Force and Load Indicators

Montalvo to Offer Innovative Web Control Products at "Ice" Trade Show in Munich in March 2013
Force and Load Indicators

Montalvo to Offer Innovative Web Control Products at "Ice" Trade Show in Munich in March 2013

Gorham, Maine - The Montalvo Corporation, international specialists in industrial web control systems, will be in HALL A6, STAND 584 at the ICE (International Converting Exhibition) Trade Show, March 19-21, 2013, in Munich, Germany. Among the web control products displayed by Montalvo at ICE EUROPE will be some new products including Montalvo's NS Load Cells, Filament Load Cell, ES load cells,...

Read More »
Force and Load Indicators

Tension Indicator provides 24 V alarm output.

Offering either single or multiple tension zone monitoring, Model i4-HD can be supplied with analog or LCD digital meter displays. Unit provides excitation voltage as well as zero and calibration circuitry. Output can interface with PLC, PC, or DC/AC or servo drives. Compatible with most semiconductor strain gauge and foil gauge load cells, Model i4-HD delivers accurate and repeatable web tension.

Read More »
Digital Force/Torque Indicators have interchangeable sensors.
Force and Load Indicators

Digital Force/Torque Indicators have interchangeable sensors.

Models 5i and 3i, featuring backlit graphic LCDs and Plug and Test(TM) technology, save all calibration and configuration data within sensors' smart connectors. Force sensors are available in capacities up to 10,000 lbf, and torque sensors are available in capacities up to 5,000 lbf-in. At up to 7,000 Hz, Indicator sampling rates enable accurate results for quick-action tests. Data can be...

Read More »
Force and Load Indicators

Strain Gauge Indicator can be used in jet engine thrust testing.

Used for measurement and control of strain gage transducer based systems, Model 4215 offers 2 independent lines of 20-character display for simultaneous viewing of both channels. Calibration-quality, unit combines force channels, encoder position channels, print capabilities, and RS-232/485 serial communications. In addition to bipolar range ±999,999 display with 24-bit resolution, features...

Read More »
Tension Measurement Device targets pre-stressed wire/cable.
Force and Load Indicators

Tension Measurement Device targets pre-stressed wire/cable.

Digiforce noncontact tension measurement device is battery-powered, handheld instrument that measures tensile forces via magnetic sensor once wire or cable is struck with included mallet. Frequencies of 3-70 Hz are used to measure vibrations, while software processes only frequencies of interest that contribute to measurement. On-board data logging, LCD, and RS232 port/USB converter for downloads...

Read More »
Tension Indicators feature compact, general-purpose design.
Force and Load Indicators

Tension Indicators feature compact, general-purpose design.

Powered by 24 Vdc, EasyView tension indicators amplify web tension signal from transducers installed in machine's web path. Web tension amplifier displays tension reading on analog or digital meter, while supplying isolated 0-to-10 Vdc tension signal output to PLC, drive, or controller. Zero and calibration settings are stored digitally, allowing stable and drift-free output over time and...

Read More »
Force and Load Indicators

Screw Counter helps prevent screw fastening errors.

Designed to detect cross-threading, omissions, unfinished rundowns, and cycle incompletes, Scout Screw Counter verifies that all fasteners are installed and seated to tool's preset torque setting. Programmed manually through keypad, Scout provides audible and visual indications that assembly has been completed or rejected, and displays type of fastening error on screen. Scout can store multiple...

Read More »
Measurement Flange comes in 2 standard torque ranges.
Force and Load Indicators

Measurement Flange comes in 2 standard torque ranges.

Available with nominal torques of 5 and 10 kNom, T40 torque flange has compact design that facilitates integration in test bench and copes with impact/vibration. Data transmission between rotor and stator is digital, ensuring error-free measured value acquisition and transmission even under difficult ambient conditions involving EMI or fluctuating temperatures. Maintenance-free design employs no...

Read More »
Force and Load Indicators

Load Indicator is available in capacities from ½ to 10 tons.

Dynafor LLX2 load indicators feature cross-plane design where upper and lower attachment points are positioned 90° from each other allowing articulation in 2 planes. Available display options include lb, short ton, metric ton, Kg, Kn, and daN, with accuracy of .1%. Other features include 2.4 GHz ZIGBEE connection between sensor and display with 260 ft range, ability to monitor up to 8...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics