Air / Gas Compressors

Air Generators eliminate gas cylinders from laboratory.

Available in 8 models, Balston® UHP Zero Grade Air Generators produce up to 280 lpm of hydrocarbon-free air from existing compressed air supply, allowing gas cylinder users to supply, control, and automate gas supplies. Zero air purity exceeds cylinder gas quality as hydrocarbon content is less than 0.05 ppm and is measured as methane. Units are suited for supplying air to LC mass...

Read More »
Lasers

Laser System processes 2D and 3D material.

With standard laser technology tables, TruLaser Cell Series 7000 facilitates welding up to 7 kW as well as high-speed cutting up to 6 kW, resulting in cutting speeds up to 1,575 ipm. TopsViewer graphical editor allows user to adapt processing program to minimize positioning times of new parts, while LensLine lens monitoring sensors prevent dirty focusing lens from being destroyed. Two axis...

Read More »
Combination Laser-Punch System can punch, form, tap and cut.
Presses

Combination Laser-Punch System can punch, form, tap and cut.

Combining 20 ton programmable hydraulic press drive and Fanuc fast axial flow CO2 laser technology, STRIPPIT LP-1225 laser punch has capacity to process 49.21 x 98.4 in. maximum sheet size with 0.250 in. maximum material thickness. System features low noise/scratch sensitive brush bed system to process lighter gauge components, and can be integrated with pick-sort robotic material and part...

Read More »
Automatic Video Trackers fuse images from multiple sources.
Miscellaneous Boards

Automatic Video Trackers fuse images from multiple sources.

When configured with IMP20 Video Processing Mezzanine Card, ADEPT104 and AIM12 provide system for detecting, tracking, stabilizing, and fusing images from multiple sensors and cameras in real-time. Full-frame, multi-resolution image fusion algorithm enables intelligent management and interpretation of multiple parallel visual information streams. Also included, warp engine provides rotation,...

Read More »
Receiving/Inspection Platform meets needs of wineries.
Conveyors

Receiving/Inspection Platform meets needs of wineries.

Constructed of stainless steel, Grape Receiving and Inspection Platform (GRIP) receives entire contents of fruit bin and meters out even flow of grape clusters for inspection without bridging or plugging. Able to handle up to 10 tons of product/hr with adjustable speed control, hopper and vibratory shaker solution presents uniform layer of product to facilitate spotting and removing undesirable...

Read More »
Fasnap® Corp. Offers New Dies for Electric Kick Press Machine
Presses

Fasnap® Corp. Offers New Dies for Electric Kick Press Machine

Fasnap® has introduced three new die sets to work with the electric kick press. For easier installation, cutting dies are now available for the One-Way-Lift® socket and clinch plate. New setting dies make attaching the SnapFast® product line simple, quick and uniform. Lastly, attaching the 4-prong eyelet and plain washer in the turn button fastener line just became easier with a...

Read More »
Solution Slats for Laser Cutting Users
Slats

Solution Slats for Laser Cutting Users

ST. PAUL, MINN. - Laser cutting machinery owners in St. Paul, Minnesota offer a simple alternative to replacing your laser cutting slats. Typically, laser users would operate using steel slats because of the stigma of costly replacement copper slats. However the steel slats suffer a short life span due to slag build up and a high wear rate. The common misconception about copper laser cutting...

Read More »
Self-Contained System processes septage from vacuum trucks.
Pump Stations

Self-Contained System processes septage from vacuum trucks.

Offered in 3 models providing 1-4 stages of processing, SPIRALIFT® SR automates receiving of septage/wastewater from vacuum trucks. It features Operator Station that identifies haulers via keypad entry/credit card as well as septage receiving station that incorporates fine screening shaftless screw system, spray wash, dewatering zone, and complete controls. Compacted solids are conveyed to...

Read More »
Parts Cutting Machine supports high production rates.
Pulleys

Parts Cutting Machine supports high production rates.

Utilizing flywheel with up to 8 knives, Model 50 Flywheel Cutter/Puller Systems produce extruded plastic or rubber parts such as washers, spacers, and other small parts at cutting rates from 75-12,000 parts/min and can hold cut length tolerance to ±0.003 in. Electronically linked flywheel and puller drives ensure consistent part length accuracy, while color touch screen interface...

Read More »
Adhesive Melter offers field-interchangeable platen faces.
Dispensers

Adhesive Melter offers field-interchangeable platen faces.

Featuring touch-screen PLC HMI, DM55 DynaDrum(TM) offers adhesive flow rate of up to 600 lb/hr, and up to 25,000 lb of platen force. It incorporates modular heated platen offering heat capacity of 35 kW at operating temperature of 400°F, and features fully adjustable drum retention system, 7-day timer, self-diagnostics, and drum low and empty indicators. Unit utilizes standard 240 Vac,...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics