Drills and Cutters provide portable presses and accurate holes.

Durabore(R) Drillmate(R) converts hand held air drills, corded electric, and battery operated hand drills into portable drill presses. Hole diameters up to 1 1/16 in. are produced with 1/2 in. hand drills when using DuraBore(R) center free mini cutters. Vacforce(R) converts hand held air drills into 8 lb portable drill presses. Hole diameters to 1 1/16 in. through 5/8 in. material thickness are...

Read More »
Divider/Feeder provides representative samples.

Divider/Feeder provides representative samples.

PT 100 Sample Divider ensures that sample represents entire bulk instead of random samples taken out of buckets with spatulas or spoons. Rotating rifflers spilt up to 5 L of inhomogeneous samples with wide particle size distribution into 6, 8, or 10 representative sub-samples. DR 100 Vibratory Feeder ensures that divider is centered over inlet hopper for no-loss feeding. Feed rate is controlled...

Read More »
Laser Systems cut accurately.

Laser Systems cut accurately.

Z-1 and Z-2 Laser Cutting Systems combine rigidity and accuracy of VMC with Coherent Diamond-Series CO2 pulsed lasers. Z-1 has 100 W laser and 16 x 12 x 10 in. (XYZ) travel, making it suitable for etching, engraving and cutting small metallic and non-metallic parts. Z-2 has 500 W laser and travels of 40 x 20 x 25 in. Both are available with 4th and 5th axis, providing ability to tackle...

Read More »
Cutters and Inserts provide less than 0.0004 in. axial runout.

Cutters and Inserts provide less than 0.0004 in. axial runout.

Fix-Perfect finishing cutters and inserts are for cast iron milling. Radial negative, axial positive rake angle makes chipload of 0.020 in./tooth possible. Inserts have 4 cutting edges and are offered in 2 grades. K110M is uncoated K10 class grade designed for machining speeds of 500 to 1000 sfm. KC520M is K15 class TiAIN coated grade designed for machining speeds from 600 to 1250 sfm. Cutters...

Read More »
Refrigerated Dryers keep compressed air dry.

Refrigerated Dryers keep compressed air dry.

RD Series refrigerated compressed air dryers remove moisture from indoor air lines while providing 35 to 38 deg F dew point, low pressure drops, and no heat exchanger freeze-ups at low loads. It has non-cycling refrigerant compressor, CFC-free R-22 refrigerant, and capacity control valve to maintain steady dew point when flows fluctuate. Models are available to handle flows from 10 to 3,000 scfm...

Read More »
Cover Strips protect miniature ball rail systems.

Cover Strips protect miniature ball rail systems.

Stainless-steel cover strips are pre-cut to rail length and cover mounting holes in profiled rail, eliminating plastic mounting hole plugs. They protect against dirt and contaminants, and provide unbroken rail surface to improve runner block sealing. Miniature Ball Rail Systems include sizes 7, 9, 12, 15 and 20 mm and wide version in sizes 9, 12 and 15 mm. Cover strips can be supplied in one...

Read More »
Tray Packing Machine eliminates hand labor.

Tray Packing Machine eliminates hand labor.

Compact Model 170 packs rigid and semi-rigid containers into variety of corrugated tray types including display, half height and full height. Corrugated dividers may be inserted automatically between product rows for label protection and to add stacking strength. Steel folding arms square and seal each tray around product load for tight-packed trays. Components that contact product are stainless...

Read More »
Round Insert Cutter offers productivity ratio of 10:1.

Round Insert Cutter offers productivity ratio of 10:1.

CoroMill(R) 300 round insert cutter is suitable for machining of materials from soft aluminum to hardened steel. Designed for multi-axis milling, CoroMill 300 is available in long shank versions for machining deep closed pockets and narrow cavities with shallow radial and axial cuts. Available diameters range from 0.375 to 0.750 in. Precision ground inserts are available in carbide grades GC1025,...

Read More »
Collet/End Mill Rack has transparent cover.

Collet/End Mill Rack has transparent cover.

Rack can be used to store up to 72 R8 collets (up to 3/4 in. in dia) or mix of R8 collets and end mills in 1 in. and 25 mm sizes. Made from high impact plastic with black styrene base, rack includes wire back-rise stand, which tilts rack forward to allow users to see inventory more clearly. It provides stacking system for all English and Metric end-mills from 1 to 14 in. and from 25 to 32 mm, and...

Read More »
Hand Wheel Cover prevents ice build-up.

Hand Wheel Cover prevents ice build-up.

Easy Grip silicone hand wheel cover fits over first stage reducer hand wheel on SCBA. It insulates aluminum hand wheel preventing cylinder and hand wheel threads from bonding together. Cover prevents water and ice from entering cylinder/reducer connection while allowing thin layers of ice to be removed by squeezing. Easy Grip fits high and low pressure SCBAs and prevents over tightening of hand...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics