Other

Fluid & Gas Flow Equipment

Cast Steel Flanged Gate and Swing Check Valves meet ASTM A216 WCB standards.

Jan 17, 2018

150 lb. Cast Steel Flanged Gate and Swing Check Valves are offered in sizes ranging from 1/4 up to 2 in. with flanged ball valves from 1 to 6 in. 400CSF Gate Valves and 422CSF swing check valves come with bolted bonnet whereas 405CSF Globe Valves feature outside screw and yoke. Units offer maximum pressure and temperature of 285 PSI and 1000ºF respectively.

Read More

Fluid & Gas Flow Equipment

Cylinder Return Double Valves feature pneumatic controls.

Dec 22, 2017

Cylinder Return Double Valves are available in 3/2 and 5/2 RSe models. Units are used to monitor safe air supply/exhaust and safe cylinder return applications. Products are offered in port sizes ranging from 1/8 in. to 1/2 in. and come with spring return feature. These valves are equipped with two PNP proximity sensors.

 

Read More

Fluid & Gas Flow Equipment

Mueller Swing Check Valves come in ductile iron construction.

Dec 19, 2017

Mueller Swing Check Valves are available in 2, 14, and 16 in. sizes and are UL-listed. Units feature bronze to BUNA seating, lifting rings, PN16 drilling, bosses and a drain plug. Products are rated at 350 psig cold working pressure and are FM-approved.

Read More

Fluid & Gas Flow Equipment

Drain Valves come in injection molded plastic construction.

Dec 13, 2017

Drain Valves are available in seven models and are suitable for tunnel, batch and coin-op washers. Units feature integrated AC motors and motor protectors. Products offer variety of configurations such as inlet and outlet port sizes, motor voltage and cycles and housing color.

Read More

Fluid & Gas Flow Equipment

PST30 Diverter Valve comes in aluminum or 316 stainless steel housing.

Dec 09, 2017

PST30 Diverter Valve comes with internally shim-able positive stops, inflatable pneumatic seals and end plates. Unit features plugs, inlet and outlet ports flanged which mates with 150# ANSI or 10N-DIN flange patterns. Product offers 145° port-to-port rotation, 2-way switching capability and external tunnel position indication. Valve is equipped with pneumatic actuator which offers 4 second... Read More

Fluid & Gas Flow Equipment

Singer Pressure Management Valve is operated based on flow rates.

Dec 06, 2017

Singer 106/206 PGM-2PR-630-SM Pressure Management Valve comes with integral back up and is available in sizes 4-12 inches (DN100-DN300). This hydraulic unit comes with a minimum pressure at the inlet of 29 PSI. Product is equipped with pressure pilots and used paddle style orifice plate.

Read More

Fluid & Gas Flow Equipment

Pressure Management Valve automatically adjusts to optimal downstream pressure.

Dec 05, 2017

106/206 PGM-2PR-630-SM Pressure Management Valve is offered in 4-12 in. sizes with minimum pressure of 29 PSI. Built on the 206 PGM or 106 PGM, unit’s integral backup system protects against diaphragm or pilot failure. The valve works on the flow signal received from the orifice plate. Valve prevents unwanted pressure spikes.

Read More

Fluid & Gas Flow Equipment

Jerguson 360 Series Safety Ballcheck Valves come with cleanout port.

Nov 28, 2017

Jerguson® 360 Series Safety Ballcheck Valves are equipped with locking pin and lock-out tag-out slot. Units are API 641 and ISO 15848-1 certified and meet API Class V shutoff requirements. Products are integrated on armored glass gage and quarter-turn position visible handle.

Read More

Fluid & Gas Flow Equipment

Leaded and Lead-Free Brass Ball Valves are UL/FM approved.

Nov 08, 2017

Leaded and Lead-Free Brass Ball Valves are available in sizes ranging from ¼ in. to 4 in. Units feature a two-piece forged body design and come with 600PSI Non-Shock WOG 125PSI SWP rating. Products offer PTFE seats and a locking device on the handle.

Read More

Fluid & Gas Flow Equipment

759 Ball Valves are rated to CSA Gas standards.

Oct 26, 2017

759 Ball Valves are available in 759LHLF (Locking Handle) and 759TLF (Tee Handle) models and are suitable for industrial steam, water, oil, gas and air applications. 759LF is offered in 1/4 to 1 in. sizes whereas 759LHLF in IPS sizes 1/4 to 4 in. 759TLF comes in 1/2 in. to 1 in. IPS and CxC sizes. 759TS and 759TSLF valves comes in 1/2 in. to 1 in. sizes.

