Force Sensors / Transducers

Piezoelectric Force Washer is rated at 20 kN nominal force.
Force Sensors / Transducers

Piezoelectric Force Washer is rated at 20 kN nominal force.

Measuring 14.5 mm in diameter with height of 7 mm, Model CFW/20KN features symmetrical design that is mounted by connecting inner and outer ring to surrounding construction. IP65-rated unit is suitable for applications in rough industrial environments and those where very little space is available. Sensor is operated together with CMA Series charge amplifiers or CMD Series digital charge...

Read More »
Wheel Force Transducer suits fuel-efficient cars.
Force Sensors / Transducers

Wheel Force Transducer suits fuel-efficient cars.

RoaDyn® S615 System 2000 6-component unit is based on 3 load cell concept and features carbon fiber reinforced plastic rim, rim ring, and wheel disk. Device allows maximum vertical load Fz of approximately 15 kN. Mounted on vehicle as complete wheel, it measures forces Fx, Fy, and Fz and torques Mx, My, and Mz on rotating wheel. Measurement signals are converted to digital in wheel...

Read More »
Triaxial Force Sensors measure from ±1.8k to ±33.7k lbf.
Force Sensors / Transducers

Triaxial Force Sensors measure from ±1.8k to ±33.7k lbf.

Three-component triaxial force links are fully calibrated and preloaded for dynamic force measurements in 3 orthogonal directions, in both tension and compression modes, across various applications and regardless of acting point of force. All dynamic sensing elements are located in rust-free, sealed, stainless steel housing. Type 9327C triaxial quartz force link includes rigid construction and...

Read More »
Measuring Hub for Tire Test Stands meets resistance standards.
Force Sensors / Transducers

Measuring Hub for Tire Test Stands meets resistance standards.

Featuring 2-component design, RoaDyn® S220 measuring hub Type 9289A103 measures changes in rolling resistance in tangential direction Fx as close as possible to tire footprint. Use of strain gage technology allows static measurement of contact force Fz and control of test stand. Reliant upon force measurement method, product meets requirements of rolling resistance standards ISO 28580, SAE...

Read More »
Tension/Compression Sensors have ±8 kN measuring range.
Force Sensors / Transducers

Tension/Compression Sensors have ±8 kN measuring range.

Preloaded in 42 x 42 x 42 mm sealed, stainless-steel housing, 3-component type 9327C Force Link sensors measure tension and compression forces regardless of point of application. Measurement ranges are Fx,y = ±4 kN and Fz = ±8 kN, and design is intended to reduce crosstalk as well as hysteresis. Operating from -40 to +120°C, sensors use V3 multipole connector and are available...

Read More »
Digital Torquemeters replace two sensors.
Force Sensors / Transducers

Digital Torquemeters replace two sensors.

Featuring 2 ranges with independent outputs, MCRT® 79700V Series accurately measures torque, even if ratio of peak to average torque is high. Three simultaneous analog outputs can be individually set to 5 or 10 V at each range full scale. Overrange is 150-300% and mechanical overload is 200% of High range and 1,000% of Low range. With RS232 serial port, units can provide digital output of...

Read More »
Thin Force Sensor offers plug and play operation.
Force Sensors / Transducers

Thin Force Sensor offers plug and play operation.

Operating from supply voltage of 4.5-5.25 Vdc, model 1131 thin force sensor can measure force between almost any 2 surfaces. It has current consumption of 0 mA at no load and 1.45 mA at max load. Specifications include output impedance of 3.3 kW, max force of 2 kg, and accuracy of ±10%. Product can be programmed using Application Programming Interface supported under Windows (2000, XP,...

Read More »
Force Sensor Adapter interfaces sensors to PC.
Force Sensors / Transducers

Force Sensor Adapter interfaces sensors to PC.

Model 1120 - FlexiForce Adapter connects to one of analog inputs on 1018 - PhidgetInterfaceKit 8/8/8. It is designed for use with FlexiForce sensor, which can measure force between almost any two surfaces and is durable enough for most environments. Featuring supply voltage range of 4.5-5.25 Vdc, adapter has current consumption at maximum load of 3.20 mA and consumes 10.9 mA at overload. Unit is...

Read More »
Force Sensors / Transducers

South Boston Manufacturer Wins Electronic Products Product-of-the-Year

Each year, Electronic Products magazine editors select the most innovative and forward-thinking new products introduced to the electronics market. South Boston sensor manufacturer Tekscan, Inc. is honored to announce that its newest sensor product, the High-Temp FlexiForce® sensor, has been chosen among thousands of products as product of the year by Electronic Products editors. High-Temp...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics