Eurocom Launch NVIDIA GeForce GTX 680M with 1344 Cuda Cores, 4GB GDDR5 Graphics Memory in Line of High Performance Notebook Computers
Eurocom Corporation (www.eurocom.com), a developer of long lifespan, high performance, fully upgradable Notebooks and Mobile Workstations has launched the NVIDIA GeForce GTX 680M GPU with 1344 CUDA cores and 4GB GDDR5 graphics memory in its line of high performance Notebooks. Eurocom will be launching the NVIDIA GeForce GTX 680M in the EUROCOM Neptune 2.0 and Racer 2.0 high performance, fully...
Read More »TCA Technologies Completes Contract for GM Volt Program
Guelph, ON, Canada - TCA Technologies Inc. announced that it has completed a major contract to design and supply a component manufacturing and testing system for Dana Holding Corporation, a Tier One supplier to the Chevrolet Volt program. Dana is supplying its Long® internal battery cell coolers on the first advanced lithium-ion battery for a mass-marketed electric vehicle - General Motors...
Read More »TCA Technologies Completes Contract for GM Volt Program
Guelph, ON, Canada - TCA Technologies Inc. announced that it has completed a major contract to design and supply a component manufacturing and testing system for Dana Holding Corporation, a Tier One supplier to the Chevrolet Volt program. Dana is supplying its Long-® internal battery cell coolers on the first advanced lithium-ion battery for a mass-marketed electric vehicle - General Motors...
Read More »
Light Cutting Insert enhances gear milling operations.
Suited for smaller gear milling machines, including CoroMill-® 170 precision gear milling cutter, -PL geometry flank insert utilizes grade GC1030 and features positive chip breaker that minimizes unwanted cutting forces and vibration. This lends to reduced power consumption or ability to run accelerated and extended cycles. Working in steel application area, typ operations include rough milling...
Read More »
Accelerating Composites Production with Dielectric Cure Monitoring
This white paper provides an in-depth explanation of how dielectric monitoring works, and why it's the best choice for any company working with advanced composite materials.
Read More »
Light Cutting Insert enhances gear milling operations.
Suited for smaller gear milling machines, including CoroMillÃ-® 170 precision gear milling cutter, -PL geometry flank insert utilizes grade GC1030 and features positive chip breaker that minimizes unwanted cutting forces and vibration. This lends to reduced power consumption or ability to run accelerated and extended cycles. Working in steel application area, typ operations include rough...
Read More »
Processor Board delivers quad-core technology.
CP3003 quad-core 3U CompactPCI processor board is scalable up to 2.1 GHz Intel Core i7-3612QE processor. Integrated DirectX 11, OpenGL 3.1 and OpenCL 1.1 capable Intel HD4000 graphics supports 3 independent displays. On 2 SODIMM sockets, processor board CP3003 features up to 16 GB DDR3 1,600 MHz ECC-protected memory for data integrity and system stability. Up to 32 GB of SLC NAND Flash can be...
Read More »
Processor Board delivers quad-core technology.
CP3003 quad-core 3U CompactPCI processor board is scalable up to 2.1 GHz Intel Core i7-3612QE processor. Integrated DirectX 11, OpenGL 3.1 and OpenCL 1.1 capable Intel HD4000 graphics supports 3 independent displays. On 2 SODIMM sockets, processor board CP3003 features up to 16 GB DDR3 1,600 MHz ECC-protected memory for data integrity and system stability. Up to 32 GB of SLC NAND Flash can be...
Read More »
FLAGRO USA - Turning up the Heat on Outdoor Grills!
Burnsville, MN - Silver Giant Grill, Model SGC-72N (Natural Gas) from Flagro USA was recently installed in the Student Union Cafeteria at a California University. Although this unit can be purchased as a built-in model for a more permanent and upscale application, the university decided to purchase the portable model which was more suited to their needs. The 48 Silver Giant Grill was introduced...
Read More »
FLAGRO USA - Turning up the Heat on Outdoor Grills!
Burnsville, MN - Silver Giant Grill, Model SGC-72N (Natural Gas) from Flagro USA was recently installed in the Student Union Cafeteria at a California University. Although this unit can be purchased as a built-in model for a more permanent and upscale application, the university decided to purchase the portable model which was more suited to their needs. The 48 Silver Giant Grill was introduced...
Read More »
PSL Will Exhibit Their Groundbreaking High Containment Filter Dryer (Filterbox) - for the New Helsinn Cytotoxic Facility - at Achema 2012 (Stand C31, Hall 5.1)
Powder Systems Ltd (PSL) supports Helsinn Advanced Synthesis SA's expansion into the cytotoxic market with their revolutionary contained filtration and drying technology. Helsinn Advanced Synthesis SA (HAS), located in Biasca, Switzerland, is the chemical manufacturing business unit of the Helsinn Group. To meet the demand of anticancer molecules, HAS is in the process of building a dedicated...
Read More »
ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services
J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!
Read More »