Read More

Fluid & Gas Flow Equipment

GEMܒs Conexo System comes with cloud connection.

Oct 06, 2017

Conexo System enables retrofitting of GEMÜ valves in existing systems and product from third-party providers with GEMÜ CONEXO. These retroftting units are integrated into intended software environment. Various options are available for identifying plant components. RFID reader can trace and read valve components such as the body, actuator or diaphragm.

Read More

Fluid & Gas Flow Equipment

Lee FLOSERT Miniature Flow Regulating Valves

Oct 04, 2017

Lee Floserts are pressure compensated flow control valves that provide a constant flow over a wide range of differential pressures. The Flosert operates by sensing the flow rate in terms of a differential pressure across a fixed orifice. A variable metering orifice then automatically adjusts to keep this pressure, and thus the flow rate, constant.

Lee Floserts are useful for controlling... Read More

Fluid & Gas Flow Equipment

Pneumatic Diaphragm Valve is suitable for open/close applications.

Oct 04, 2017

Type 604/605 Pneumatically Actuated Dosing Valve is offered in PVC, CPVC, PROGEF standard PP and SYGEF standard PVDF body materials. Unit is operated in a temperature range of -4 to 284°F and features threaded bonnet design. Corrosion resistant valve is pressure rated at 90 psi and comes in a small footprint. Product comes with oversized pneumatic ports.

Read More

Fluid & Gas Flow Equipment

250 Series Solenoid Valve features MultiSeal technology.

Sep 27, 2017

250 Series Solenoid Valve is available in single and dual coil models. Unit is designed for 28 volt systems and comes with omni-directional design. Product features piloting solenoid coil. Single coil model weighs 0.14 lbs and consumes 7.8 watts at 28 Vdc.

Read More

Fluid & Gas Flow Equipment, Sensors Monitors & Transducers

Aquatrol's Safety Valves meet CE standards.

Sep 09, 2017

Aquatrol's Series 560 and 740 Safety Valves provides oxygen cleaning, various connections like tri-clover and polishing to Ra standards. These valves come with dual-lapping process that creates seat tightness for all metal to metal seated valves. Units can be packaged for cryogenic service.

Read More

Fluid & Gas Flow Equipment

Low Cost One-Way Valve for Specific Flow Rate and Pressure

Sep 06, 2017

This low cost accessory has been designed and constructed to pass a maximum of 7.5 litres/min and 0.5 bar pressure.

Other versions of 1bar and above are also available.

Designated “PurgeGate®”, this nifty, hi-tech item has applications in both fluid and gas control. Its small size and low weight makes it valuable for small liquid dispensing machines, as well as large ones... Read More

Fluid & Gas Flow Equipment

Matco-Norca Expands Industrial Products Line

Aug 22, 2017

Company Offers Full Selection of Industrial Grade Stainless Steel & Carbon Steel Valves & Fittings/Nipples

Brewster, NY, August 21, 2017 – Matco-Norca has expanded its line of industrial grade products with the addition of stainless steel and carbon steel valve offerings as well as stainless steel fittings and nipples. Industrial products from Matco-Norca also include actuated direct... Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

PURGENVENT Air Venting Valves feature built in Purge Valve.

Aug 16, 2017

PURGENVENT™ Air Venting Valves are offered in Manual (7910MAV), Automatic (7900AAV), and Inline (7950ILV) models. Units are designed for removing excess air from sprinkler pipes. The 7910MAV valve is ½ in. ball valve with integral strainer and check valve. The 7900AAV valve comes with integral isolation valve, strainer, purge valve and automatic air vent and. 7950ILV uses inline air/water... Read More

Fluid & Gas Flow Equipment

4-Port & 6-Port Selectors Join the Beswick Family of Selector, Mixing Diverting, and On/Off valves. A Great Endeavor

Aug 02, 2017

Approximately “Four score and seven months ago…” (time flies when you are working in high technology product development) Beswick introduced the smallest 10-32 UNF threaded ball valve in the world. Soon after that, our mixing/diverting model (conceived in liberty) took home “The Best New Product” award in 2011. A few years later, we created a larger ¼-28 UNF threaded on/off ball... Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

RAVE Valves offer effortless operation to air sampling canisters.

Aug 02, 2017

Restek Air Valve Excellence Valves are used for 3.2 L, 6 L, and 15 L Entech air sampling canisters. Designed to provide more than 15,000 cycles, units feature W-type seats that are resistant to damage. Offering full closure with a quick twist of the fingers (only 10 in-lb), units are leak-tested with helium to 1×10-6 mL/sec.

Read More