 Vdc signals. Signals may be used as inputs to drives, PLCs, or other control devices. Additional 0 to 1 mA or 0 to l00 microA signal is supplied as meter output. IMUX can select and display...

Read More »
Force Transducers can be used as test standards.
Force Sensors / Transducers

Force Transducers can be used as test standards.

The Z30 family delivers selection of measuring ranges including 50, 100, 200, and 300 N plus 1, 2, 5, and 10 KN models. With maximum operating force of 150%, rated output is 2 mV/V, and nominal excitation is 5V. Operating temperature range is -10 to +70°C and nominal accuracy is 0.03%. Transducers are suitable for precision force measurements in labs, government and industrial calibration...

Read More »
Torque Transducer withstands heavy use.
Force Sensors / Transducers

Torque Transducer withstands heavy use.

Model 2100 Reaction Torque Sensor has high torsional stiffness to withstand high duty cycling and structural life testing. It is temperature compensated from -65 to + 200°F, has output sensitivity of 1mV/V, and conforms to ANSI Z540 calibration standard traceable to NIST. Sensor is available in 12 capacities from 150 to 8,000 lb-ft. Non-linearity and hysteresis are 0.15% or better. Sensors...

Read More »
Dynamometer Torque Sensor provides non-contact operation.
Force Sensors / Transducers

Dynamometer Torque Sensor provides non-contact operation.

Model 2002 Companion Drive Dynamometer Torque Sensor features digital telemetry system that is immune to RF, PWM, and EM interference. Capacities range from 150 to 8,000 lb-ft in selectable mount configurations to mate to existing U-joints or companion flanges. Standard output is ±5 Vdc with overall accuracy of 0.25% or better. Power requirements are 120 Vac with input-sampling rate of...

Read More »
Torque Sensors cover capacities from 10 oz-in. to 100 lb-in.
Force Sensors / Transducers

Torque Sensors cover capacities from 10 oz-in. to 100 lb-in.

Series STH Universal Torque Sensors, with aluminum housing, can be used as hand tools or mounted in fixture. Quick-change chucks cover range of 0.028 to 0.5 in. diameter samples, as well as 1/4 in. hex-tool bits. Units offer peak torque memory in clockwise and counter-clockwise directions, rechargeable battery or AC operation, programmable HI/LO limit outputs, selectable automatic shut-off, and...

Read More »
Torque Transducers suit transmission test stands.
Force Sensors / Transducers

Torque Transducers suit transmission test stands.

Series T10FS torque transducers are based on modified T10F measuring body, and use transverse stress measurement principle. Models offer torque ratings from 369 lb-ft to 7,376 lb-ft and speeds up to 22,000 rpm. They feature signal telemetry, non-contact torque measurement, reproducibility of less than ±0.02%, and linearity deviation of less than ±0.03%. There are no bearings or slip...

Read More »
Torque Sensor converts shafts into rotary torque sensors.
Force Sensors / Transducers

Torque Sensor converts shafts into rotary torque sensors.

Model 1650B clamps onto drive train and converts shaft into rotary torque transducer within 15 minutes. It does not require installation of slip rings, and comes pre-calibrated. Suitable for proving trials or commissioning driver/driven transmission trains, model 1650B can be used for temporary or permanent installations. Immune to oil, dirt, and water, unit is available for shafts with 2.5 to 15...

Read More »
Torque Sensors measure in both directions.
Force Sensors / Transducers

Torque Sensors measure in both directions.

Model 2133 Series measures static torque in clockwise or counterclockwise directions. Models cover torque ranges from 10 to 1000 lb-ft in 7 different rated capacities, with Â-¼ to 1 in square drive size configurations. Each unit is temperature compensated from 70 to 170°F over useable temperature range from -65 to +200°F. Accuracy is ±0.25% of rated output with sensitivity...

Read More »

All Topics